The FANUC A02B-0120-K321 is a Legacy control generation for industrial control and automation applications.

What the FANUC A02B-0120-K321 Connector Kit Does

The FANUC A02B-0120-K321 is a connector assembly kit for FANUC Series 16/18 CNC wiring. It is a passive component that carries no independent power consumption and takes its electrical and environmental ratings from the host CNC. For maintenance teams supporting legacy FANUC controls, this kit provides a field-proven way to renew wiring connections without changing the control platform.

Because the kit is passive, it introduces no separate supply voltage requirement. Instead, it operates as part of the host system, which simplifies spares planning for rugged, mission-critical machine shops and oil and gas production facilities running older FANUC equipment.

Key Specifications of This unit

• Brand: FANUC
• Series: FANUC Series 16/18 CNC
• Connector: connector assembly kit (multi-source consensus; supplier-reported)
• Dimensions (H×W×D): 10 × 150 × 80 mm (supplier-reported single source; DO Supply, 1×15×8 cm)
• Weight: ~0.03 kg (supplier-reported single source; DO Supply, 0.06 lbs)
• Supply voltage: Not applicable (passive component; cable/connector/fuse/memory card; powered by host system)
• Power consumption: Not applicable (passive component; no independent power consumption)
• Operating temperature: Not applicable (passive component; rating follows host CNC)
• Storage temperature: Not applicable (passive component; rating follows host CNC)
• Relative humidity: Not applicable (passive component; rating follows host CNC)

The 10 × 150 × 80 mm envelope and ~0.03 kg weight make the kit easy to store and handle during cabinet work. Because the operating temperature, storage temperature and relative humidity ratings follow the host CNC, the connector kit is suited to the same demanding environments as the Series 16/18 control itself.

How This Connector Kit Compares with Other Spare-Part Options

When sourcing a wiring solution for a legacy FANUC control, buyers typically weigh three options: a complete connector assembly kit, individual loose contacts and housings, or a third-party equivalent harness. This unit is supplied as a connector assembly kit, which means the mating hardware arrives as a set rather than as separate piece parts.

• Connector assembly kit (this model): supplied as a set for Series 16/18 CNC wiring; passive, with no independent power draw.
• Loose contacts and housings: require separate sourcing and matching; no kit-level traceability to the FANUC series.
• Third-party equivalent harness: may fit the physical connector, but carries no FANUC series designation.

For teams that value reliability you can depend on, the kit format reduces the number of line items to specify and store. It also keeps the part number tied directly to the FANUC Series 16/18 CNC platform, which helps maintenance planners confirm fit before ordering.

Installation and Integration Notes

This unit is a passive connector kit, so it has no built-in communication ports and no protocol of its own. It does not require a separate supply voltage, because it is powered by the host system. During installation, route and secure the wiring in line with the host CNC cabinet practice, and confirm connector seating before power-up. Because the kit follows the host CNC for temperature and humidity limits, verify the cabinet environment against the control's own ratings rather than a standalone kit rating.

If the connector kit is part of a fieldbus-linked machine, note that wiring into such networks may require an external gateway or connection module. Confirm cables and gateways with PetroPartsOnline before ordering.

Maintenance and Reliability in Legacy CNC Cabinets

Connector kits are wear points in any control cabinet. Vibration, repeated cable movement and airborne contaminants can loosen contacts over time, so inspect periodically and reseat connectors as part of scheduled maintenance. Because the kit is passive and has no independent power consumption, it adds no heat load to the cabinet. Its ~0.03 kg weight also means it places minimal strain on cable bundles. For legacy Series 16/18 controls, keeping a spare connector kit on the shelf supports faster recovery when a wiring fault interrupts production.

Frequently Asked Questions

What is the FANUC unit used for?

The FANUC unit is a connector assembly kit for FANUC Series 16/18 CNC wiring. It is a passive component that is powered by the host system and has no independent power consumption.

Does This unit require its own supply voltage?

No. The FANUC unit is a passive component, so supply voltage is not applicable; it is powered by the host CNC system.

What are the dimensions and weight of This unit?

The FANUC unit measures 10 × 150 × 80 mm and weighs approximately 0.03 kg, based on supplier-reported data.

What operating temperature does This unit support?

Operating temperature is not applicable for the FANUC unit as a standalone figure; the rating follows the host CNC. The same applies to storage temperature and relative humidity.

Is This unit compatible with other FANUC CNC series?

The FANUC unit is designated for FANUC Series 16/18 CNC wiring. Contact PetroPartsOnline for parts suited to your application's requirements before specifying it for another control generation.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "A02B-0120-K321 | FANUC Connector Kit for Series 16/18 CNC", "mpn": "A02B-0120-K321", "sku": "A02B-0120-K321", "brand": {"@type": "Brand", "name": "FANUC"}, "description": "The FANUC A02B-0120-K321 is a Legacy control generation for industrial control and automation applications. What the FANUC A02B-0120-K321 Connector Kit Does The FANUC A02B-0120-K321 is a connector assembly kit for FANUC Series 16/18 CNC wiring. It is a passive component that carries no independent power consumption and takes its electrical and environmental ratings from the host CNC. For maintenance teams supporting legacy FANUC controls, this kit provides a field-proven way to renew wiring conn", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1793681935-A02B-0120-K321_1__fp6a835c9f.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793681939-A02B-0120-K321_2__fpaa00f303.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793681946-A02B-0120-K321_3__fp850ce28c.jpg"], "category": "I/O Modules"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What is the FANUC unit used for?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit is a connector assembly kit for FANUC Series 16/18 CNC wiring. It is a passive component that is powered by the host system and has no independent power consumption."}}, {"@type": "Question", "name": "Does This unit require its own supply voltage?", "acceptedAnswer": {"@type": "Answer", "text": "No. The FANUC unit is a passive component, so supply voltage is not applicable; it is powered by the host CNC system."}}, {"@type": "Question", "name": "What are the dimensions and weight of This unit?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit measures 10 × 150 × 80 mm and weighs approximately 0.03 kg, based on supplier-reported data."}}, {"@type": "Question", "name": "What operating temperature does This unit support?", "acceptedAnswer": {"@type": "Answer", "text": "Operating temperature is not applicable for the FANUC unit as a standalone figure; the rating follows the host CNC. The same applies to storage temperature and relative humidity."}}, {"@type": "Question", "name": "Is This unit compatible with other FANUC CNC series?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit is designated for FANUC Series 16/18 CNC wiring. Contact PetroPartsOnline for parts suited to your application's requirements before specifying it for another control generation."}}]}]}