+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

Automation Fair 2026 Opens in Boston: Software-Defined Automation Takes the Stage

2026-11-16
Industrial robot arm working on an automated manufacturing line
ExcerptAutomation Fair 2026 runs 16-19 November at the Menino Convention Center in Boston. LogixEdge and PanelView Pro launched days before the doors opened, SecureOT is not a debut, and the 14,000-attendee figure is a projection.

TL;DR: Rockwell Automation's Automation Fair 2026 runs 16–19 November at the Thomas M. Menino Convention & Exhibition Center in Boston, and it opens on Monday 16 November with a 1:00 p.m. keynote; the expo floor opens on Tuesday 17 November at 9:45 a.m. Rockwell's own pre-show release projects “more than 14,000” attendees and describes “more than 150 interactive exhibits” — both are projections published on 13 August 2026, not audited attendance. Two of the three products most often tied to the show were launched before it opened: LogixEdge controllers on 12 November and PanelView Pro on 10 November. SecureOT is not a debut at all; it is an existing cybersecurity suite that was expanded three times during 2026. FactoryTalk Conductor, an AI-native orchestration platform announced on 21 October, does make its public debut here.

Rockwell Automation holds Automation Fair in a different city each year, so the first thing worth checking about any 2026 story is the venue. This year it is Boston, and the event occupies the same four-day slot as always: Monday through Thursday, 16–19 November. The theme is “Future in Focus.”

Verification note: this article was written before the Monday keynote took place, so it describes what Rockwell has published and scheduled rather than what was said on stage. Every figure below is attributed to the document that carries it, because three of the numbers circulating in trade coverage are not quite the numbers Rockwell published.

When and where is Automation Fair 2026?

Automation Fair 2026 runs 16–19 November 2026 at the Thomas M. Menino Convention & Exhibition Center (MCEC), 415 Summer Street, Boston, Massachusetts 02210. Monday is given over to training, off-site tours and half-day summits plus a 1:00–2:15 p.m. keynote; the exhibition floor opens on Tuesday at 9:45 a.m. and runs to 5:00 p.m.

The shape of the week matters more than usual, because the schedule separates the announcements from the demonstrations. Monday's keynote slot is filled by Colonel Chris Hadfield, the former commander of the International Space Station, speaking on managing risk and change rather than on products. The Rockwell business keynote, led by chairman and CEO Blake Moret, is on Tuesday morning and is described in the agenda as covering “new product launches to the technologies expanding what is possible.” Wednesday's keynote pairs Adam Savage with Rockwell leaders on innovation.

The published programme for the week is substantial: more than 250 educational sessions, more than 500 hours of advanced training, six off-site plant tours and five half-day summits. Two of the summits are directly relevant to controls engineers — the Process Solutions User Group summit on Monday and the Secure Digital Operations summit on Tuesday, sponsored by Cisco.

What is Rockwell presenting at Automation Fair 2026?

Four offerings carry most of the story, and they are in four different states. LogixEdge and PanelView Pro are new products launched in the week before the show. SecureOT is an existing portfolio that was expanded during 2026. FactoryTalk Conductor is pre-release software making its first public appearance, with commercial availability planned for the first quarter of 2027.

OfferingStatus at the showAnnouncedAvailabilityWhat it changes
LogixEdge controllersNewly launched, first public showing12 Nov 2026Q4 calendar 2026Logix control, edge computing and containerised workloads on one industrial PC
PanelView Pro terminalsNewly launched, first public showing10 Nov 2026Q4 calendar 2026; more modules through 2027FactoryTalk View ME application reuse, modular display and logic, common cutouts from PanelView Plus 7 Performance
SecureOTExisting suite with 2026 additionsPlatform launched earlier; expanded 9 Jun, 6 Oct and 29 Oct 2026Available as services todayOT cybersecurity assessment, managed services, Fortinet firewall support, OEM compliance tooling for the EU Cyber Resilience Act
FactoryTalk ConductorPublic debut, pre-release21 Oct 2026Q1 2027AI-native orchestration across Studio 5000 Logix Designer, Logix Echo, Emulate3D and FactoryTalk Optix

The LogixEdge controller launch is the one with the widest architectural implications. Rockwell describes it as an industrial PC-based platform that runs a Logix engine alongside containerised applications, with Docker and Kubernetes support listed on the product page rather than in the release. It is positioned as an alternative to running a controller and a separate edge computer side by side, and Rockwell lists availability as the fourth quarter of calendar year 2026. The article linked above covers the published specifications, the single catalogue number in the launch material and the details Rockwell has not disclosed, including price, environmental ratings and safety certification.

PanelView Pro has a narrower but more immediate audience. It is built for FactoryTalk View Machine Edition applications and is sold on migration rather than on new capability: Rockwell says it supports “common cutouts” from PanelView Plus 7 Performance terminals and separates display and logic modules so either can be replaced on its own. The PanelView Pro cutout reuse analysis examines whether that claim holds size by size, and at the time of writing Rockwell had not published a per-size cutout table.

SecureOT is the one item that should not be described as a launch. The suite, which includes what was formerly the Verve Security Center, was expanded in June 2026 with an OT cybersecurity assessment suite and managed services, in October with support for Fortinet firewalls, and again on 29 October with capabilities aimed at OEMs facing the EU Cyber Resilience Act. The SecureOT and CRA compliance article explains why the machine asset record, not the firewall, is the hard part of that regulation.

FactoryTalk Conductor is the genuinely new thing on the show floor. Rockwell calls it an AI-native orchestration platform and is explicit that it is connecting several AI agents and software tools rather than shipping another single-task copilot. At launch it is designed to work with Studio 5000 Logix Designer, Logix Echo, Emulate3D and FactoryTalk Optix, with FactoryTalk Design Studio, FactoryTalk Historian, Plex and Fiix planned to follow. Rockwell says attendees will see demonstrations in the Technology & Services Showcase, the Industry Pavilion, the Innovations area and dedicated technical sessions. Commercial availability is planned for the first quarter of 2027.

Are the 14,000-attendee and 150-exhibitor figures official?

Both come from Rockwell's own registration announcement of 13 August 2026, and both are forward-looking. The release says the event “will bring together more than 14,000” professionals and that the expo “will feature more than 150 interactive exhibits.” Neither figure is an audited attendance or exhibitor count, and Rockwell does not publish a PartnerNetwork-only exhibitor number at all.

That distinction is worth keeping, because the two numbers are routinely rewritten in coverage. “More than 150” refers to interactive exhibits and Discovery Theater presentations inside the expo, and the event FAQ repeats it as “150+ exhibitors.” It is not a count of PartnerNetwork members, and the official event page lists sponsors only by tier — Elite, Premium and Featured — without quantities. Describing the show as having “150 PartnerNetwork exhibitors” is therefore an inference, not a published fact.

Likewise, 14,000 is a projection made three months before the doors opened. Events of this type usually publish a post-show figure separately, and Rockwell has not done so yet. Any article that presents 14,000 as this year's attendance on opening day has converted a forecast into a result.

What does software-defined automation change for a Logix plant?

In Rockwell's usage, software-defined automation means separating software capability from dedicated hardware so that control, visualisation and analytics workloads can be deployed and updated independently of the box they run on. For an existing Logix plant, the practical changes are architectural rather than programmatic: the programming model stays, the hardware footprint and the software lifecycle change.

The first change is consolidation. LogixEdge puts the controller engine and container workloads on one device, which reduces the number of boxes in a cabinet and, more importantly, removes a network hop between control data and the application that consumes it. The second is lifecycle management: containers can be versioned, rolled back and pushed to many machines the same way, which is a different maintenance discipline from imaging individual PCs. The third is visualisation, where PanelView Pro's value is not a faster screen but the claim that an existing FactoryTalk View ME application and its panel cutout can survive the upgrade — a claim worth testing against the PanelView Plus 400 operator terminal and newer terminals already in service.

What does not change is equally important. No safety rating, ambient temperature range or ingress rating has been published for LogixEdge, so GuardLogix and ControlLogix-XT duties stay where they are. The installed base — 1756-L83E ControlLogix 5580 processors, 1756 I/O modules such as the 1756-IG16 DC input module, and the chassis around them — is not being replaced by anything announced this week. Rockwell has published no discontinuation notice for ControlLogix or PanelView Plus 7, and buyers comparing platforms should still treat the ControlLogix versus S7-1500 comparison as a live question rather than a settled one.

Which parts of the agenda matter to an engineer?

The technical value is concentrated in three places: the hands-on labs and product sessions, the two summits that deal with process control and secure digital operations, and the six off-site tours, which are the only part of the programme that shows these products running in someone else's plant rather than on a booth.

Monday offers 8:00 a.m. to 5:30 p.m. of advanced training sessions and labs alongside general access sessions, and the Process Solutions User Group summit runs 8:00 a.m. to 4:30 p.m. for level, flow, temperature and pressure applications. Tuesday adds the Secure Digital Operations summit from 10:00 a.m. to 2:00 p.m. and the OEM Leader-to-Leader summit from 11:30 a.m. to 3:30 p.m. Anyone intending to evaluate LogixEdge or FactoryTalk Conductor should book the product sessions rather than rely on booth conversations, because neither product has published a full technical reference yet: LogixEdge has a product page and a July 2026 product profile, and FactoryTalk Conductor has a press release and a FAQ.

The final day is shorter: on Thursday the expo runs 8:30 a.m. to 4:00 p.m. and the agenda counts “120+ exhibits” rather than 150+, which is another reason to treat the headline figures as round numbers rather than inventory.

The practical caution for the week is that launch dates and shipping dates are different things. LogixEdge and PanelView Pro are both listed as fourth-quarter 2026 availability, which means the quarter in which the show takes place, not the day of the show. FactoryTalk Conductor is a 2027 product being demonstrated in 2026. None of the three should be written into a project schedule on the strength of a booth demonstration.

Frequently asked questions

When and where is Automation Fair 2026?

Automation Fair 2026 runs 16–19 November 2026 at the Thomas M. Menino Convention & Exhibition Center, 415 Summer Street, Boston, Massachusetts 02210. Monday 16 November is dedicated to training, off-site tours and summits, with the opening keynote from 1:00 to 2:15 p.m. The expo floor opens on Tuesday 17 November at 9:45 a.m.

Are LogixEdge and PanelView Pro being launched at Automation Fair 2026?

No. Rockwell announced PanelView Pro on 10 November 2026 and LogixEdge controllers on 12 November 2026, both before the show opened. Automation Fair is where the two products are shown publicly for the first time, and Rockwell's LogixEdge release explicitly invites attendees to “see LogixEdge controllers in action” in Boston. Reporting them as show-floor launches overstates the news by a few days.

How many people attend Automation Fair 2026?

Rockwell projects more than 14,000 attendees in its 13 August 2026 registration announcement. That is a pre-event forecast, not a verified attendance figure, and Rockwell had not published a post-show count at the time of writing. The same release cites more than 150 interactive exhibits and more than 250 educational sessions.

Is SecureOT a new product at Automation Fair 2026?

No. SecureOT is an existing Rockwell cybersecurity portfolio that combines the SecureOT Platform, formerly the Verve Security Center, with professional and managed services. It was expanded three times in 2026: in June with an assessment suite and managed services, in October with support for Fortinet firewalls, and on 29 October with capabilities for OEMs preparing for the EU Cyber Resilience Act.

Does software-defined automation replace ControlLogix controllers?

Not according to anything Rockwell has published. LogixEdge extends the Logix portfolio with an industrial PC-based option that adds edge computing and container support; it does not carry a safety rating or published environmental ratings, and Rockwell has issued no discontinuation notice for ControlLogix or GuardLogix. For safety, harsh-environment and existing installed-base work, the current ControlLogix and GuardLogix families remain the documented choice.

Sources

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap