Overview

The Schneider Electric 140CRP93200C is a RIO head-end adapter module. This unit belongs to the Modicon Quantum automation platform. It manages remote I/O communication for distributed control systems. The 140CRP93200C supports up to 31 drops per network. Industrial users trust this module for reliable remote I/O networking.

This head-end adapter communicates via 75 Ohm coaxial cable. The transmission rate reaches 1544 Mbit/s for fast data exchange. Each drop supports 64 inputs and 64 outputs. The conformal coating protects against harsh environments.

Technical Specifications

The 140CRP93200C is a RIO head-end adapter for Modicon Quantum systems.

Main Specifications

• Manufacturer: Schneider Electric

• Product Type: RIO head-end adapter module

• Product Line: Modicon Quantum

• Range of Product: Modicon Quantum automation platform

Network Specifications

• Maximum Drops per Network: 31

• I/O Words per Drop: 64 inputs / 64 outputs

• Type of Cable: 75 Ohm coaxial cable

• Transmission Rate: 1544 Mbit/s

• Dynamic Range: 35 dB

Product Compatibility

• Compatible With: Symax (any mix)

• Compatible With: Quantum 200/500/800 series

Electrical Specifications

The 140CRP93200C provides robust electrical performance.

Power and Isolation

• Isolation Voltage: 500 V DC (coaxial center and ground)

• Power Dissipation: 3 W (2 channels)

• Bus Current Requirement: 750 mA (2 channels)

Electrical Connection

• Connector Type: 2 female connectors F, elbowed with redundant cable

Diagnostics and Status

The 140CRP93200C includes power-up diagnostics for reliable operation.

Diagnostic Checks

• Power Up: System initialization check

• LAN Controller Check: Network interface verification

• Memory Check: Internal memory validation

Physical Specifications

The 140CRP93200C has a standard module format for Quantum systems.

Module Format

• Format: Standard

Package 1 Dimensions

• Unit Type of Package 1: PCE

• Number of Units in Package 1: 1

• Package 1 Height: 4.5 cm

• Package 1 Width: 16.5 cm

• Package 1 Length: 31.0 cm

• Package 1 Weight: 548.0 g

Environmental Specifications

The 140CRP93200C operates reliably in industrial environments.

Protective Treatment

• Type: Conformal coating (Humiseal 1A33)

Temperature Ranges

• Ambient Air Temperature (Operation): 0°C to 60°C (32°F to 140°F)

• Ambient Air Temperature (Storage): -40°C to 85°C (-40°F to 185°F)

Other Environmental Ratings

• Relative Humidity: 95% without condensation

• Operating Altitude: ≤ 5000 meters (16,404 feet)

Standards and Certifications

The 140CRP93200C meets international standards for industrial control equipment.

Product Certifications

• FM Class 1 Division 2: Hazardous location approval

• CE Marking: European conformity

Standards Compliance

• UL 508: Industrial control equipment

• CUL: Canadian UL certification

• CSA C22.2 No 142: Canadian standard

Electromagnetic Compatibility

• Electrostatic Discharge (IEC 801-2): 4 kV contact, 8 kV on air

• Electromagnetic Fields (IEC 801-3): 10 V/m, 80 to 1000 MHz

Key Features

The 140CRP93200C provides head-end RIO communication for Modicon Quantum systems. The module supports up to 31 remote drops on a single network. Each drop handles 64 inputs and 64 outputs. This configuration suits large distributed control systems.

The 75 Ohm coaxial cable ensures signal integrity over long distances. The 1544 Mbit/s transmission rate supports real-time control applications. The 35 dB dynamic range provides effective signal processing. The redundant cable connection improves network reliability.

The isolation voltage of 500 V DC protects against ground loops. The low power dissipation of 3 W reduces heat in the cabinet. The bus current requirement is 750 mA for two channels. The conformal coating protects against moisture and contaminants.

The power-up diagnostics verify LAN controller and memory integrity. The module operates from 0°C to 60°C ambient temperature. Storage range extends from -40°C to 85°C. The 95% non-condensing humidity rating suits harsh environments.

Installation Guidelines

Install the 140CRP93200C in a Modicon Quantum rack. Insert the module into the designated slot. Secure the module with the retaining screws. Connect the 75 Ohm coaxial cables to the female F connectors.

Use the elbowed connectors for tight panel spaces. Connect both redundant cables for network reliability. Terminate the coaxial cable properly at each drop. Verify the dynamic range does not exceed 35 dB.

Set drop addresses according to your network design. Follow Schneider Electric guidelines for RIO network layout. Ensure proper grounding for the coaxial cable shield. Test communication before commissioning.

Package Contents

• Schneider Electric 140CRP93200C RIO Head-End Adapter Module (1 unit)

• 2 female F connectors (elbowed, factory installed)

• Conformal coating (factory applied)

• Installation manual

Frequently Asked Questions (FAQ)

1. What is the maximum number of drops supported by the 140CRP93200C?
The 140CRP93200C supports up to 31 drops per network. Each drop can have 64 inputs and 64 outputs. This supports large distributed control systems.

2. What type of cable does the 140CRP93200C use?
The 140CRP93200C uses 75 Ohm coaxial cable. The transmission rate is 1544 Mbit/s. The dynamic range is 35 dB. Two female F elbowed connectors provide redundant cable connection.

3. Does the 140CRP93200C have conformal coating?
Yes. The 140CRP93200C includes conformal coating (Humiseal 1A33). This protects the module from moisture and contaminants. It is suitable for harsh industrial environments.

4. What is the isolation voltage of the 140CRP93200C?
The 140CRP93200C has an isolation voltage of 500 V DC. This rating applies between coaxial center and ground. It ensures safe operation and protects against ground loops.

5. What certifications does the 140CRP93200C hold?
The 140CRP93200C holds UL 508, CUL, and CSA C22.2 No 142 certifications. It also has FM Class 1 Division 2 approval. CE marking is included for European compliance.