+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

DS200PCCAG7ACB | GE Power Connect Card <600 V rms AC

Introduction:

The DS200PCCAG7ACB from GE is a Mark V series Power Connect Card rated for <600 V rms AC. It interfaces the drive with the SCR power bridge and is not repairable.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: GE
Part Number: DS200PCCAG7ACB
Type: Not repairable and does not contain serviceable parts
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

What the GE DS200PCCAG7ACB Power Connect Card Does

The GE this unit is a Power Connect Card from the Mark V series. It serves as the interface between the drive and the SCR power bridge, and it is rated for <600 V rms AC volts. Because the board is not repairable and contains no serviceable parts, a fault requires full replacement rather than component-level repair.

For oil and gas operators, that design choice has a direct cost consequence. A failed power connect card can halt a critical drive, and the absence of field-repairable parts means the fastest path back to service is a verified replacement unit. Sourcing a dependable board before a failure occurs protects production uptime and avoids premium expediting costs.

Figure 1: Front view of the GE DS200PCCAG7ACB Not repairable and does not contain serviceable parts showing its physical design and enclosure.

Key Specifications and Cost Implications

  • Input voltage: <600 V rms AC volts, which defines the drive systems this card can support.
  • Manufacturer: General Electric, with the board built for the Mark V control platform.
  • Product type: Power Connect Card, functioning as the drive-to-SCR bridge interface.
  • Series: Mark V, aligning with the associated drive and control architecture.
  • Repairability: Not repairable and does not contain serviceable parts, so replacement is the only corrective action.

Each of these parameters affects lifecycle cost. The <600 V rms AC rating determines compatibility with the installed power stack, so a mismatched board cannot be used as a stopgap. The Mark V series alignment ensures the card fits the existing control scheme without adapter hardware. Most importantly, the non-repairable design means maintenance budgets should account for spare-board inventory rather than repair labor. Keeping a correct spare on hand reduces the risk of extended downtime and the higher costs that come with emergency sourcing.

How Does the Non-Repairable Design Affect Maintenance Planning?

Because this unit contains no serviceable parts, maintenance planning shifts from repair to replacement readiness. When the board exhibits unexpected behavior, the recommended action is to replace it entirely. This simplifies troubleshooting: technicians do not need to isolate failed components on the card, and they avoid the labor and uncertainty of bench repair.

From a cost perspective, the strategy is straightforward. A planned replacement during a scheduled outage costs far less than an unplanned trip caused by a failed interface card. Storing a spare this unit eliminates the lead-time risk associated with sourcing a rare Mark V component after a failure. It also allows maintenance teams to combine board replacement with other outage tasks, reducing total labor hours.

Figure 2: Technical layout and connection details for the GE DS200PCCAG7ACB Not repairable and does not contain serviceable parts.

Installation and Replacement Guidance

Safe installation requires the drive to be powered off. During this state, inspect the motor and surrounding components for dust or debris accumulation. Use a mild cleaner and a cleaning cloth, and avoid harsh cleaners that could damage terminals, connectors, or solder points. Check that all wires and cables are secure, and inspect for fraying, wear, or worn insulation. Tighten loose cables according to the torque guidelines on the drive label.

While the drive is offline for board replacement, perform periodic maintenance on the motor as well. Manually spin the motor in both directions to confirm it turns freely, and use a wrench to tighten the bolts holding the motor in place. Combining these tasks with the board swap avoids a separate maintenance window and lowers the overall cost of the outage. For detailed procedures, refer to the GEI-100161 instructional manual.

Reliability in Oil and Gas Environments

Power connect cards operate in demanding conditions where vibration, temperature swings, and electrical noise are routine. This unit is built for these demanding environments as part of the Mark V platform. Its role as the interface to the SCR power bridge makes it mission-critical: a failure here interrupts the drive's power conversion path.

Reliability therefore has a measurable cost dimension. Each avoided failure prevents lost production and emergency procurement expenses. Operators should treat this unit as a critical spare and verify that replacement units are sourced through channels that understand Mark V systems. PetroPartsOnline provides application-specific selection guidance so that the correct board is supplied for the installed drive configuration.

FAQ

What is the voltage rating of the GE this unit?

The GE this unit is rated for <600 V rms AC volts. This rating defines the drive systems in which the card can be applied.

Can this unit be repaired?

No. This unit is not repairable and does not contain serviceable parts. If it exhibits unexpected behavior, it should be replaced entirely.

Which series does this unit belong to?

this unit belongs to the GE Mark V series and functions as a Power Connect Card interfacing the drive with the SCR power bridge.

What maintenance is recommended during this unit replacement?

With the drive powered off, inspect the motor for dust and debris, clean with a mild cleaner, check cable tightness, and verify the motor spins freely. Refer to the GEI-100161 manual for full procedures.

Where can I source a this unit for a critical drive?

Contact PetroPartsOnline for parts suited to your application's requirements. The site supplies industrial automation and oil and gas components, including Mark V series boards.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap