MR-J3-HC4S-SH-10M | Mitsubishi 10m Servo Power Cable

Introduction:
Mitsubishi MR-J3-HC4S-SH-10M is a 10 m shielded servo power cable with IP65 protection and high bending endurance for HC-UP and HC-LP 2kW motors.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The Mitsubishi MR-J3-HC4S-SH-10M is a Specialized cable for industrial control and automation applications.
The Mitsubishi MR-J3-HC4S-SH-10M is a specialized 10 m power cable for direct servo motor connection, supplied with a servo motor connector and bare-end flying leads. It is rated IP65 and carries shielding for noise-sensitive drive installations.
What makes this unit suitable for demanding motion applications?
This cable belongs to the MELSERVO MR-J3 product line and is built for the physical demands of servo axis wiring. Its high bending endurance supports continuous flexing in moving machine sections, while the included shielding helps contain electrical noise that can disturb feedback and command signals. The IP65 degree of protection guards the cable assembly against dust and water intrusion at the rated interface. Because the cable is a power cable for servo motor direct connection, it carries drive output power rather than encoder feedback. The combination of shielding, sealing and flex endurance makes the cable a dependable link between the drive cabinet and the motor.

Key specifications at a glance
- Manufacturer: Mitsubishi
- Product line: MELSERVO MR-J3
- Part number: this unit
- Product type: Cable
- Length: 10 m
- Connector type: Servo motor connector with bare-end flying leads
- Degree of protection: IP65
- Shielding: Shielding included
- Design: High bending endurance
- Cable type: Power cable for servo motor direct connection
- Compatibility: HC-UP and HC-LP series 2 kW motors and MR-J3 series drives
- Operating temperature: -10°C to 60°C
How does the 10 m length and connector arrangement affect installation?
The 10 m length gives layout planners room to route the cable from the drive enclosure to a motor mounted some distance away. One end terminates in a servo motor connector that mates with the motor housing, while the other end finishes in bare-end flying leads for landing on drive terminals. This arrangement removes the need for a separate motor-side connector kit and simplifies spare-parts stocking. During routing, keep bend radii within the limits that the high bending endurance design is intended to tolerate, and secure the cable so that flexing occurs along its length rather than at the connector. The IP65 rating applies to the cable assembly as supplied; protect the bare-end termination inside the cabinet from moisture and debris. For torque values and terminal assignments, refer to the official Mitsubishi documentation.
Where is this cable used in oil and gas machinery?
Servo-driven mechanisms appear throughout oil and gas operations, from valve actuation and metering skids to pipe handling and packaging lines. In these settings, this unit connects HC-UP and HC-LP series 2 kW motors to MR-J3 series drives. The shielded construction is relevant where adjustable-speed drives and other noise sources share an enclosure, because it helps preserve signal integrity on adjacent wiring. The -10°C to 60°C operating range covers many outdoor and semi-outdoor installations, although enclosures and cable trays should still be arranged to avoid temperature extremes. Where cable runs flex repeatedly, the high bending endurance design supports a longer service interval than a standard fixed-installation cable would allow. These cables are built for demanding environments, and selecting the correct length and connector style at the outset avoids field modifications.
Compatibility and integration notes
Confirm that the motor on hand is an HC-UP or HC-LP series 2 kW unit and that the drive belongs to the MR-J3 series before ordering. The cable is a power cable, so it does not carry encoder signals; a separate feedback cable is required for closed-loop operation. When routing power and feedback cables together, maintain physical separation where practical and cross at right angles to reduce coupling. The bare-end flying leads must be terminated according to the drive manual, and the motor connector should be seated fully to preserve the IP65 seal. Please verify current lifecycle status and availability with PetroPartsOnline before ordering.
Reliability and maintenance considerations
Inspect the cable periodically for jacket abrasion, connector seating and shield continuity. Flexing sections deserve the closest attention, since repeated bending is the most common cause of conductor fatigue. Keep the cable clear of sharp edges and hot surfaces, and avoid pulling on the connector body when disconnecting. Because the assembly is shielded and sealed, damage to the outer jacket should be addressed promptly to preserve both noise performance and ingress protection. Following these practices supports reliability you can depend on in mission-critical motion axes.
Frequently asked questions
What is this unit cable used for?
The Mitsubishi this unit is a 10 m power cable for direct servo motor connection, terminated with a servo motor connector and bare-end flying leads.
Which motors and drives does this cable connect?
The Mitsubishi this unit is compatible with HC-UP and HC-LP series 2 kW motors and MR-J3 series drives, according to the manufacturer's data.
What is the operating temperature range of this unit?
The Mitsubishi this unit operates within a temperature range of -10°C to 60°C.
Does the cable include shielding and ingress protection?
Yes. The Mitsubishi this unit includes shielding and carries an IP65 degree of protection.
Is this a power cable or a feedback cable?
The Mitsubishi this unit is a power cable for servo motor direct connection; encoder feedback requires a separate cable.
Contact PetroPartsOnline for parts suited to your application's requirements.
Frequently Asked Questions
What is the MR-J3-HC4S-SH-10M cable used for?
The Mitsubishi MR-J3-HC4S-SH-10M is a 10 m power cable for direct servo motor connection, terminated with a servo motor connector and bare-end flying leads.
Which motors and drives does this cable connect?
The Mitsubishi MR-J3-HC4S-SH-10M is compatible with HC-UP and HC-LP series 2 kW motors and MR-J3 series drives, according to the manufacturer's data.
What is the operating temperature range of the MR-J3-HC4S-SH-10M?
The Mitsubishi MR-J3-HC4S-SH-10M operates within a temperature range of -10°C to 60°C.
Does the cable include shielding and ingress protection?
Yes. The Mitsubishi MR-J3-HC4S-SH-10M includes shielding and carries an IP65 degree of protection.
Is this a power cable or a feedback cable?
The Mitsubishi MR-J3-HC4S-SH-10M is a power cable for servo motor direct connection; encoder feedback requires a separate cable.
{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "MR-J3-HC4S-SH-10M | Mitsubishi 10m Servo Power Cable", "mpn": "MR-J3-HC4S-SH-10M", "sku": "MR-J3-HC4S-SH-10M", "brand": {"@type": "Brand", "name": "Mitsubishi"}, "description": "The Mitsubishi MR-J3-HC4S-SH-10M is a Specialized cable for industrial control and automation applications. The Mitsubishi MR-J3-HC4S-SH-10M is a specialized 10 m power cable for direct servo motor connection, supplied with a servo motor connector and bare-end flying leads. It is rated IP65 and carries shielding for noise-sensitive drive installations. What makes this unit suitable for demanding motion applications? This cable belongs to the MELSERVO MR-J3 product line and is built for the physi", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1794198938-MR-J3-HC4S-SH-10M_1__fp96350bd5.jpg"], "category": "Cables & Accessories"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What is the MR-J3-HC4S-SH-10M cable used for?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi MR-J3-HC4S-SH-10M is a 10 m power cable for direct servo motor connection, terminated with a servo motor connector and bare-end flying leads."}}, {"@type": "Question", "name": "Which motors and drives does this cable connect?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi MR-J3-HC4S-SH-10M is compatible with HC-UP and HC-LP series 2 kW motors and MR-J3 series drives, according to the manufacturer's data."}}, {"@type": "Question", "name": "What is the operating temperature range of the MR-J3-HC4S-SH-10M?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi MR-J3-HC4S-SH-10M operates within a temperature range of -10°C to 60°C."}}, {"@type": "Question", "name": "Does the cable include shielding and ingress protection?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. The Mitsubishi MR-J3-HC4S-SH-10M includes shielding and carries an IP65 degree of protection."}}, {"@type": "Question", "name": "Is this a power cable or a feedback cable?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi MR-J3-HC4S-SH-10M is a power cable for servo motor direct connection; encoder feedback requires a separate cable."}}]}]}
