+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

FE3370W | Flexem 7" 1024×600 Resistive HMI

Introduction:

The Flexem FE3370W is a 7-inch 1024×600 resistive-touch HMI with three serial ports, USB download, and a wide DC 9–28 V input for oil and gas control panels.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: Flexem
Part Number: FE3370W
Type: Hmi
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

Flexem FE3370W is a 7-inch 16:9 widescreen resistive-touch HMI from the FE3300 series, built around a 1024×600 TFT LCD and a 1 GHz dual-core Cortex-A7 processor. For oil and gas operators, its most practical electrical trait is a DC 9–28 V operating range around a nominal DC 24 V supply, which tolerates the voltage sag common on field control panels.

Why this unit Suits Demanding Control Rooms

Panel builders in oil and gas need an operator terminal that starts reliably, survives brownouts, and keeps serial field devices connected. This unit addresses those needs through a rugged electrical design and a resistive touchscreen that works with gloved hands. Its front rating of IP65 supports flush panel cabinet installation, while the rear IP20 rating suits the inside of an enclosure.

Power interruption tolerance is specified at less than 5 ms, so brief supply dips do not reset the terminal. The supply input accepts DC 9–28 V, and maximum power consumption stays below 10 W. Those figures matter where panel power budgets are tight and where 24 V rails are shared with solenoids and relays.

Figure 1: Front view of the Flexem FE3370W Hmi showing its physical design and enclosure.

Key Specifications at a Glance

  • Display: 7" 16:9 TFT LCD, 1024×600 resolution, 24-bit color.
  • Brightness: 250 cd/m² typical with LED backlight.
  • Touch panel: 4-wire industrial resistive touchscreen.
  • Processor: 1 GHz dual-core Cortex-A7 with 128 MB Flash and 128 MB DDR3.
  • Serial ports: COM1 (RS232/RS485/RS422), COM2 (RS485), COM3 (RS232).
  • USB: 1× Type-C OTG and 1× USB Type A for program download.
  • Supply voltage: DC 24 V nominal, operating range DC 9–28 V.
  • Power consumption: <10 W maximum.
  • Operating temperature: 0 to 50 °C.
  • Protection: Front IP65, rear IP20.

How the Display and Touch Perform in the Field

The 1024×600 resolution on a 7-inch screen gives operators room for trend windows and alarm banners without crowding. A 250 cd/m² typical brightness suits indoor control rooms and shaded panel fronts. Viewing angles are specified at 50° top, 70° bottom, 70° left, and 70° right, so the screen remains legible when an operator stands slightly off-axis.

Because the touch panel is a 4-wire industrial resistive type, it responds to pressure rather than capacitance. That makes it dependable for technicians wearing work gloves. The LED backlight is rated for an LCD lifetime of 50,000 hours, which supports long service intervals in mission-critical panels.

Figure 2: Technical layout and connection details for the Flexem FE3370W Hmi.

Communication and Programming

Three built-in serial ports cover mixed-protocol cabinets: COM1 offers RS232, RS485, or RS422; COM2 provides RS485; and COM3 provides RS232. Program download runs over USB slave or a USB flash drive. This unit has no Ethernet port, no SD card slot, and no Bluetooth support, so serial and USB are the available data paths.

Official datasheet protocols are not published, so confirm the protocol set for your devices before design freeze. Projects that need network integration should plan for an external gateway or conversion module and verify cable and gateway compatibility with the supplier.

Power and Environmental Limits

The supply input is DC 24 V nominal with an operating range of DC 9–28 V. Maximum power consumption is below 10 W, and the unit tolerates power interruptions shorter than 5 ms. Lightning surge protection is built in, and EMC performance is stated to EN61000-6-2:2019 and EN61000-6-4:2019, with RoHS compliance.

Operating temperature is 0 to 50 °C, while storage temperature spans -20 to 60 °C. Relative humidity must stay between 10 and 90 %RH, non-condensing. Vibration endurance covers 10–25 Hz in X, Y, and Z directions at 2G for 30 minutes. Operating in a high-UV environment is prohibited, so mount the panel away from direct sunlight.

Installation and Panel Fit

this unit is a panel-mount terminal with an engineering plastic enclosure in light gray. Dimensions are 145×204×34 mm, and the panel cutout measures 190×136 mm. The front reaches IP65 only when installed in a flush panel cabinet; the rear remains IP20 and must stay inside the enclosure. Weight is approximately 0.476 kg.

Before cutting a panel, verify the cutout drawing against the enclosure dimensions. Then confirm that the 24 V supply stays within DC 9–28 V under load, and route serial cables away from high-current conductors to reduce noise coupling.

Where This HMI Fits

Typical duties include wellhead control panels, compressor station interfaces, and pipeline monitoring stations where serial instruments dominate. The resistive touch and wide input voltage range also suit skid-mounted packages that see voltage variation during startup. For applications requiring Ethernet or SD storage, specify a different model in the FE3300 series.

Frequently Asked Questions

What supply voltage does this unit require?

The Flexem this unit uses a DC 24 V nominal supply with an operating range of DC 9–28 V. Maximum power consumption is below 10 W, and power interruption tolerance is under 5 ms.

Does this unit include an Ethernet port?

No. The Flexem this unit provides serial communication through COM1, COM2, and COM3, plus USB Type-C OTG and USB Type A ports. Ethernet is not available on this model.

What is the operating temperature range of this unit?

The Flexem this unit operates from 0 to 50 °C and stores from -20 to 60 °C. Relative humidity must remain between 10 and 90 %RH, non-condensing.

Can this unit be used outdoors?

The Flexem this unit carries a front IP65 rating for flush panel cabinet installation, but operating in a high-UV environment is prohibited. Outdoor use therefore requires a shaded or protected enclosure.

What software programs this unit?

The Flexem this unit is programmed with FStudio software. Program download is supported over USB slave or a USB flash drive.

Contact PetroPartsOnline for parts suited to your application's requirements.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap