+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

MR-J3BUS3M | Mitsubishi SSCNET III Fiber Optic Bus Cable 3 m

Introduction:

Mitsubishi MR-J3BUS3M is a 3-meter SSCNET III/H fiber optic bus cable for linking servo controllers to MR-J4-B amplifiers in mission-critical motion systems.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: Mitsubishi
Part Number: MR-J3BUS3M
Type: Specialized SSCNET III fiber optic bus cable
Condition: Subject to stock check
Shipping Port: Xiamen
Warranty: One year

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The Mitsubishi MR-J3BUS3M is a Specialized SSCNET III fiber optic bus cable for industrial control and automation applications.

What the Mitsubishi MR-J3BUS3M Fiber Optic Bus Cable Delivers

The Mitsubishi this unit is a specialized SSCNET III/H fiber optic bus cable that connects a servo controller to a servo amplifier. Its 3-meter length and servo controller connector plus amplifier connector support direct integration into MELSERVO MR-J3 motion architectures, particularly with the MR-J4-B servo amplifier.

Fiber optic construction isolates the communication link from electrical noise that copper cabling can pick up on drives and welding equipment. For oil and gas engineers, that isolation supports dependable signaling in cabinets where variable-frequency drives and contactors share space.

Figure 1: Front view of the Mitsubishi MR-J3BUS3M Specialized SSCNET III fiber optic bus cable showing its physical design and enclosure.

Key Specifications at a Glance

  • Product type: SSCNET III fiber optic bus cable
  • Product line: MELSERVO MR-J3
  • Part number: this unit
  • Cable length: 3 meters
  • Communication protocol: SSCNET III/H
  • Application: Servo controller to servo amplifier
  • Compatibility: MR-J4-B servo amplifier
  • Connector type: Servo controller connector + amplifier connector
  • Bending rating: Standard
  • Operating ambient temperature: 0 to 55°C
  • Storage ambient temperature: -20 to 75°C
  • Weight: 0.13 lbs (0.06 kg)

The operating temperature window of 0 to 55°C covers typical control cabinet conditions. Storage from -20 to 75°C allows spares to sit in unconditioned warehouses without degrading the cable assembly.

How This Fiber Optic Cable Compares with Alternative Bus Media

Motion bus cabling in servo systems generally falls into three groups: copper twisted-pair, standard fiber optic, and application-specific fiber assemblies such as this unit. The comparison below helps maintenance and project engineers judge where this cable fits.

  • Copper bus cable: Lower material cost, but susceptible to electromagnetic interference in drive-dense cabinets and limited by copper run characteristics.
  • Standard fiber optic cable: Immune to electrical noise, yet may lack the dedicated servo controller and amplifier connectors required for plug-in installation.
  • this unit fiber optic bus cable: SSCNET III/H protocol support, factory connectors for the servo controller and amplifier, and a 3-meter length suited to cabinet-internal routing.

Because this unit carries SSCNET III/H traffic between a servo controller and an MR-J4-B amplifier, it removes protocol translation from the link. That reduces potential failure points compared with adapting a generic fiber cable to servo connectors.

Figure 2: Technical layout and connection details for the Mitsubishi MR-J3BUS3M Specialized SSCNET III fiber optic bus cable.

Where this unit Fits in Oil and Gas Motion Systems

Servo-driven mechanisms appear across upstream and midstream operations, from valve actuation to pipe handling and pump control. In these settings, the cable linking controller and amplifier is mission-critical: a broken link stops the axis.

The 3-meter length suits cabinet-internal runs where the controller and amplifier sit in adjacent racks. Fiber optic transmission keeps command and feedback traffic clear of electrical noise generated by nearby drives and contactors. Meanwhile, the 0 to 55°C operating range matches the controlled environment of an instrument cabinet, and the 0.13 lbs (0.06 kg) weight keeps routing loads low.

For projects specifying MELSERVO MR-J3 hardware, this unit is a field-proven connection choice built for demanding environments. Engineers can also treat it as a drop-in link when replacing a damaged cable of the same length and connector configuration.

Installation and Handling Guidance

Route the cable along the path between controller and amplifier, respecting the standard bending rating. Avoid tight radius bends and sharp cabinet edges, which stress fiber inside the jacket. Keep the connectors clean and fully seated; contamination at the ferrule is a common cause of intermittent communication faults.

Because the assembly ships with servo controller and amplifier connectors, installation does not require field termination. Label both ends during commissioning to simplify later maintenance. Verify that the controller and amplifier are powered down before mating connectors, and follow the manufacturer's safety manual for the drive system.

Maintenance and Reliability Practices

Inspect the cable periodically for jacket abrasion, connector seating, and strain at cable ties. In vibration-prone skids, add slack loops and recheck tie tension during scheduled outages. Store spare cables within the -20 to 75°C storage range and keep connectors capped until use.

Keeping a spare this unit on hand shortens recovery time when a link fails, since the replacement restores SSCNET III/H communication without re-termination. Reliability you can depend on starts with planned spares and disciplined inspection.

Frequently Asked Questions

What is the Mitsubishi this unit?

The Mitsubishi this unit is a 3-meter SSCNET III/H fiber optic bus cable that connects a servo controller to a servo amplifier, with connectors for both ends.

Which amplifier is this unit compatible with?

The Mitsubishi this unit is specified for use with the MR-J4-B servo amplifier within MELSERVO MR-J3 systems.

What is the operating temperature range of this unit?

The Mitsubishi this unit operates from 0 to 55°C and can be stored from -20 to 75°C.

Does this unit require field termination?

No. The Mitsubishi this unit is supplied with a servo controller connector and an amplifier connector, so no field termination is needed.

How should spare this unit cables be stored?

Store the Mitsubishi this unit within -20 to 75°C, keep connectors capped, and avoid tight bends that could stress the fiber.

Contact PetroPartsOnline for parts suited to your application's requirements.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "MR-J3BUS3M | Mitsubishi SSCNET III Fiber Optic Bus Cable 3 m", "mpn": "MR-J3BUS3M", "sku": "MR-J3BUS3M", "brand": {"@type": "Brand", "name": "Mitsubishi"}, "description": "The Mitsubishi MR-J3BUS3M is a Specialized SSCNET III fiber optic bus cable for industrial control and automation applications. What the Mitsubishi MR-J3BUS3M Fiber Optic Bus Cable Delivers The Mitsubishi this unit is a specialized SSCNET III/H fiber optic bus cable that connects a servo controller to a servo amplifier. Its 3-meter length and servo controller connector plus amplifier connector support direct integration into MELSERVO MR-J3 motion architectures, particularly with the MR-J4-B serv", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/05/MR-J3BUS3M.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/05/MR-J3BUS3M_.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/05/MR-J3BUS3M_2.jpg"], "category": "Controllers & CPUs"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What is the Mitsubishi this unit?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi this unit is a 3-meter SSCNET III/H fiber optic bus cable that connects a servo controller to a servo amplifier, with connectors for both ends."}}, {"@type": "Question", "name": "Which amplifier is this unit compatible with?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi this unit is specified for use with the MR-J4-B servo amplifier within MELSERVO MR-J3 systems."}}, {"@type": "Question", "name": "What is the operating temperature range of this unit?", "acceptedAnswer": {"@type": "Answer", "text": "The Mitsubishi this unit operates from 0 to 55°C and can be stored from -20 to 75°C."}}, {"@type": "Question", "name": "Does this unit require field termination?", "acceptedAnswer": {"@type": "Answer", "text": "No. The Mitsubishi this unit is supplied with a servo controller connector and an amplifier connector, so no field termination is needed."}}, {"@type": "Question", "name": "How should spare this unit cables be stored?", "acceptedAnswer": {"@type": "Answer", "text": "Store the Mitsubishi this unit within -20 to 75°C, keep connectors capped, and avoid tight bends that could stress the fiber. Contact PetroPartsOnline for parts suited to your application's requirements."}}]}]}

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap