+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IC693PWR322 | GE 30 W Standard Power Supply Module

Introduction:

The GE IC693PWR322 is a discontinued Series 90-30 standard power supply with 24/48 VDC input, three outputs, and RS485 communication for legacy control systems.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IC693PWR322
Type: Standard Power Supply
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

How Do You Keep a Legacy Series 90-30 Panel Powered When the Original Supply Fails?

The GE IC693PWR322 is a standard power supply module for the GE Fanuc Series 90-30 platform, rated at 30 Watts with a nominal input of 24 or 48 VDC. It delivers three outputs and includes an RS485 port for programming devices. This module is listed as discontinued/obsolete, so verify current lifecycle status and availability with PetroPartsOnline before ordering.

Engineers maintaining aging control systems face a common challenge: the power supply is often the first component to fail, yet the rest of the panel remains serviceable. This power supply addresses this by providing a rugged, field-proven design that has supported mission-critical operations in demanding environments. Its multiple outputs and communication port make it a central point for backplane power and external device connectivity.

Figure 1: Front view of the GE IC693PWR322 Standard Power Supply showing its physical design and enclosure.

What Are the Key Technical Specifications of this power supply?

The module's specifications are summarized below. All values are taken directly from the manufacturer's data.

  • Input Voltage Range: DC Start: 21 to 56 VDC; Run: 18 to 56 VDC
  • Nominal Rated Voltage: 24 VDC / 48 VDC
  • Input Power: 90 VA with VAC input; 50 W with VDC input
  • Output Power: 5 VDC and 24 VDC Relay: 15 watts maximum; 24 VDC Isolated: 20 watts maximum
  • Holdup Time: 14 milliseconds, minimum
  • Inrush Current: 4 A peak, 100 ms maximum
  • LED Indicators: PWR, OK, RUN, BATT
  • Communication: RS485 (9-pin sub-D connector)
  • Number of Outputs: Three (3)
  • Product Lifecycle Status: Discontinued/Obsolete

Operating temperature is not specified in the provided data; refer to the official datasheet for thermal ratings. The input voltage range is wide enough to accommodate typical industrial DC buses, and the holdup time of 14 ms helps ride through brief interruptions.

How Does this power supply Support Series 90-30 Backplane and I/O Modules?

Each output serves a specific function. The +5 VDC output provides backplane power to the rack. The +24 VDC Relay output supplies power to circuits on Series 90-30 Relay modules. The +24 VDC Isolated output is used by some modules attached to the backplane and also provides external power to 24 VDC input modules. This distribution ensures that both logic and field-side circuits receive the voltages they require.

The module also hosts the RAM battery, which retains RAM contents when main power is removed. This battery may be replaced with the IC693ACC301. The RS485 port allows connection of a programming workstation, a GE Fanuc Hand-Held Programmer, or other devices compatible with the RS485 standard. A 15-pin D-type female connector is accessible via a hinged door on the front panel, providing a means of communication to a PLC serial port.

Figure 2: Technical layout and connection details for the GE IC693PWR322 Standard Power Supply.

What Causes Power Supply Failures in Harsh Environments?

Power supplies in oil and gas installations endure temperature swings, vibration, and electrical noise. Common failure modes include capacitor degradation, battery depletion, and damage from inrush currents. This power supply is built for demanding environments, with an inrush current rating of 4 A peak for 100 ms maximum and input overvoltage protection connected internally to Pin 4 of the terminal board. The holdup time of 14 ms and ride-through time of 10 ms maximum help maintain output during short supply disturbances.

To extend service life, inspect the module periodically for signs of overheating or battery leakage. The RAM battery should be replaced according to the maintenance schedule to prevent data loss. Always disconnect input power completely before installation or service to avoid electrical damage.

How Do You Integrate this power supply into an Existing Control System?

The module mounts in a Series 90-30 rack and connects to the backplane. Wiring involves the input power terminals and the RS485 port. For RS485 communication, use shielded twisted-pair cable and observe proper termination. When connecting to a programming workstation or hand-held programmer, confirm that the device supports the RS485 standard. The 15-pin D-type connector provides a serial link to a PLC port.

Because the module is discontinued, integration may require sourcing from surplus or refurbished stock. PetroPartsOnline can provide application-specific selection guidance to ensure compatibility with your existing Series 90-30 components. Contact PetroPartsOnline for parts suited to your application's requirements.

Frequently Asked Questions

What is the input voltage range of the GE this power supply?

The GE this power supply accepts a DC input range of 21 to 56 VDC for start and 18 to 56 VDC for run, with a nominal rating of 24 or 48 VDC.

How many outputs does this power supply provide?

The GE this power supply has three outputs: +5 VDC for backplane power, +24 VDC Relay for relay module circuits, and +24 VDC Isolated for external power to 24 VDC input modules.

What is the holdup time of this power supply?

The GE this power supply provides a minimum holdup time of 14 milliseconds, helping to maintain output during brief input power interruptions.

Is this power supply still available?

The GE this power supply is listed as discontinued/obsolete. Please verify current lifecycle status and availability with PetroPartsOnline before ordering.

What communication port does this power supply have?

The GE this power supply includes one RS485 communication port using a 9-pin sub-D connector, allowing connection to programming workstations and compatible devices.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap