+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

TM3DI32K | Schneider Electric 32-Input 24 V DC Module

Introduction:

Schneider Electric TM3DI32K discrete input module delivers 32 sinking or sourcing 24 V DC inputs over HE-10 connectors for Modicon M221, M241, M251 and M262 controllers.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: Schneider Electric
Part Number: TM3DI32K
Type: Discrete input module
Condition: Subject to stock check
Shipping Port: Xiamen

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

What the Schneider Electric TM3DI32K Delivers in the Field

The Schneider Electric this module is a Modicon TM3 discrete input module with 32 inputs, HE-10 connection and 24 V DC input voltage. It is built for demanding environments where discrete status signals from field devices must reach the controller reliably.

From a maintenance engineer's perspective, this module is straightforward to service. Each input channel has its own green status LED, so a technician can trace a faulty field device without a laptop. The module mounts on standard DIN rail or panel, and the front-face diagnostics support fast fault isolation during planned shutdowns or unplanned stoppages.

Figure 1: Front view of the Schneider Electric TM3DI32K Discrete input module showing its physical design and enclosure.

Key Specifications of this module Input Module

  • Input count: 32 discrete inputs conforming to IEC 61131-2 Type 1.
  • Input logic: Sink or source (positive/negative) configuration.
  • Input voltage: 24 V DC, with state 1 guaranteed from 15 to 28.8 V.
  • Input current: 5 mA per input; input impedance 4.4 kOhm.
  • Response time: 4 ms turn-on and 4 ms turn-off.
  • Electrical connection: HE-10 connector for inputs.
  • Status indication: One green LED per channel for input status.
  • Operating temperature: -10 to 35 °C vertical installation; -10 to 55 °C horizontal installation.
  • Power supply: 5 V DC via bus connector (5 mA at state off, 65 mA at state on).
  • Dimensions: 90 mm height, 81.3 mm depth, 33.5 mm width; 0.1 kg weight.

The 4 ms response time matters on packaging and material-handling lines where sensor pulses are short. Because the module reports state changes quickly, the controller can react before a product leaves its detection zone. The 5 mA input current also keeps field-device loading predictable across all 32 channels.

How Does this module Handle Harsh Operating Conditions?

Oil and gas panels often sit in areas with vibration, electrical noise and temperature swings. This module is tested for electrostatic discharge at 8 kV in air and 4 kV on contact per EN/IEC 61000-4-2. It also resists electromagnetic fields at 10 V/M from 80 MHz to 1 GHz per EN/IEC 61000-4-3.

For marine and offshore installations, the module carries marine specification approval from LR, ABS, DNV and GL. Vibration resistance is rated at 3.5 mm from 5 to 8.4 Hz and 3 gn from 8.4 to 150 Hz on DIN rail or panel. Shock resistance is 15 gn for 11 ms. These ratings support dependable operation on skids, wellhead panels and compressor stations where constant vibration is normal.

The IP20 rating applies with the protective cover in place, so keep the cover fitted in dusty or washdown-adjacent areas. Operating altitude is 0 to 2000 m, which covers most onshore and offshore facilities.

Figure 2: Technical layout and connection details for the Schneider Electric TM3DI32K Discrete input module.

Installation and Commissioning Notes

Mount the module on top hat type TH35-15 or TH35-7.5 rail conforming to IEC 60715, or on a plate with a fixing kit. Keep unshielded input cable runs under 30 m between devices to stay within the module's stated maximum cable distance. For longer runs, review the wiring plan with the panel designer before commissioning.

The module is compatible with Modicon M241, M251, M221 and M262 controllers. It draws power from the controller bus connector, so no separate field supply is needed for the logic side. Insulation between input and internal logic is rated at 500 V AC, while inputs are non-insulated between each other. Confirm the sink or source configuration matches the field device wiring before power-up.

Maintenance and Reliability Practices

During routine inspections, check that the green channel LEDs match the expected field-device states. A channel that stays on or off when the sensor changes state points to a wiring fault, a failed sensor or a module input issue. Because each channel has its own LED, diagnosis is fast and does not require a programming terminal.

Keep the DIN rail and panel free of conductive dust, and verify that the protective cover remains in place to maintain the IP20 rating. In high-vibration areas, re-torque panel fixings at planned shutdown intervals. The module's 4 ms response time and 5 mA input current are stable specifications, so any change in observed behavior usually traces to field wiring or the sensor rather than the module itself.

For critical operations, keep a spare module on the shelf. The compact 33.5 mm width and 0.1 kg weight make change-out quick when a channel fails during a production window.

Frequently Asked Questions

What controllers are compatible with the Schneider Electric this module?

The Schneider Electric this module is compatible with Modicon M241, M251, M221 and M262 controllers. Confirm the controller firmware and rack configuration support the TM3 expansion before ordering.

Can this module inputs be wired as sinking or sourcing?

Yes. The Schneider Electric this module supports sink or source (positive/negative) input logic. Match the wiring to the field device output type and verify the state 1 voltage range of 15 to 28.8 V before commissioning.

What is the operating temperature range of this module?

The Schneider Electric this module operates from -10 to 35 °C in vertical installation and -10 to 55 °C in horizontal installation. Storage range is -25 to 70 °C. Plan panel airflow so the module stays within these limits.

How much current does this module draw from the bus?

The Schneider Electric this module draws 5 mA at 5 V DC from the bus connector when inputs are off and 65 mA at 5 V DC when inputs are on. No 24 V DC bus current is drawn at either state.

What cable length is supported for this module inputs?

The Schneider Electric this module supports unshielded cable runs under 30 m for regular inputs. Keep field wiring within this distance to maintain signal integrity in electrically noisy plant areas.

Contact PetroPartsOnline for parts suited to your application's requirements.

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap