FE6070WE | Flexem 7" 1024×600 Resistive HMI



Introduction:
The FE6070WE is a 7-inch 16:9 resistive-touch HMI from Flexem's FE6000 series, featuring a 1024×600 display and built-in Ethernet for panel-mount operator interface.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
Flexem FE6070WE: A Field-Proven HMI for Demanding Oil & Gas Environments
The Flexem this unit is a 7-inch 16:9 widescreen resistive-touch IoT HMI from the FE6000 series, built around a 600 MHz ARM Cortex-A8 CPU and a 1024×600 high-resolution display. It is engineered for panel-mount installation in industrial cabinets, with a front IP65 rating that supports flush mounting in oil & gas control panels.
This operator interface terminal combines a bright 450 cd/m² LED-backlit LCD with a 4-wire industrial resistive touchscreen, making it suitable for gloved operation and wash-down areas when properly installed. The unit accepts a nominal DC 24 V supply with an operating range of DC 9–28 V, and its power consumption is specified at less than 10 W maximum.

Key Features and Technical Specifications
- Display: 7" 16:9 TFT LCD with 1024×600 resolution and 24-bit color depth.
- Brightness: 450 cd/m² typical, with 85° viewing angles on all sides.
- Touch panel: 4-wire industrial resistive touchscreen for reliable input.
- Processor: 600 MHz ARM Cortex-A8 CPU with 128 MB Flash and 128 MB DDR3 memory.
- Serial ports: COM1 (RS232/RS485/RS422), COM2 (RS485), COM3 (RS232).
- Ethernet: 1× 10/100M adaptive RJ45 port for programming and network integration.
- USB: 1× USB Slave 2.0 and 1× USB Host 2.0 for program download and peripherals.
- Expansion: MicroSD card slot and FLink module slot for optional 2G/4G/WiFi IoT modules.
- Power: DC 24 V nominal, operating range DC 9–28 V, <10 W maximum consumption.
- Environmental: Operating temperature 0 to 50 °C; storage -20 to 60 °C; 10–90 %RH non-condensing.
- Protection: Front IP65 (flush panel cabinet installation), rear IP20.
- Dimensions: 145×204×33.8 mm (H×W×D); panel cutout 192×138 mm (W×H).
One standout specification is the wide DC 9–28 V input range, which provides tolerance for voltage fluctuations common in remote oil & gas sites where supply stability can vary. Additionally, the built-in lightning surge protection and EMC compliance to EN61000-6-2:2005 and EN61000-6-4:2007 help ensure dependable operation in electrically noisy environments.
What Are the Common Failure Modes and How Can You Mitigate Them?
Although this unit is built for demanding environments, understanding potential failure points helps maintenance teams extend service life. The LCD backlight is rated for 50,000 hours, after which brightness may gradually decline; planning replacement before critical readability is affected is advisable. The resistive touchscreen can wear with heavy use, so periodic inspection of the touch surface for scratches or dead spots is recommended. Because the unit is panel-mounted with a front IP65 seal, the gasket should be checked during routine maintenance to prevent moisture ingress. Operating the HMI outside the specified 0 to 50 °C range or in high-UV environments (e.g., direct sunlight) is prohibited and can accelerate component degradation. Finally, ensure the DC 24 V supply remains within the DC 9–28 V range and is free from excessive transients; the built-in surge protection provides a margin, but external surges beyond the specified ±1 kV lightning surge level may still cause damage.

How Does this unit Integrate with Existing Control Systems?
this unit offers multiple communication interfaces for integration into oil & gas control architectures. Three serial ports (COM1: RS232/RS485/RS422; COM2: RS485; COM3: RS232) allow connection to legacy PLCs, flow computers, and other serial devices. The 10/100M Ethernet port supports program downloads and network connectivity, while USB host and slave ports simplify project updates via USB flash drive or direct PC connection. For IoT-enabled applications, the FLink module slot accepts optional 2G/4G/WiFi modules, enabling remote monitoring and data logging. Note that specific protocols are not published in the official datasheet; consult Flexem documentation or contact PetroPartsOnline for protocol details. When integrating into fieldbus networks, an external gateway or connection module may be required; confirm cable and gateway compatibility with the supplier.
Installation and Commissioning Guidance
this unit is designed for panel mounting with a cutout of 192×138 mm (W×H). Ensure the panel thickness and gasket seating provide a proper seal to maintain the front IP65 rating. The rear of the unit is rated IP20, so it must be installed inside a cabinet that protects against dust and moisture. Wiring should follow local electrical codes; the power supply must be a DC 24 V nominal source capable of delivering at least the maximum consumption of 10 W. For program downloads, connect via USB slave, USB flash drive, or Ethernet using Flexem's FStudio software. The built-in real-time clock requires no external battery for basic timekeeping, but verify long-term accuracy in your environment.
Frequently Asked Questions
What is the operating temperature range of the FE6070WE?
The Flexem FE6070WE operates within 0 to 50 °C and can be stored from -20 to 60 °C. It is designed for indoor panel-mount use and should not be exposed to direct sunlight or high-UV environments.
What input voltage does the FE6070WE require?
The Flexem FE6070WE requires a nominal DC 24 V supply and accepts an operating range of DC 9–28 V. Power consumption is less than 10 W maximum, and the unit includes lightning surge protection.
How do I program the FE6070WE?
Programming the Flexem FE6070WE is done using Flexem's FStudio software. Program downloads can be performed via USB slave, USB flash drive, or Ethernet connection.
Is the FE6070WE still available?
The Flexem FE6070WE is listed as legacy/superseded with the FE6370WE as successor per official notice 2024-01. Please verify current lifecycle status and availability with PetroPartsOnline before ordering.
What are the communication options on the FE6070WE?
The Flexem FE6070WE includes three serial ports (COM1: RS232/RS485/RS422; COM2: RS485; COM3: RS232), one 10/100M Ethernet port, and USB host/slave ports. Specific protocols are not published in the official datasheet.
Why Choose this unit for Oil & Gas Applications?
With its rugged construction, wide operating temperature range, and robust EMC performance, this unit is built for demanding environments. The 7-inch widescreen with 1024×600 resolution provides clear visibility of process data, while the resistive touchscreen supports operation with gloves—a common requirement in field environments. The wide DC 9–28 V input range and lightning surge protection add reliability in remote locations. For projects requiring a dependable operator interface, this unit delivers reliability you can depend on.
Lifecycle note: According to official notice 2024-01, this unit is legacy/superseded, with the FE6370WE as successor. Please verify current lifecycle status and availability with PetroPartsOnline before ordering.
Contact PetroPartsOnline for parts suited to your application's requirements.
