IC694ALG221 | GE 4-Channel Analog Input Module RX3i



Introduction:
The IC694ALG221 is a GE RX3i analog input module with four current channels, factory calibration, and 0.1% accuracy for mission-critical oil and gas control.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
What Is the GE IC694ALG221 Analog Input Module?
The GE this controller is a four-channel analog input module for the PACSystem RX3i programmable automation controller. It accepts 0-20 mA and 4-20 mA current signals with 12-bit resolution and 0.1% full-scale accuracy, making it a dependable choice for closed-loop monitoring in rugged oil and gas environments.
This module is part of the RX3i series originally manufactured by GE Intelligent Platforms and now under Emerson Automation. It interfaces transmitters, signal splitters, isolators, and converters to the host controller, converting analog measurements into digital data for user logic. Each channel updates every 2 ms, so control loops receive fresh process values quickly.

Key Features and Technical Specifications
- Input channels: Four analog inputs, individually configurable for current signals.
- Input signal ranges: 0-20 mA and 4-20 mA, selected via range jumpers.
- Resolution: 4 µA at 4-20 mA; 5 µA at 0-20 mA.
- Accuracy: 0.1% full scale plus 0.1% reading.
- Channel update rate: 2 ms for all four channels.
- Input filter response: 325 Hz.
- Common mode voltage: 200 V.
- Power consumption: 25 mA at 5 VDC from backplane; 100 mA at 24 VDC isolated.
- Isolation: Field-to-backplane optical isolation; 250 VAC continuous, 1500 VAC for 1 minute to frame ground.
- Connector: 20-screw terminal block, included with module.
The factory calibration to 4 µA per count eliminates on-site trimming for most applications. Linearity is better than 1 least significant bit, so readings stay consistent across the operating range. A single green Module OK LED confirms power is applied.
How Does this controller Perform in Oil and Gas Applications?
Oil and gas operations demand reliable signal acquisition from pressure, flow, and level transmitters. This controller handles these tasks with 0.1% accuracy and a 2 ms update rate, supporting closed-loop control of analog systems. Its 200 V common mode voltage tolerance helps reject ground noise in electrically noisy field environments.
Typical uses include interfacing 4-20 mA transmitters on wellheads, pipeline monitoring skids, and separator control loops. The module also suits signal splitters and isolators that feed data to the RX3i controller. Because it is a component of the PACSystem RX3i, it integrates directly with all RX3i CPUs.

What Are the Power and Environmental Considerations?
The module draws 25 mA from the +5 VDC backplane bus and 100 mA from an isolated +24 VDC supply. Plan your power budget accordingly, especially when multiple analog modules share the same rack. The isolated 24 VDC input supports field wiring without additional supply conditioning.
Operating temperature is not specified in the available data; refer to the official Emerson datasheet for the full environmental range. The module is factory calibrated, so no periodic calibration is required under normal conditions. However, in harsh oil and gas environments, periodic inspection of terminal connections is recommended to maintain signal integrity.
Installation and Integration Notes
Install this controller in any RX3i backplane slot that supports analog modules. The 20-screw terminal block accepts field wiring for current loops. Use twisted-pair cable for 4-20 mA signals to reduce noise pickup, and route wiring away from high-voltage conductors.
Range jumpers for channels 1-2 and 3-4 select between 0-20 mA and 4-20 mA. Set these jumpers before applying power. The module is not hot-swappable; remove power from the backplane before inserting or removing the module to avoid component damage or injury.
For integration with fieldbus networks, note that the RX3i CPU handles communication; this controller does not have a direct network interface. Confirm gateway and cabling requirements with your supplier when connecting to plant networks.
Frequently Asked Questions
What input signals does this controller accept?
The GE this controller accepts 0-20 mA and 4-20 mA current signals on four individually configurable channels, with resolution of 5 µA/bit and 4 µA/bit respectively.
Is this controller hot-swappable?
No. This controller is not hot-swappable. Remove power from the backplane before inserting or removing the module to prevent damage or injury.
What is the power consumption of this controller?
The GE this controller draws 25 mA at 5 VDC from the backplane and 100 mA at 24 VDC from the isolated supply.
Can I use this controller with any RX3i CPU?
Yes, this controller is compatible with all RX3i PACSystem CPUs. It is a standard analog input module for the RX3i platform.
How accurate are the analog readings?
The GE this controller provides 0.1% full-scale accuracy plus 0.1% reading, with linearity better than 1 least significant bit and factory calibration to 4 µA per count.
Buying this controller for Your Operation
When evaluating this controller for your application, consider channel count, signal range, accuracy, and update rate. The four channels and 2 ms update suit small to medium analog loops. For larger systems, multiple modules can be added to the same backplane.
PetroPartsOnline supplies this controller as a PLC spare part for critical operations. Contact PetroPartsOnline for parts suited to your application's requirements. Verify current lifecycle status and availability with PetroPartsOnline before ordering.
