+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IC755ACC07GAS | GE Replacement Gasket for 7-inch Quickpanel+

Introduction:

The GE IC755ACC07GAS replacement gasket restores a secure, sealed mount for 7-inch Quickpanel+ terminals in demanding oil and gas control rooms.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IC755ACC07GAS
Type: Replacement gasket
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The GE IC755ACC07GAS replacement gasket is a field-replaceable sealing and mounting accessory for 7-inch Quickpanel+ operator interface terminals. It weighs 3.00 lbs (1.36 kg) and is specified for operation from 0 to 50 degrees Celsius.

Control rooms have evolved from relay panels and strip charts to compact operator interface terminals mounted directly on cabinet doors and machine frames. That evolution placed new demands on the humble gasket. Once a simple rubber strip, the gasket now seals the bezel, absorbs vibration, and helps hold the terminal square against its cutout. The GE this unit replacement gasket continues that role for the Quickpanel+ family, giving maintenance teams a direct way to renew the seal without replacing the terminal itself.

What does this unit gasket do for a Quickpanel+ terminal?

The gasket sits in the bezel channels on the sides of the device and forms the interface between the operator interface module and the mounting surface. Four mounting holes on the top and bottom of the unit accept the included mounting brackets, which secure the module to a panel or enclosure. Because the original gasket is pre-installed at the factory and wears with constant use, this accessory exists to replace it when the seal or fit degrades.

For oil and gas operations, that renewal matters. A gasket that no longer seats correctly can let dust and moisture reach the bezel area, and it can allow the terminal to shift under vibration. Replacing the gasket restores the intended mounting geometry and helps protect the mission-critical interface that operators rely on.

Figure 1: Front view of the GE IC755ACC07GAS Replacement gasket showing its physical design and enclosure.

Key features and technical specifications

  • Manufacturer: GE Fanuc Emerson
  • Product line: Quickpanel
  • Part number: this unit
  • Type: Gasket (replacement accessory)
  • Compatibility: 7-inch Quickpanel+ devices
  • Weight: 3.00 lbs (1.36 kg)
  • Mounting: Brackets included; mounting clamps torque range 0.3 N-m
  • Tools required: Phillips head screwdriver
  • Operating temperature: 0 to 50 degrees Celsius
  • Humidity: 85% RH (non-condensing) @ 30°C
  • Cooling method: Natural convection

The 0.3 N-m torque range is the specification to watch during installation. Over-tightening the mounting clamps can distort the gasket and defeat its sealing purpose, while under-tightening leaves the terminal loose. A Phillips head screwdriver is the only tool required, which keeps the replacement within reach of a standard maintenance kit.

Installation guidance for the replacement gasket

Begin by removing power from the Quickpanel+ device. The power supply must be disconnected before any work begins, and the device should be inserted without any cable connected to it, or it will not fit the gasket. Once power is off, verify that the replacement gasket sits fully in the bezel channels located on the sides of the device.

Secure the gasket using the included mounting brackets and clamps, tightening to the 0.3 N-m torque range. Because the terminal relies on natural convection for cooling, keep the surrounding enclosure clear of obstructions after reassembly. Finally, reconnect cables only after the module is seated and secured.

Figure 2: Technical layout and connection details for the GE IC755ACC07GAS Replacement gasket.

Maintenance and reliability in demanding environments

Gasket degradation is a wear process, not a sudden failure. To slow it, limit insertions and removals of the unit and retighten the mounting clips occasionally. In oil and gas facilities, where temperature swings and airborne hydrocarbons are routine, periodic inspection of the bezel seal is a sensible part of any maintenance round.

The gasket is rated for 0 to 50 degrees Celsius and 85% RH non-condensing at 30°C. Installations that stay within those limits reduce the rate at which the material ages. When the seal no longer seats correctly, replacing the gasket is a lower-cost intervention than replacing the entire operator interface terminal.

Compatibility and sourcing

This gasket is compatible with 7-inch Quickpanel+ devices. It is a replacement accessory, not a complete terminal, so confirm the terminal model before ordering. PetroPartsOnline supplies parts engineered for harsh oil and gas environments, and the team can help confirm that this gasket matches your Quickpanel+ configuration.

Contact PetroPartsOnline for parts suited to your application's requirements.

Frequently Asked Questions

What is the GE IC755ACC07GAS replacement gasket used for?

The GE IC755ACC07GAS is a replacement gasket for 7-inch Quickpanel+ operator interface devices. It seats in the bezel channels and, with the included mounting brackets, secures the terminal to a mounting surface.

What torque should be used when installing the IC755ACC07GAS gasket?

The GE IC755ACC07GAS mounting clamps are specified for a torque range of 0.3 N-m. A Phillips head screwdriver is the only tool required for installation.

What operating temperature does the IC755ACC07GAS support?

The GE IC755ACC07GAS is rated for 0 to 50 degrees Celsius and 85% RH non-condensing at 30°C. These limits apply to the Quickpanel+ series devices it serves.

How can I extend the life of the IC755ACC07GAS gasket?

Limit insertions and removals of the terminal and retighten the mounting clips occasionally. Inspect the bezel seal periodically, especially in facilities with temperature swings or airborne contaminants.

Does the IC755ACC07GAS ship with mounting hardware?

Yes. The GE IC755ACC07GAS includes mounting brackets. Contact PetroPartsOnline to confirm availability for your Quickpanel+ configuration.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap