+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IS220PTCCH1B | GE Mark VIe Thermocouple Input Module

Introduction:

The GE IS220PTCCH1B Mark VIe thermocouple input module delivers 12 combustion-optimized inputs and one cold junction for turbine control.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IS220PTCCH1B
Type: Thermocouple Input Module consisting
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The GE IS220PTCCH1B is a Mark VIe thermocouple input module (I/O pack) with 12 combustion-optimized inputs and one cold junction. It accepts conventional thermocouples such as E, J, K, S, and T, plus mV inputs from -8 to 45 mV, and supports simplex, duplex, and triple modular redundancy configurations.

What makes this module suitable for turbine temperature monitoring?

This module is built for the Speedtronic Mark VIe gas turbine control platform, where temperature data drives combustion tuning and protection logic. Its 12 inputs are optimized for combustion monitoring, and the single cold junction provides the reference needed for thermocouple measurements. Because the same pack supports simplex, duplex, and triple modular redundancy, engineers can match the module to the reliability level their turbine control architecture requires.

Thermocouples E, J, K, S, and T may be grounded or ungrounded and can be placed up to 984 feet from the turbine I/O panel. Cable resistance must not exceed 450 ohms. These limits matter for cost planning: long cable runs can reduce installation expense by letting sensors sit closer to the measurement point, while the 450-ohm ceiling keeps wiring within a workable specification.

Figure 1: Front view of the GE IS220PTCCH1B Thermocouple Input Module consisting showing its physical design and enclosure.

Key features and technical specifications

  • Function: I/O pack for the Mark VIe series.
  • Inputs: 12 combustion-optimized thermocouple inputs plus 1 cold junction.
  • Thermocouple types: E, J, K, S, and T, grounded or ungrounded.
  • mV input range: -8 to 45 mV.
  • Maximum sensor distance: 984 feet from the turbine I/O panel.
  • Cable resistance limit: 450 ohms.
  • Redundancy: Simplex, duplex, and triple modular redundancy applications.
  • Power supply: 28 VDC.

The 28 VDC power supply aligns with the Mark VIe control cabinet distribution, so the pack can be integrated without a separate power conversion stage. From a cost standpoint, that simplifies cabinet wiring and reduces the number of components that must be stocked and maintained.

How does redundancy affect long-term operating cost?

Redundancy choices influence both availability and spares planning. A simplex arrangement uses one pack per input group, which keeps initial hardware cost lower. Duplex and triple modular redundancy add parallel packs so that a single failure does not interrupt temperature monitoring. For mission-critical turbine control, that can reduce unplanned downtime, though the trade-off is a larger spares inventory and more cabinet space.

this module supports all three configurations, so the same part number can serve different reliability strategies across a fleet. Standardizing on one module type can simplify procurement and reduce the number of distinct spares an operator must carry.

Figure 2: Technical layout and connection details for the GE IS220PTCCH1B Thermocouple Input Module consisting.

Installation and wiring considerations

Plan cable routes so that total resistance stays below 450 ohms. Because sensors may sit up to 984 feet from the I/O panel, verify wire gauge and termination quality before commissioning. Grounded and ungrounded thermocouples are both accepted, but the chosen grounding scheme should be consistent across the installation to avoid measurement errors.

The module is an I/O pack within the Mark VIe series, so it communicates through the turbine control architecture rather than acting as a standalone device. Confirm cabinet slot assignments and power distribution against the official GE documentation before installation.

Maintenance and reliability in demanding environments

Thermocouple input modules sit at the boundary between field sensors and control electronics, so they face temperature swings, vibration, and electrical noise. Periodic inspection of terminal tightness and cable condition helps catch resistance drift before it affects readings. Because the module supports redundant configurations, maintenance planners can schedule pack replacement during planned outages rather than reacting to failures.

Keeping spare I/O packs on hand supports faster recovery when a channel degrades. The 28 VDC supply and standard Mark VIe form factor mean replacement follows the same cabinet procedures as other packs in the series.

Frequently asked questions

What thermocouple types does this module accept?

The GE this module accepts E, J, K, S, and T thermocouples, either grounded or ungrounded, along with mV inputs from -8 to 45 mV.

How many inputs does this module provide?

The GE this module provides 12 combustion-optimized thermocouple inputs and one cold junction.

What is the maximum cable resistance for this module?

Cable resistance for the GE this module must not exceed 450 ohms, and sensors may be placed up to 984 feet from the turbine I/O panel.

Can this module be used in redundant configurations?

Yes. The GE this module supports simplex, duplex, and triple modular redundancy applications within the Mark VIe control platform.

What power supply does this module require?

The GE this module operates from a 28 VDC power supply.

Contact PetroPartsOnline for parts suited to your application's requirements.

Frequently Asked Questions

What thermocouple types does the IS220PTCCH1B accept?

The GE IS220PTCCH1B accepts E, J, K, S, and T thermocouples, either grounded or ungrounded, along with mV inputs from -8 to 45 mV.

How many inputs does the IS220PTCCH1B provide?

The GE IS220PTCCH1B provides 12 combustion-optimized thermocouple inputs and one cold junction.

What is the maximum cable resistance for the IS220PTCCH1B?

Cable resistance for the GE IS220PTCCH1B must not exceed 450 ohms, and sensors may be placed up to 984 feet from the turbine I/O panel.

Can the IS220PTCCH1B be used in redundant configurations?

Yes. The GE IS220PTCCH1B supports simplex, duplex, and triple modular redundancy applications within the Mark VIe control platform.

What power supply does the IS220PTCCH1B require?

The GE IS220PTCCH1B operates from a 28 VDC power supply.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap