+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

IC200MDL330 | GE 16-Point 120 VAC Discrete Output Module

Introduction:

The IC200MDL330 is a GE VersaMax 16-point discrete output module with individually isolated 120 VAC outputs, 0.5 A per point, and 140 mA backplane draw.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: IC200MDL330
Type: Discrete output module
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

What Is the GE IC200MDL330 Discrete Output Module?

The GE this module is a 16-point discrete output module from the VersaMax I/O series, originally produced by GE Intelligent Platforms and now under Emerson Automation. It delivers a nominal 120 VAC output signal with a range of 0-132 VAC at 47-63 Hz, and each point handles up to 0.5 A. This module is built for demanding environments where dependable discrete control is mission-critical.

Engineers specify this module when a VersaMax CPU or network interface needs to drive two-state field devices such as interposing relays, contactors, and indicator lamps. Because every channel is individually isolated, a fault on one output does not cascade to the others, which supports reliable operation in rugged oil and gas installations.

Figure 1: Front view of the GE IC200MDL330 Discrete output module showing its physical design and enclosure.

Key Features and Technical Specifications

  • Output channels: Sixteen (16) discrete outputs, individually isolated.
  • Output signal, nominal: 120 VAC.
  • Output signal, range: 0-132 VAC.
  • Frequency: 47-63 Hz.
  • Output current: 0.5 A per point maximum; 10 mA minimum load.
  • Backplane current: 140 mA maximum drawn from BIU power supply.
  • Isolation: 250 VAC continuous; 1500 VAC for 1 minute (user to logic and frame ground; group to group).
  • Response time: 1/2 cycle maximum (On/Off).
  • Protection: Snubber and MOV for each output.
  • Indicators: 16 individually numbered LEDs and 1 backplane LED.
  • Dimensions: Approximately 110 x 66.8 x 50.0 millimeters.
  • Voltage drop: 2.0 V maximum.
  • Leakage current: Less than 2 mA maximum at 132 VAC.

The combination of optical isolation and per-point MOV protection makes this module a field-proven choice for switching inductive loads in harsh environments. The 1500 VAC isolation rating for one minute provides a rugged barrier between field wiring and backplane logic.

How Does this module Compare with Other VersaMax Output Modules?

When selecting a discrete output module for a VersaMax system, engineers often compare AC and DC output types. This module is an AC output module rated for 120 VAC nominal, which suits applications where 120 VAC control power is already available. In contrast, DC output modules in the VersaMax family typically switch lower DC voltages. The bullet-point comparison below highlights the key differences to consider:

  • Output type: this module provides AC outputs; DC modules provide DC outputs.
  • Nominal voltage: This module is rated 120 VAC; DC modules are rated for DC voltages.
  • Isolation: this module offers individually isolated channels; some DC modules may use grouped isolation.
  • Protection: This module includes snubber and MOV per output; DC modules may use different transient suppression.
  • Load compatibility: AC outputs suit relays, contactors, and lamps; DC outputs suit solenoids and DC relays.

Because this module is designed for 120 VAC field devices, it is often chosen for legacy control panels and oilfield skids where AC control power is standard. For new designs with DC devices, a DC output module would be more appropriate. Always confirm the load voltage and current against the module ratings.

Figure 2: Technical layout and connection details for the GE IC200MDL330 Discrete output module.

Installation and Setup in VersaMax Systems

this module requires a VersaMax I/O carrier base, such as the IC200CHSxxx series, which uses a snap-in design to reduce field wiring complexity. It draws 140 mA maximum from the backplane power supply, so verify the BIU power budget before adding modules. An external user-supplied 120 VAC power supply is required for the output circuits; the module does not include a built-in power source. Wire the outputs to interposing relays, contactors, or lamps according to the terminal assignments on the carrier base. Because the outputs are individually isolated, each channel can be wired independently, which simplifies troubleshooting and maintenance. For integration with fieldbus networks, note that wiring into such networks may require an external gateway or connection module; confirm cables and gateways with the supplier.

Maintenance and Reliability in Oil and Gas Environments

In mission-critical oil and gas operations, discrete output modules must endure temperature swings, vibration, and electrical noise. This module is built for demanding environments, with per-point MOVs and snubbers that help absorb transient voltages from inductive loads. Routine maintenance should include periodic inspection of terminal connections and verification that the 16 channel LEDs and backplane LED indicate expected states. Because the module uses optical isolation rated to 1500 VAC for one minute, it provides a dependable barrier against field transients. However, always follow the manufacturer's safety manual when servicing energized equipment. Reliability you can depend on starts with proper installation and regular checks.

Frequently Asked Questions

What is the output voltage range of the GE this module?

The GE this module provides a nominal output of 120 VAC with an output signal range of 0-132 VAC at 47-63 Hz.

How many output channels does this module have?

this module has sixteen discrete output channels, each individually isolated from the others.

What is the maximum output current per point on this module?

Each output point on this module can handle a maximum of 0.5 A and a minimum load of 10 mA.

Does this module require an external power supply?

Yes, this module requires an external user-supplied 120 VAC power supply for operation; it does not have a built-in power source.

What isolation does this module provide?

this module offers 250 VAC continuous isolation and 1500 VAC for one minute between user input and logic, and between groups.

Contact PetroPartsOnline for parts suited to your application's requirements.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap