FE6100CE | Flexem 10.1" 1024×600 Resistive HMI



Introduction:
The Flexem FE6100CE is a 10.1-inch resistive-touch IIoT HMI with a 1024×600 TFT LCD, built-in Ethernet, and DC 24V input for rugged plant-floor visualization.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
A panel builder integrating a skid-mounted compressor station faced a familiar problem: the legacy operator interface on the existing control cabinet was failing, and the replacement had to fit a fixed cutout while surviving washdown, vibration, and temperature swings. The Flexem FE6100CE addresses that scenario with a 10.1-inch 16:9 TFT LCD at 1024×600 resolution, a 4-wire industrial resistive touch panel, and a front protection rating of IP65 when flush-mounted. This IIoT HMI is built for demanding environments where the display is the operator's primary window into the process.
What makes this unit suited to oil and gas panel builds?
this unit combines a 600MHz ARM Cortex-A8 CPU with 128MB Flash and 128MB DDR3 memory, so screen updates and recipe handling stay responsive without external storage. A built-in real-time clock and a MicroSD (TF) card slot support local data logging and time-stamped events. The 400 cd/m² LED backlight is rated for 50,000 hours of LCD lifetime, which reduces the frequency of display replacement in hard-to-access cabinets. Viewing angles are 85° top, bottom, left, and right, so operators can read alarms from an angle without walking around the panel.

Key specifications at a glance
- Display: 10.1" 16:9 TFT LCD, 1024×600 resolution, 24-bit color.
- Touch panel: 4-wire industrial resistive touch screen.
- CPU: 600MHz ARM Cortex-A8.
- Memory: 128MB Flash + 128MB DDR3.
- Ethernet: 1×10/100M adaptive (RJ45).
- USB ports: USB Slave 2.0 ×1 (MicroUSB), USB Host 2.0 ×1 (Type A).
- Supply voltage: DC 24V (range DC 9 to 28 V).
- Power consumption: <10W maximum.
- Operating temperature: 0 to 50 °C.
- Protection rating: Front IP65 (with flush panel), rear IP20.
Frequently Asked Questions
What is the operating temperature range of the FE6100CE?
The Flexem FE6100CE operates from 0 to 50 °C, with a storage range of -20 to 60 °C and relative humidity of 10 to 90% RH non-condensing.
What supply voltage does the FE6100CE require?
The Flexem FE6100CE accepts DC 24V with an input range of DC 9 to 28 V and draws <10W maximum, with built-in lightning and surge protection.
Is the FE6100CE still available for new projects?
The Flexem FE6100CE is listed as legacy and replaced by the FE6400CE per the official upgrade notice dated 2024-01-31; contact PetroPartsOnline to confirm current availability for your application.
What are the panel cutout dimensions for the FE6100CE?
The Flexem FE6100CE requires a panel cutout of 260×202 mm (W×H) and achieves front IP65 protection with a flush panel mount.
Does the FE6100CE support IIoT connectivity?
The Flexem FE6100CE provides an expansion slot for FLink, FLink-2G-A, FLink-4G-A, or FLink-WiFi-A modules, along with built-in 10/100M Ethernet and USB ports.
How does the power design support mission-critical uptime?
Field power in oil and gas facilities is rarely clean. This unit accepts a DC 24V supply across a DC 9 to 28 V range, which gives margin for brownouts and long cable runs. Power consumption stays below 10W maximum, easing the load on existing 24V rails. Lightning and surge protection are built in, and the unit tolerates power interruption of <5ms maximum, so brief switching transients do not force a reboot. EMC performance is specified to EN61000-6-2:2005 and EN61000-6-4:2007, with surge immunity of ±1kV, EFT of ±2kV, and ESD contact 4kV / air 8kV. These ratings matter when the HMI shares a cabinet with contactors and variable-frequency drives.

Installation and panel fit
The panel cutout is 260×202 mm (W×H), and the enclosure measures 213×273×36 mm (H×W×D) in engineering plastic with a black bezel. At roughly 0.920 kg, the unit is light enough for one-person installation. Front IP65 protection is achieved with a flush panel mount, so gasket seating and cutout flatness deserve attention during fabrication. Rear IP20 means the back of the unit should stay inside an enclosure. The operating temperature range of 0 to 50 °C and relative humidity of 10 to 90% RH (non-condensing) set the cabinet ventilation requirements. Vibration endurance is specified at 10 to 25 Hz, 2G in X/Y/Z for 30 minutes, which covers the typical pump and compressor skid environment.
Communication and integration
Programming uses FStudio software, and programs can be downloaded over USB Slave, a U-disk, or Ethernet. The built-in 10/100M Ethernet port supports networked HMI architectures, while three serial ports are available: COM1 (RS232/RS485/RS422), COM2 (RS485), and COM3 (RS232). For IIoT data collection, the unit provides an expansion slot for FLink, FLink-2G-A, FLink-4G-A, or FLink-WiFi-A modules. Note that protocols are not published in the official datasheet, so confirm the required driver set with the supplier before specifying a network architecture. Integration Note: wiring into plant networks may require an external gateway or connection module; confirm cables and gateways with PetroPartsOnline during project planning.
Lifecycle status and sourcing
Per the official Flexem upgrade notice dated 2024-01-31, this unit is a legacy model replaced by the FE6400CE. No individual spec sheet is listed on the official download portal. For projects that already standardize on the FE6000 Series, PetroPartsOnline can confirm current availability and traceable replacement paths. Contact PetroPartsOnline for parts suited to your application's requirements.
