+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

FPad710 | Flexem 10.1" 4-wire Touch Panel HMI

Introduction:

The Flexem FPad710 is a 10.1-inch industrial HMI with a 4-wire resistive touch screen, dual gigabit Ethernet, and a DC 18V~28V input range for rugged plant-floor use.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: Flexem
Part Number: FPad710
Type: Touch Panel 4-wire industrial resistance touch screen
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The Flexem FPad710 is a 10.1-inch industrial HMI built around a 4-wire industrial resistance touch screen and a 1280x800 TFT LCD. It runs Linux on a 4-core 64-bit Cortex-A55 CPU at 2.0 GHz and accepts a DC24V input across a DC 18V~28V working range, making it a dependable choice for mission-critical operator interfaces in oil and gas environments.

Why this unit Suits Demanding Control Rooms

Field engineers often ask whether a panel PC can survive cabinet heat, vibration, and unstable supply rails. This unit answers with a -10~60˚C operating temperature, 10~25Hz vibration endurance in all three axes, and an isolated power adapter with lightning surge protection. Its power interruption tolerance of less than 5mS helps the unit ride through brief supply dips without a restart. Because the front face carries IP65 protection with a NEMA panel and the rear is IP20, the unit suits flush-mounted enclosure doors where washdown and dust exposure are limited to the front.

Brightness reaches 400 cd/m² with LED backlighting and a 50000-hour LCD lifetime. Viewing angles of 85 degrees on all four sides keep the screen readable from off-axis positions, which matters when operators stand beside a skid rather than directly in front of it.

Figure 1: Front view of the Flexem FPad710 Touch Panel 4-wire industrial resistance touch screen showing its physical design and enclosure.

Key Specifications at a Glance

  • Display: 10.1-inch 16:10 TFT LCD at 1280x800 resolution with 24-bit color.
  • Touch Panel: 4-wire industrial resistance touch screen for gloved or stylus operation.
  • Processor: 4-core 64-bit Cortex-A55 at 2.0 GHz with Mali G52 GPU.
  • Memory: 16GB EMMC storage plus 2GB DDR4.
  • Operating Temperature: -10~60˚C, with storage from -20~70˚C.
  • Input Voltage: DC24V rated, working range DC 18V~28V.
  • Rated Power: Less than 10W, with natural cooling.
  • Ethernet: Two gigabit Ethernet ports rated 10/100/1000M.
  • Serial Ports: COM1 RS232/RS485/RS422; COM2 RS485/RS422; COM3 RS232.
  • Protection: Front IP65 with NEMA panel, back IP20.

The combination of a 4-wire resistive touch layer and a 400 cd/m² panel is a practical match for oil and gas control rooms where operators may wear gloves and ambient light varies through the day. The isolated power adapter with lightning surge protection is especially relevant on remote well pads, where supply transients are a common cause of premature electronics failure.

How Does this unit Integrate With Existing Control Networks?

this unit provides two gigabit Ethernet ports and three serial channels, so it can sit between a plant network and legacy field devices. COM1 covers RS232, RS485, and RS422, while COM2 offers RS485/RS422 and COM3 provides RS232. An HDMI 2.0A port supports 1080p display output, and two USB 3.0 Type-A ports on the rear IO accept peripherals. WiFi and 4G are listed as optional, so confirm the exact configuration with the supplier before specifying a wireless link.

Integration Note: wiring into a plant Ethernet or serial network may require an external gateway or connection module. Confirm cable types and gateway compatibility with PetroPartsOnline before commissioning.

Figure 2: Technical layout and connection details for the Flexem FPad710 Touch Panel 4-wire industrial resistance touch screen.

Installation and Environmental Limits

The unit is flush-mounted and requires a 260x202mm cutout, with an overall size of 274x214x27mm and a weight of about 1,450g. The non-ferrous alloy housing keeps the assembly light enough for single-person installation on a panel door. Because the rear is rated IP20, keep the enclosure interior free of conductive dust and moisture. Humidity should stay within 10~90%RH non-condensing.

Operating this unit in a high UV environment is prohibited. Mount the panel away from direct sunlight or fit an enclosure shield if the cabinet face is exposed outdoors. Natural cooling means no fan filter to service, which reduces maintenance touch points in dirty plant areas.

Reliability and Maintenance Planning

With a rated power below 10W and natural cooling, this unit generates little heat inside a sealed cabinet. The 50000-hour LCD lifetime gives maintenance planners a reference point for backlight replacement scheduling. Periodic inspection should cover the front gasket seal, the power connector, and the touch surface for scratches that could affect the 4-wire resistive layer. The isolated power adapter with lightning surge protection should be checked after storm events on exposed sites.

Because the unit tolerates power interruptions shorter than 5mS, brief transfer switching on a backup supply is less likely to force a reboot. This is a qualitative benefit for mission-critical operator stations where a restart interrupts production visibility.

Applications in Oil and Gas Operations

Typical duties include wellhead control panel interfaces, pipeline monitoring stations, and compressor house operator terminals. In each case, the combination of a 10.1-inch 1280x800 display and 4-wire resistive touch supports clear status presentation and reliable input. The dual gigabit Ethernet ports allow separation of control and supervisory traffic, while the serial channels connect to legacy meters and drives. For skid-mounted packages, the flush-mount design and 27mm depth help fit the unit into shallow enclosures.

Frequently Asked Questions

What input voltage does this unit require?

The Flexem this unit is rated for DC24V input and operates across a working range of DC 18V~28V. Its isolated power adapter includes lightning surge protection, and the unit tolerates power interruptions shorter than 5mS.

Can this unit operate in high-temperature plant areas?

this unit has an operating temperature range of -10~60˚C and a storage range of -20~70˚C. It uses natural cooling and should be installed where humidity stays within 10~90%RH non-condensing.

What type of touch screen does this unit use?

The Flexem this unit uses a 4-wire industrial resistance touch screen. This touch technology supports input through gloves or a stylus, which suits oil and gas operators working near machinery.

Which serial interfaces are available on this unit?

this unit provides COM1 as RS232/RS485/RS422, COM2 as RS485/RS422, and COM3 as RS232. Two gigabit Ethernet ports and two USB 3.0 ports are also available for network and peripheral connections.

Is this unit suitable for outdoor installation?

this unit carries front IP65 protection with a NEMA panel and rear IP20 protection. Operating in a high UV environment is prohibited, so outdoor mounting requires a suitable enclosure shield. Confirm the application conditions with PetroPartsOnline before ordering.

Contact PetroPartsOnline for parts suited to your application's requirements.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap