F5-BSC01 | Flexem RS485/232 Expansion Board Control PLC




Introduction:
The Flexem F5-BSC01 expansion board adds an isolated RS485/RS232 serial channel to compatible PLC CPUs, drawing power internally from the host unit.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The Flexem F5-BSC01 is a Expansion Board Control PLC for industrial control and automation applications.
The Flexem F5-BSC01 is a serial ports expansion board for Flexem control PLC systems, adding one RS485/RS232 channel with a configurable baud rate from 4800 to 115200 bps. It installs in the CPU front expansion board slot and draws its 5 VDC power internally from the main unit, so no external supply is required.
What does this controller expansion board add to a PLC system?
This module extends a compatible Flexem CPU with a single serial communication channel. The port supports both RS485 and RS232 signaling, giving field engineers a straightforward way to connect serial devices to the control platform. Because the board is non-isolated, it suits panel installations where the serial device shares a common reference with the PLC. The non-removable terminal block keeps wiring fixed once landed, which reduces the chance of loose connections in vibrating plant environments.

Key specifications at a glance
- Channel count: 1 serial channel
- Isolation: Non-isolation
- Ports: RS485/RS232
- Protocol: RS485/232, baud rate 4800–115200 bps
- Power supply: 5 VDC -15%/+20%, 3.2 W max; provided internally by the main unit without external input
- Wiring structure: Non-removable terminal block
- Operating temperature: -10 to 60 °C
- Storage temperature: -20 to 70 °C
- Environment humidity: 10–90% RH, non-condensing
- Installation: CPU front expansion board slot
How does the module handle power and temperature in the field?
Power for this controller comes from the host CPU through the expansion slot, so the board needs no separate 5 VDC feed. The stated tolerance of -15%/+20% on the 5 VDC rail and a maximum draw of 3.2 W tell engineers what headroom the host supply must carry. In hot process areas, the -10 to 60 °C operating range defines where the board can be mounted without derating. For cold-climate sites, the -20 to 70 °C storage range covers transport and shutdown conditions. Humidity is specified at 10–90% RH non-condensing, so enclosure climate control should keep condensation away from the terminal block.

Where is this serial expansion board used?
Oil and gas control panels often need an extra serial port for meters, drives or legacy devices. This controller fits that role by adding one RS485/RS232 channel to the CPU. Because the board is non-isolated, it is best applied where the connected device shares a ground reference with the PLC. In skid-mounted packages, the compact board installs directly in the CPU front slot, which keeps panel depth unchanged. The non-removable terminal block also simplifies field wiring checks during commissioning. For mission-critical loops, engineers should confirm that a single serial channel meets the device count before specifying the board.
Installation and wiring notes
Mounting is limited to the CPU front expansion board slot, so the board should be fitted with the CPU powered down and the panel isolated. The terminal block is non-removable, meaning conductors land directly on the board rather than on a pluggable connector. During wiring, keep serial cables separated from high-voltage runs to limit noise pickup on the non-isolated port. After installation, set the baud rate within the 4800–115200 bps range to match the connected device. Finally, verify that the host CPU supply can deliver the board's 3.2 W maximum draw alongside existing loads.
Reliability and maintenance in demanding environments
this controller is built for demanding environments where panel space and power budgets are tight. Its internal power arrangement removes a common failure point: the external supply connection. Periodic inspection should focus on terminal block tightness and on signs of humidity ingress, since the board is rated for non-condensing conditions only. In high-temperature areas, confirm that ambient at the CPU slot stays within the -10 to 60 °C operating range. Because the serial port is non-isolated, maintenance teams should also check for ground potential differences between the PLC and connected devices. These checks support reliability you can depend on across long service intervals.
Integration with existing control architectures
The board speaks RS485/232 at baud rates from 4800 to 115200 bps, which covers most serial field devices used in oil and gas panels. It does not add a fieldbus protocol of its own; it simply provides a serial channel managed by the host CPU. Where a project requires a specific network, confirm gateway or converter needs with the supplier before ordering. PetroPartsOnline can advise on parts suited to your application's requirements, including whether this single-channel board matches the device count and wiring plan.
Frequently asked questions
What is this controller?
The Flexem this controller is a serial ports expansion board for Flexem control PLC systems. It provides one RS485/RS232 channel and installs in the CPU front expansion board slot.
Does this controller need an external power supply?
No. The Flexem this controller is powered internally by the main unit at 5 VDC -15%/+20%, with a maximum draw of 3.2 W, so no external input is required.
What baud rates does this controller support?
The Flexem this controller supports RS485/232 communication at baud rates from 4800 to 115200 bps, set to match the connected serial device.
Is this controller isolated?
The Flexem this controller is a non-isolated expansion board. It is suited to installations where the connected serial device shares a common reference with the PLC.
What is the operating temperature range of this controller?
The Flexem this controller operates from -10 to 60 °C and can be stored from -20 to 70 °C. Humidity is rated at 10–90% RH non-condensing.
Contact PetroPartsOnline for parts suited to your application's requirements.
Frequently Asked Questions
What is the F5-BSC01?
The Flexem F5-BSC01 is a serial ports expansion board for Flexem control PLC systems. It provides one RS485/RS232 channel and installs in the CPU front expansion board slot.
Does the F5-BSC01 need an external power supply?
No. The Flexem F5-BSC01 is powered internally by the main unit at 5 VDC -15%/+20%, with a maximum draw of 3.2 W, so no external input is required.
What baud rates does the F5-BSC01 support?
The Flexem F5-BSC01 supports RS485/232 communication at baud rates from 4800 to 115200 bps, set to match the connected serial device.
Is the F5-BSC01 isolated?
The Flexem F5-BSC01 is a non-isolated expansion board. It is suited to installations where the connected serial device shares a common reference with the PLC.
What is the operating temperature range of the F5-BSC01?
The Flexem F5-BSC01 operates from -10 to 60 °C and can be stored from -20 to 70 °C. Humidity is rated at 10–90% RH non-condensing.
