PM857K02 | ABB SIL3 CPU Board 24 V DC



Introduction:
The ABB PM857K02 CPU board delivers SIL3-certified control for AC 800M systems, with redundant Ethernet ports and a 24 V DC supply built for demanding environments.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The ABB PM857K02 is a SIL3-certified CPU board for the AC 800M controller family, operating on a 24 V DC (19.2-30 V DC) power supply. It combines a 96 MHz processor, 32 MB memory, and redundant Ethernet communication in a single module designed for mission-critical oil and gas control applications.
What makes this controller CPU board dependable in oil and gas service?
Field-proven reliability starts with the fundamentals. This CPU board carries ISA Secure certification and TÜV approval for SIL2 and SIL3 schemes when paired with an SM812 module and SIL-certified software. The operating temperature range of +5 to +55 °C (+41 to +131 °F) suits typical process control cabinets, while the corrosion protection rating of G3 per ISA 71.04 addresses the sulfur-rich atmospheres common in upstream and midstream facilities. Redundancy is supported for CPU, CEX-Bus, communication interfaces, and S800 I/O, so a single fault does not halt production.

Key technical specifications
- Power supply: 24 V DC (19.2-30 V DC)
- Power consumption: +24 V typ/max 210 / 360 mA
- Power dissipation: 5.1 W (8.6 W max)
- Operating temperature: +5 to +55 °C (+41 to +131 °F)
- Storage temperature: -40 to +70 °C (-40 to +158 °F)
- Processor: MPC866 at 96 MHz
- Memory: 32 MB, with 22.184 MB RAM available for application
- Ethernet channels: 2 (IEEE 802.3, 10 Mbit/s, RJ-45 female)
- Serial ports: 2 RS-232C (COM3 general, COM4 isolated for configuration tool)
- I/O capacity: Max 128 I/O signals
- Switchover time in redundant configuration: Max 10 ms
- Real-time clock stability: 100 ppm (approx. 1 h/year)
- Backup battery: Lithium, 3.6 V
- Protection class: IP20 according to EN 60529, IEC 529
- Dimensions: 119 mm width, 186 mm height, 135 mm depth
- Weight (including base): 2700 g (5.95 lbs)
How does this controller simplify maintenance and service?
From a maintenance engineer's perspective, serviceability is built in. The INIT push button and front-panel LED indicators allow quick status checks without opening the cabinet. The CompactFlash interface supports program and data transfer during maintenance windows. Because COM4 is opto-isolated and dedicated to a configuration tool, engineers can connect a laptop for diagnostics without disturbing the control network. The built-in backup battery maintains the real-time clock during power interruptions, reducing the need for clock resets after outages. For SIL-rated schemes, always follow the manufacturer's safety manual during inspection and configuration.

Integration with AC 800M and S800 I/O
this controller CPU board is configured with the 800xA control builder and supports S800 I/O High Integrity. Two RJ45 Ethernet ports (CN1, CN2) connect to the Control Network using MMS and IAC protocols, with a recommended 100 Mbit/s switched Ethernet backbone. The CEX-Bus supports up to 12 communication modules with a maximum supply current of 2.4 A. On the Modulebus, a single PM857 handles up to 96 I/O modules, while a redundant configuration supports 84. The Modulebus scan rate ranges from 0 to 100 ms, depending on the number of I/O modules connected. A short integration note: wiring into these networks may require an external gateway or connection module; confirm cables and gateways with PetroPartsOnline before commissioning.
Environmental and certification profile
The module carries CE marking, UL 61010-1 and UL 61010-2-201 electrical safety approvals, and hazardous location certification for cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X. Marine certificates from ABS, BV, and DNV-GL are listed, with LR and Lloyd pending. Relative humidity tolerance is 5 to 95 % non-condensing, and the module is rated for altitudes up to 2000 m per IEC/EN 61131-2. Emitted noise is below 55 dB (A), and vibration resistance meets the profiles stated in the datasheet.
Frequently Asked Questions
What power supply does the ABB PM857K02 require?
The ABB PM857K02 operates on 24 V DC with an input range of 19.2-30 V DC. Typical consumption is 210 mA at +24 V, with a maximum of 360 mA.
Is the PM857K02 certified for safety applications?
Yes, the ABB PM857K02 is TÜV certified for SIL2 and SIL3 when used with an SM812 module and SIL-certified software. It also holds ISA Secure certification and cULus Class 1, Zone 2 approval.
What is the operating temperature range of the PM857K02 CPU board?
The ABB PM857K02 operates from +5 to +55 °C (+41 to +131 °F) and can be stored from -40 to +70 °C (-40 to +158 °F).
How many I/O signals can the PM857K02 handle?
The ABB PM857K02 supports a maximum of 128 I/O signals in total. On the Modulebus, a single CPU manages up to 96 I/O modules, or 84 in a redundant configuration.
Where can I source PM857K02 PLC replacement parts?
PetroPartsOnline supplies the ABB PM857K02 CPU board and related PLC spare parts for oil and gas control systems. Contact us for application-specific selection guidance.
Why choose PetroPartsOnline for PLC spare parts?
PetroPartsOnline supplies rugged, field-proven automation components for oil and gas operations. This controller is a mission-critical CPU board, and our team provides application-specific selection guidance to match your existing AC 800M architecture. Contact PetroPartsOnline for parts suited to your application's requirements.
