+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

DS200TBQBG1ACB | GE RST Termination Board Mark V

Introduction:

The DS200TBQBG1ACB is a GE Mark V RST Analog Termination Board with two 77-terminal blocks and 15 jumpers, built for dependable turbine control signal handling.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: DS200TBQBG1ACB
Type: Drive assemblies
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The GE DS200TBQBG1ACB is an RST Analog Termination Board from the Mark V Turbine Control System Series. It provides 154 terminals across two terminal blocks for routing voltage, vibration, and pulse rate signals between drive components. Each connection supports centralized data handling that reduces wiring complexity and long-term maintenance costs.

What makes this drive a cost-efficient choice for turbine control?

This board consolidates critical input signals onto a single assembly, which lowers the expense of distributed wiring and simplifies troubleshooting. This drive carries 15 jumpers that configure analog inputs and pressure transducer signals without external hardware. That built-in flexibility helps avoid additional configuration modules and their associated costs.

Designed for demanding environments, the board uses normal PCB coating to protect against contaminants common in turbine enclosures. Its two terminal blocks each contain 77 terminals, giving technicians ample termination points for signal wires. The 154 total terminals reduce the need for intermediate terminal strips, which can add material and labor costs to a project.

Figure 1: Front view of the GE DS200TBQBG1ACB Drive assemblies showing its physical design and enclosure.

Key features and technical specifications

  • Manufacturer: General Electric
  • Series: Mark V
  • Part Number: this drive
  • Functional Acronym: TBQB
  • Functional Description: RST Termination Board
  • PCB Coating: Normal Coating
  • Functional Revision 1: A
  • Functional Revision 2: C
  • Artwork Revision: B

The board also includes 3 34-pin connectors and 3 16-pin connectors for interfacing with other Mark V boards. These connectors are labeled with factory-printed nomenclature, which speeds installation and reduces wiring errors that can lead to costly downtime.

How does this drive integrate with Mark V cores?

In the R2 core, the board connects to TCQA and TCQC boards located in the R1 core. In the R3 core, it connects to TCQA and TCQC boards within the same core. This dual-core configuration supports localized signal processing, which can improve response times and reduce the load on centralized controllers.

The JGR connection transmits vibration signals along with analog current and voltage signals to the board. The JHR connection handles pulse rate inputs and compressor stall detection inputs, directing them to the TCQC board. By centralizing these signals, this drive helps operators implement predictive maintenance, potentially avoiding unplanned outages and their high costs.

Figure 2: Technical layout and connection details for the GE DS200TBQBG1ACB Drive assemblies.

Installation and maintenance guidance

When replacing the board, label each signal wire with its terminal block and terminal number. Use a screwdriver to release wires from the terminals, then insert the bare copper end into the corresponding terminal on the replacement board and tighten the screws. This methodical approach prevents miswiring that could cause operational faults.

Periodic inspection of terminal connections and jumpers is recommended to maintain reliability. The normal PCB coating offers basic protection, but in harsh oil and gas environments, additional enclosure measures may be needed. Always follow the manufacturer's safety manual during maintenance.

Frequently asked questions

What is this drive used for?

The GE this drive is an RST Analog Termination Board in the Mark V Turbine Control System. It handles voltage, vibration, and pulse rate signals for turbine drive assemblies.

How many terminals does this drive have?

The GE this drive has two terminal blocks with 77 terminals each, totaling 154 terminals for signal wire connections.

What is the function of the jumpers on this drive?

The GE this drive includes 15 jumpers. BJ1-BJ4 fan out a pressure transducer, BJ5-BJ7 install a burden resistor, and BJ8-BJ15 configure analog inputs.

Which connectors are available on this drive?

The GE this drive features 3 34-pin connectors and 3 16-pin connectors, including JGQ, JHR, JGS/T, and JHS/T, for interfacing with TCQA and TCQC boards.

Can this drive be used in oil and gas applications?

The GE this drive is built for demanding environments and is suitable for turbine control systems in oil and gas operations. Contact PetroPartsOnline for parts suited to your application's requirements.

Frequently Asked Questions

What is the DS200TBQBG1ACB used for?

The GE DS200TBQBG1ACB is an RST Analog Termination Board in the Mark V Turbine Control System. It handles voltage, vibration, and pulse rate signals for turbine drive assemblies.

How many terminals does the DS200TBQBG1ACB have?

The GE DS200TBQBG1ACB has two terminal blocks with 77 terminals each, totaling 154 terminals for signal wire connections.

What is the function of the jumpers on the DS200TBQBG1ACB?

The GE DS200TBQBG1ACB includes 15 jumpers. BJ1-BJ4 fan out a pressure transducer, BJ5-BJ7 install a burden resistor, and BJ8-BJ15 configure analog inputs.

Which connectors are available on the DS200TBQBG1ACB?

The GE DS200TBQBG1ACB features 3 34-pin connectors and 3 16-pin connectors, including JGQ, JHR, JGS/T, and JHS/T, for interfacing with TCQA and TCQC boards.

Can the DS200TBQBG1ACB be used in oil and gas applications?

The GE DS200TBQBG1ACB is built for demanding environments and is suitable for turbine control systems in oil and gas operations. Contact PetroPartsOnline for parts suited to your application's requirements.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap