22A-A4P5N104 | Allen-Bradley 0.75 kW 1-Phase AC Drive



Introduction:
The Allen-Bradley 22A-A4P5N104 is a 0.75 kW, 1-phase PowerFlex 4 AC drive with RS-485 DSI and IP20 protection, built for demanding oil and gas environments.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The Allen-Bradley 22A-A4P5N104 is a AC adjustable-frequency drive — PowerFlex 4 for industrial control and automation applications.
When a Legacy Pump Skid Needs Dependable Speed Control
A field engineer faces a familiar challenge: a 1 HP pump on a remote well pad must run from a single-phase 240V AC supply, yet the process demands controlled acceleration and reliable overload protection. The Allen-Bradley 22A-A4P5N104 answers that need. It is a PowerFlex 4 AC adjustable-frequency drive rated 0.75 kW (1 HP) with 4.5 A continuous output current, built for demanding environments.
This panel-mount drive accepts 200…240V AC single-phase input and delivers 0…230V three-phase output. Its integral brake IGBT and built-in RS-485 DSI port make it a practical choice for mission-critical skids where space and wiring simplicity matter.

Key Specifications of this drive Drive
- Input voltage: 200…240V AC, 1-phase, with ±10 % tolerance and a published input range of 180…265V AC.
- Input frequency: 50/60 Hz supply.
- Rated output: 0.75 kW (1 HP) at 4.5 A continuous, 0…230V three-phase.
- Output frequency: 0…240 Hz programmable.
- Carrier frequency: 2…16 kHz, rating based on 4 kHz.
- Operating temperature: -10…+50 °C for IP20/Open Type; -10…+40 °C with the IP30/NEMA 1 kit.
- Storage temperature: -40…+85 °C.
- Power supply: 2.25 kVA input rating at 10.0 A input current, 15 A branch fuse.
- Enclosure: Panel mount, IP20 / NEMA/UL Type Open.
- Dimensions: 152.0 H × 80.0 W × 136.0 D mm; 1.4 kg shipping weight.
The operating temperature window deserves attention in oil and gas service. At -10…+50 °C for the open type, the drive tolerates cold starts and hot afternoon conditions inside a ventilated enclosure. Adding the field-installed 22-JBAA kit raises protection to IP30/NEMA 1 but narrows the upper limit to +40 °C. Engineers should weigh enclosure protection against thermal headroom during selection.
How Does the Drive Handle Power Instability?
Remote sites rarely enjoy clean power. This drive provides 100 ms faultless power ride-through and logic control ride-through of 0.5 s minimum, 2 s typical. The DC bus trips at 405 V DC overvoltage and 210 V DC undervoltage. Overcurrent protection reaches 200 % hardware limit and 300 % instantaneous fault. Intermittent overload is 150 % of rated output current for 60 s and 200 % for 3 s, published as I2t motor protection providing Class 10 protection.
Efficiency is 97.5 % typical. Power dissipation totals 55 W at rated load, split into 35 W external and 20 W internal. These figures help panel builders size enclosures and ventilation correctly.

Control, I/O and RS-485 Integration
Three dedicated digital inputs handle Stop, Start/Run FWD and Direction/Run REV, with two more programmable. Input current is 6 mA, and SRC mode reads 18…24V DC as ON while SNK mode reads 0…6V DC as ON. One analog input accepts 0…10V DC at 100 kΩ or 4…20 mA at 250 Ω, DIP-selectable. A single programmable Form C relay output is rated 3.0 A resistive at 30V DC, 125V AC and 240V AC.
The built-in RS-485 DSI port supports Modbus RTU with function codes 03, 06 and 16. Node addresses run 1…247, and baud rate is 1200…38400 bit/s with a default of 9600. Format is RTU 8-N-1, and repeaters may be required beyond 32 nodes. No communication option-card slot is published for the PowerFlex 4. External adapters mount through the 22-XCOMM-DC-BASE kit.
Where This Drive Fits in Field Operations
Oil and gas engineers deploy compact drives like this on single-phase pump skids, small blowers and metering pumps. The 40:1 speed range with ±2 % regulation supports gradual ramp changes that protect mechanical seals. Two independently programmable accel and decel times, each 0…600 s in 0.1 s increments, allow soft starts on equipment that dislikes shock loading.
Because the drive carries cULus Listing to UL 508C and CSA C22.2 No. 14 plus CE conformity to EN 61800-3 and EN 61800-5-1, it suits panel builds destined for regulated facilities. Note that the drive ships without an integral EMC filter. CE compliance requires an external filter, and the published L Type filter for this rating is 22-RF010-AL.
Lifecycle Status and Sourcing
Official product data lists this drive as discontinued, with a discontinuation date of 2025-06-30. The published engineering replacement is 25A-A4P8N104. Teams maintaining existing skids should plan migration carefully and verify current lifecycle status and availability with PetroPartsOnline before ordering.
For operators standardizing on the PowerFlex 4 platform, spare drives remain a practical path to keeping legacy panels running. Contact PetroPartsOnline for parts suited to your application's requirements.
Frequently Asked Questions
What input voltage does the 22A-A4P5N104 require?
The Allen-Bradley 22A-A4P5N104 accepts 200…240V AC single-phase input with ±10 % tolerance. Its published input range is 180…265V AC at 50/60 Hz, and the input rating is 2.25 kVA at 10.0 A with a 15 A branch fuse.
What is the operating temperature range of the 22A-A4P5N104?
The Allen-Bradley 22A-A4P5N104 operates from -10…+50 °C in its IP20/Open Type enclosure. Fitting the 22-JBAA kit for IP30/NEMA 1 protection reduces the upper limit to +40 °C. Storage temperature spans -40…+85 °C.
Does the 22A-A4P5N104 support Modbus communication?
Yes. The Allen-Bradley 22A-A4P5N104 provides a built-in RS-485 DSI port supporting Modbus RTU with function codes 03, 06 and 16. Node addresses range 1…247 and baud rates span 1200…38400 bit/s, defaulting to 9600 in RTU 8-N-1 format.
Is the 22A-A4P5N104 still available for new projects?
Official product data lists the Allen-Bradley 22A-A4P5N104 as discontinued as of 2025-06-30, with the 25A-A4P8N104 published as the engineering replacement. Verify current lifecycle status and availability with PetroPartsOnline before specifying it for new builds.
What output does the 22A-A4P5N104 deliver?
The Allen-Bradley 22A-A4P5N104 delivers 0.75 kW (1 HP) at 4.5 A continuous output current, with 0…230V three-phase output and 0…240 Hz programmable output frequency. Intermittent overload reaches 150 % for 60 s and 200 % for 3 s.
