+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IC755ACC15MNT | GE Quickpanel+ 15-Inch Accessory Kit

Introduction:

The GE IC755ACC15MNT accessory kit restores mounting clips and power and serial connectors on 15-inch Quickpanel+ terminals, keeping critical HMI units in service.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IC755ACC15MNT
Type: Accessory kit
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The GE IC755ACC15MNT accessory kit is a field replacement set for 15-inch Quickpanel+ operator terminals. It bundles mounting clips plus power and serial port connectors, so a damaged interface or loose panel can be restored without scrapping the whole unit. Each kit weighs 3.00 lbs (1.36 kg).

Why this unit Matters on a Live Panel

An HMI that loses a mounting clip or a connector body often drops out of service at the worst moment. On a wellhead control panel or a compressor station skid, a loose terminal can interrupt operator visibility during a shift change. This kit addresses that failure mode directly. It supplies the exact clip and connector hardware used on 15-inch Quickpanel+ units, so maintenance teams can replace broken or missing parts and return the panel to service.

The kit also serves as a spares buffer. Because the contents cover both mounting and wiring interfaces, a single part number covers the most common wear points on the terminal enclosure. That reduces the number of line items a storeroom must carry for a Quickpanel+ fleet.

Figure 1: Front view of the GE IC755ACC15MNT Accessory kit showing its physical design and enclosure.

Key Specifications and What They Mean in the Field

  • Product type: Accessory kit for Quickpanel+ terminals.
  • Compatibility: 15-inch Quickpanel+ units.
  • Contents: Mounting clips, power and serial port connectors.
  • Voltage type: DC.
  • Supported voltage: 12/24 Volts DC.
  • Power consumption rating: 30 Watts.
  • Weight: 3.00 lbs (1.36 kg).

The DC voltage rating aligns with the 12/24 Volts DC input range of the host terminal. The power connector is a Tyco Electronics 284510-3 type, which accepts either +24 Volts DC or +12 Volts DC inputs. The serial connector is a Tyco Electronics 284510-5 type, rated for AWG 30 to AWG 14 wire and for 167 degrees Fahrenheit. Screw torque for attaching the connector is 0.3 N-m.

Power draw on the host unit is 30 Watts, with current draw of 1.25 Amps at 24 Volts DC and 2.5 Amps at 12 Volts DC. These figures help a maintenance planner confirm that the panel supply and wiring remain within the terminal's operating envelope after a connector replacement.

How Should Maintenance Teams Install the Kit?

Installation is a hardware task, not a configuration task. First, isolate panel power before touching any connector. Then remove the damaged clip or connector body and fit the replacement from the kit. Seat the power connector and tighten its screws to 0.3 N-m. Route serial wiring within the AWG 30 to AWG 14 range and observe the 167 degrees Fahrenheit wire rating. Finally, restore power and confirm the terminal boots normally.

One caution applies to the mounting clips. Repeated retightening of the clips can degrade the enclosure gasket, so tighten once and avoid routine re-torquing. This single practice protects the seal that keeps dust and moisture away from the electronics.

Figure 2: Technical layout and connection details for the GE IC755ACC15MNT Accessory kit.

Which Quickpanel+ Units Accept This Kit?

The kit is intended for Quickpanel+ units with 15-inch displays. Those terminals use a 15-inch TFT LCD screen with 1024 x 768 resolution, 65,536 colors, and 310 nits of brightness. The touchscreen is projected capacitive and supports 2-point multi-touch. Communications include two 10/100BaseT Ethernet ports with RJ-45 interface, one RS-232 port, one RS-232/485 interface, and two USB 2.0 interfaces supplying 5 Volts at 0.5 Amps. A lineout is provided for audio output. Noise immunity is rated at 1500 Volts peak to peak with 1 microsecond pulse duration and 1 nanosecond rise time.

Because the kit is matched to the 15-inch enclosure, it should not be fitted to other display sizes. Confirm the terminal model before ordering.

Reliability Practices for Quickpanel+ Fleets

Inspect mounting clips during scheduled shutdowns and replace any clip that shows cracking or loss of spring tension. Check connector screw torque after any panel vibration event. Keep spare kits in stores so a failed clip does not idle a mission-critical HMI. The kit is built for demanding environments where uptime matters, and it supports reliability you can depend on across a terminal fleet.

Contact PetroPartsOnline for parts suited to your application's requirements.

Frequently Asked Questions

What does the GE IC755ACC15MNT kit contain?

The GE IC755ACC15MNT kit contains mounting clips plus power and serial port connectors. It is intended for replacing broken or missing parts on 15-inch Quickpanel+ units.

Which terminals are compatible with the IC755ACC15MNT accessory kit?

The IC755ACC15MNT accessory kit is compatible with Quickpanel+ units that have 15-inch displays. It should not be fitted to terminals of other display sizes.

What voltage does the power connector support?

The power connector in the GE IC755ACC15MNT kit is a Tyco Electronics 284510-3 type. It accepts either +24 Volts DC or +12 Volts DC inputs, matching the DC input range of the host terminal.

What torque should be used when attaching the connector screws?

The recommended torque for attaching the connector screws is 0.3 N-m. Repeated retightening of the mounting clips should be avoided because it can degrade the enclosure gasket.

What wire sizes does the serial connector accept?

The serial connector is a Tyco Electronics 284510-5 type. It accepts AWG 30 to AWG 14 wire rated for 167 degrees Fahrenheit.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap