25C-D017N114 | Allen-Bradley 7.5 kW EtherNet/IP Drive



Introduction:
The Allen-Bradley 25C-D017N114 is a 7.5 kW PowerFlex 527 AC drive with dual EtherNet/IP ports, STO safety, and 380…480V AC input for rugged industrial use.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The Allen-Bradley 25C-D017N114 is a AC adjustable-frequency drive — PowerFlex 527 for industrial control and automation applications.
How can a single drive simplify both motion control and safety on a critical pump or compressor skid? The Allen-Bradley 25C-D017N114 answers that question as a PowerFlex 527 AC adjustable-frequency drive rated 7.5 kW (10 HP) at 17 A, with dual embedded EtherNet/IP ports and integrated Safe Torque Off. Built for demanding environments, this Frame C drive combines a 380…480V AC three-phase input with an integral EMC filter and a standard interface module featuring keypad, potentiometer, and LED display.
Why this drive Suits Mission-Critical Oil and Gas Skids
Oil and gas operators need dependable motor control that tolerates voltage sag, vibration, and temperature swings. This drive is field-proven in that role because its electrical and environmental ratings are published for industrial conditions. The input voltage tolerance of -15 % / +10 % and input frequency range of 47…63 Hz help it ride through typical supply variations. Meanwhile, 100 ms power ride-through and 0.5 s minimum logic control ride-through keep control alive during short interruptions.
For safety-critical stops, the hardwired STO input is TÜV Rheinland approved up to Performance Level e (PLe), Category 3 per EN ISO 13849 and SIL CL 3 per IEC 61508, EN 61800-5-2 and EN 62061. The STO response time is less than 12 ms, so protective functions act quickly without relying on external contactors.

Key Specifications and Operating Envelope
- Input voltage: 380…480V AC, 3-phase, with -15 % / +10 % tolerance.
- Input frequency: 47…63 Hz.
- Output current: 17 A maximum at rated output voltage.
- Normal duty: 7.5 kW (10 HP); heavy duty: 7.5 kW (10 HP).
- Operating temperature: -20…+50 °C without derating in vertical IP20 mounting; up to +60 °C derated, and up to +70 °C derated with the 25-FANx-70C control module fan kit.
- Storage temperature: -40…+85 °C (-40…+185 °F).
- Relative humidity: 0…95 % non-condensing.
- Efficiency: 97.5 % (typical).
- Enclosure: IP20 NEMA/Open Type, panel mount; Frame C dimensions 220.0 H × 109.0 W × 184.0 D mm.
- Weight: 2.3 kg (Frame C).
The drive also provides four programmable 24V DC digital inputs, two isolated analog inputs, two relay outputs, two opto outputs, and one non-isolated analog output. Control methods include Basic Volts/Hertz, Fan/Pump Volts/Hertz, sensorless vector control, and SVC Economizer. For closed-loop position or velocity control, the 25-ENC-2 encoder option board adds incremental feedback.
How Does the Drive Integrate with EtherNet/IP Networks?
Two embedded EtherNet/IP ports connect this drive directly to linear, star, or Device Level Ring (DLR) topologies. The CIP Safety protocol allows safety data and standard control data plus diagnostics to travel over the same network. Integrated motion commands from a Logix-based controller are supported; a ControlLogix controller requires a 1756-EN2T, 1756-EN2TR, or 1756-EN3TR EtherNet/IP module, while a CompactLogix 5370 controller has dual embedded EtherNet/IP ports.
Because the drive has no RS-485 DSI port, serial accessories such as the 22-SCM-232 converter and 22-RJ45CBL-C20 cable do not apply. For network setup, the 1203-USB converter module is listed for the 520 series. When wiring into an EtherNet/IP network, confirm cables and any gateway requirements with the supplier.

Installation and Environmental Considerations
Mount the drive vertically in a pollution degree 1 or 2 environment to maintain CE Low Voltage Directive compliance. The drive produces leakage current exceeding 3.5 mA AC and/or 10 mA DC, so the earthing conductor must meet local regulations for high protective-earthing-current equipment. Altitude is rated to 1000 m (3300 ft) without derating, and up to 4000 m (13 200 ft) with derating. The ambient atmosphere must not contain volatile or corrosive gases, vapors, or dust. For IP30 / NEMA 1 / UL Type 1 protection, the 25-JBAx option kit is required.
This drive is not intended for public low-voltage networks supplying domestic premises without additional mitigation. The installer is responsible for supplementary line filtering and enclosure measures, and for verifying distribution network operator requirements.
Reliability and Maintenance for Demanding Environments
Rugged design starts with protection features. Electronic motor overload protection provides class 10 protection per NEC article 430 and UL 508C File 29572. Overcurrent limits are 200 % hardware and 300 % instantaneous fault. Ground fault and short-circuit trips protect the output. The integral EMC filter and conformal coating to IEC 60721-3-3 level 3C2 (chemical and gases only) support dependable operation in harsh settings.
Inspect the fan and heatsink periodically, and verify terminal torque during scheduled shutdowns. Keep the enclosure free of dust and corrosive vapors. These simple steps help preserve reliability you can depend on.
Frequently Asked Questions
What is the operating temperature range of this drive?
The Allen-Bradley this drive operates from -20…+50 °C without derating in vertical IP20 mounting. Derated operation extends to +60 °C, and up to +70 °C with the 25-FANx-70C control module fan kit.
What input voltage does this drive accept?
The Allen-Bradley this drive accepts 380…480V AC, 3-phase input with -15 % / +10 % tolerance and 47…63 Hz input frequency.
Does this drive include Safe Torque Off?
Yes, the Allen-Bradley this drive includes a hardwired STO input approved up to PLe, Category 3 and SIL CL 3, with a response time of less than 12 ms.
What is the power rating of this drive?
The Allen-Bradley this drive is rated 7.5 kW (10 HP) in both normal duty and heavy duty, with 17 A continuous output current.
Contact PetroPartsOnline for parts suited to your application's requirements.
