+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IS220PIACH2A | GE Analog I/O Module for Mark VIe Control

Introduction:

The GE IS220PIACH2A analog I/O module connects up to ten analog inputs to Mark VIe turbine control systems, delivering dependable signal acquisition for critical operations.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IS220PIACH2A
Type: Analog I/O Module
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

What Is the GE IS220PIACH2A Analog I/O Module?

The GE this module is an analog I/O module built for the Mark VIe turbine control system. It handles up to ten analog inputs and two current loop outputs, making it a rugged interface for mission-critical signal acquisition in oil and gas environments. This module is available in stock and manufactured in the United States.

Figure 1: Front view of the GE IS220PIACH2A Analog I/O Module showing its physical design and enclosure.

Key Features and Technical Specifications

  • Analog Inputs: Ten total inputs; first eight configurable to ±5 V, ±10 V, or 0–20 mA current loop.
  • Additional Inputs: Final two inputs configurable to ±1 mA or 0–20 mA current inputs.
  • Current Loop Outputs: Two outputs ranging from 0 to 20 mA; first output supports 0–200 mA.
  • Ethernet Connectivity: Dual RJ-45 Ethernet ports for communication with one or two I/O networks.
  • Power Input: Three-pin connector; soft-start capability controls inrush current on power application.
  • Field Connection: DC-37 pin connector directly attaches to the terminal board.
  • Diagnostics: Visual LEDs including PWR, ATTN, and LINK; infrared port for local serial diagnostics.
  • Circuitry Protection: Conformal coat (sprayed) for harsh environments.
  • Series: Mark VIe (Group 2 device).
  • Country of Origin: United States (USA).

How Does this module Integrate with Mark VIe Systems?

The module serves as an electrical interface between one or two I/O Ethernet networks and an analog input terminal board. It receives data through dual RJ-45 connectors and communicates with field devices via a DC-37 pin connector. The processor board is standard across Mark VIe distributed I/O packs, while the acquisition board is specific to analog input functions. For configuration, the ToolboxST application is used. When wiring into Ethernet networks, confirm cable and gateway requirements with PetroPartsOnline to ensure compatibility with your existing infrastructure.

Figure 2: Technical layout and connection details for the GE IS220PIACH2A Analog I/O Module.

What Are the Power and Environmental Considerations?

this module is powered through a three-pin connector. Its inherent soft-start capability controls current inrush on power application, so disconnecting power before plugging in the connector is not necessary. The conformal coat (sprayed) on the base circuitry provides protection against environmental factors, supporting reliable operation in demanding oil and gas settings. For specific operating temperature and input voltage ranges, refer to the official GE datasheet.

Installation and Setup

Securely mount the terminal board of choice, then insert the I/O pack directly into the terminal board connectors. Use the threaded studs adjacent to the Ethernet ports to mechanically secure the pack; the studs fit into a terminal board-specific mounting bracket positioned to avoid right-angle force on the DC-37 connector. Depending on system configuration, connect one or two Ethernet cables—the pack functions on either port. For dual connections, it is common practice to connect ENET1 to the network associated with the R controller. Finally, configure the pack using the ToolboxST application.

Maintenance and Reliability

Periodic inspection of the diagnostic LEDs (PWR, ATTN, LINK) helps identify potential issues early. The conformal coating protects the circuitry from contaminants, extending service life in harsh environments. The infrared port enables local diagnostic serial communications for troubleshooting without disassembly. As with any mission-critical component, follow the manufacturer's safety manual and inspect regularly to maintain reliability you can depend on.

Frequently Asked Questions

What is the GE this module used for?

The GE this module is an analog I/O module for the Mark VIe turbine control system. It connects up to ten analog inputs to the control network, serving as an interface between I/O Ethernet networks and an analog input terminal board.

How many analog inputs does this module support?

this module supports ten analog inputs. The first eight can be configured to ±5 V, ±10 V, or 0–20 mA, while the final two accept ±1 mA or 0–20 mA inputs.

What power supply does this module require?

this module is powered via a three-pin connector. It features soft-start capability that controls current inrush, so you do not need to disconnect power before plugging in the connector.

What are the diagnostic features of this module?

this module includes visual LEDs such as PWR, ATTN, and LINK, plus an infrared port for local diagnostic serial communications.

Is this module available for immediate shipment?

Yes, this module is in stock and ready to ship from PetroPartsOnline. Contact PetroPartsOnline for parts suited to your application's requirements.

For application-specific selection guidance and reliable sourcing of this module, contact PetroPartsOnline.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap