+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

Bently Nevada 3300 XL vs 3300 XL NSv vs 3300 XL 11 mm: Proximity Transducer Selection Guide

2026-11-18
Operators at turbomachinery protection system configuration station
ExcerptTL;DR: You can choose a Bently Nevada 3300 Proximity Transducer in three current families — the 3300 XL NSv (1.5 mm / 60 mil range, newer), the 3300 XL 8 mm (2 mm / 80 mil) and the 3300 XL 11 mm (4 mm / 160 mil, legacy larger range). The 11 mm uses 330730 […]

TL;DR: You can choose a Bently Nevada 3300 Proximity Transducer in three current families — the 3300 XL NSv (1.5 mm / 60 mil range, newer), the 3300 XL 8 mm (2 mm / 80 mil) and the 3300 XL 11 mm (4 mm / 160 mil, legacy larger range). The 11 mm uses 330730 extension cables with 330780 Proximitors; the NSv uses 330731 cables with 330980 Proximitors. Cable, Proximitor and probe are tuned as a matched set — mixing families detunes the LC circuit and corrupts scale factor.

The GSC query volume we see on this site tells the story: buyers are searching for single part numbers such as 330730-040-01-01, 330730-040-02-00, 330780-50-00, 330980-50-00 and 330906-02-12-10-02-05 — then bounce because the page does not directly answer "which family is this part in, and what must I order to complete the set?" This guide maps the suffix to the family, the matching Proximitor and cable, and the core trade-offs.

Three 3300 families — which is which?

Today's active Bently Nevada / Baker Hughes eddy-current proximity transducer families are the 3300 XL 11 mm (legacy but still required), 3300 XL NSv (new, smaller linear range), and 3300 XL 8 mm (legacy mid-range). All use the same eddy-current principle — a probe coil driven by a Proximitor oscillator, returning gap voltage proportional to shaft position — but differ sharply in linear range, scale factor, cable capacitance and Proximitor LC tuning. Mixing families is the number one root cause of wrong readings.

FamilyLinear rangeScale factorProximitor partCable partTypical probeBest for
3300 XL 11 mm4.0 mm (160 mil)3.94 V/mm (100 mV/mil)330780-xx-xx330730-xx-xx-xx330104 / 330106 / 330107 11 mmCentrifugal compressors with larger journal clearance; applications that need the 160 mil range
3300 XL 8 mm2.0 mm (80 mil)3.94 V/mm (100 mV/mil)330780-xx-xx (compatible 8 mm Proximitor variants)330730-series (matched capacitance to 8 mm probe)330108 8 mm probeStandard industrial turbomachinery, smaller clearance
3300 XL NSv1.5 mm (60 mil)1.97 V/mm (50 mV/mil)330980-xx-xx330731-xx-xx-xx (different capacitance profile, not interchangeable with 330730)330906 / 330907 reverse-mount NSv probesTight-installation centrifugal air compressors, refrigeration compressors, process gas compressors (Baker Hughes NSv target list)

Source: Baker Hughes 3300 XL NSv Proximity Transducer System Datasheet (Doc. 147385 Rev. R); 3300 XL 11 mm announcement press release (January 2017). Cable capacitance values per spareoil.com 330730 datasheet — 69.9 pF/m typical for 330730, NSv cable capacitance is a separate window.

How do I decode a part number to tell which family it belongs to?

The first 5–6 digits of the Bently part number map directly to the family — suffix digits are cable length, connector type, approval codes and factory options. Reading the prefix is fast enough to avoid ordering the wrong system.

PrefixFamilyWhat it isSuffix meaning
3307303300 XL 11 mm11 mm extension cable330730-040-01-00: 040 = 4.0 m, 01 = armored ClickLock, 00 = standard approval
3307313300 XL NSvNSv extension cableSame suffix structure, different capacitance — not interchangeable with 330730
3307803300 XL 11 mm11 mm Proximitor Sensor330780-50-00: 50 = standard connector, 00 = standard factory option; 90-CN = pre-wired CN cable
3309803300 XL NSvNSv Proximitor Sensor (replaces 330780 for NSv systems)330980-50-00, 70, 71, 72 = connector/cable variants for panel-mount, backplane-mount or pre-wired; -CN options for regional approvals
330906 / 3309073300 XL NSvReverse-mount NSv probe330907-05-30-70-12-CN style digits: probe tip Ø (05), cable ID (30), housing (70), cable length in ft (12), CN = cable option

Can a 330780 11 mm Proximitor drive a 3300 XL NSv probe, or vice versa?

No. The Proximitor LC circuit is factory-tuned against the total capacitance of the probe + cable. 3300 XL 11 mm Proximitors expect 330730 cables with 69.9 pF/m and a 11 mm probe; 3300 XL NSv Proximitors (330980) expect 330731 cables with a different capacitance profile and an NSv probe. Mixing them detunes the LC circuit — gap voltage no longer corresponds to gap, and the 3500 Machinery Protection System will flag false alarms. If you are planning a swap, the correct action is to replace probe + cable + Proximitor as a set.

That said, there is one gray area: some 3500 racks accept both 11 mm and NSv transducer inputs on different channels — the rack is not the limiter, the matched Proximitor/cable/probe capacitance window is. If you have a mixed rack and are adding channels, call us with the rack model and existing channels and we will quote the matching Proximitor + cable + probe set.

FAQ

I need a replacement for a 330780-50-00 Proximitor on a 3500 rack — can I just plug in a 330980-50-00 NSv Proximitor?

No. The 330780 and 330980 Proximitors are tuned for different cable and probe capacitance windows. Your 3500 rack will accept either Proximitor family on different channels, but a direct cross-family swap without also replacing the probe and extension cable will detune the LC circuit and produce wrong gap-voltage readings that look like real vibration alarms. If you want to move an existing 11 mm channel to NSv, replace probe (330906 / 330907) + cable (330731-series, not 330730) + Proximitor (330980-50-00) as a set. We stock both legacy (330780-50-00) and NSv Proximitors — write us with your current part number for a matched-set quote.

My extension cable is too short — can I splice a length of 330730 cable onto the end?

Do not splice. 330730 cables are ClickLock miniature coaxial connectors with a tight capacitance tolerance (69.9 pF/m). Splices introduce impedance discontinuities that corrupt scale factor, even if the cable segment itself is a genuine Bently part. Order the correct total cable length as one part — the full suffix-code matrix is what tells you which 330730 part covers your total transducer-system length (probe cable + extension cable). Call us with your current probe part number, existing Proximitor part number and the total run length and we will quote the correct 330730 part number.

Is Baker Hughes discontinuing the 3300 XL 11 mm family in favour of NSv?

No end-of-life notice has been issued for 330780-series Proximitors or 330730-series 11 mm extension cables at the time of writing. The 3300 XL 11 mm family is still required on centrifugal compressors and other machines that need the 4.0 mm (160 mil) linear range — the NSv 1.5 mm (60 mil) range tops out too soon. Our lead time and stock on both 11 mm and NSv parts are RFQ-determined — call us with your part number and destination country for a firm quote.

We stock 330730 extension cables (4 m and 8 m variants), 330780 legacy Proximitors and the NSv family (330906/330907 probes, 330980 Proximitors). Stated lead times and stock are RFQ-determined — call or write us with the part number and destination country.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap