Product Overview
The Schneider Electric ABFM04S201 belongs to the Modicon Quantum accessory line. Specifically, it is a dedicated cabled connector for analogue output signals. Moreover, this cable assembly supports 4 channels for multiple analog connections. Furthermore, the device is specifically compatible with the 140ACO02000 analog output module.
Common applications for the ABFM04S201 include process control and factory automation systems. For instance, it connects Quantum PLC analog outputs to field actuators and instruments. As a result, the cable simplifies wiring between controllers and remote devices. Consequently, installation time is significantly reduced.
Technical Specifications
The Schneider Electric ABFM04S201 features a 2-meter (6.6 ft) cable length. Therefore, this provides ample reach for most cabinet installations. Additionally, the cable uses 24 AWG conductors with 0.22 mm² wire section. Finally, the connector type is a 25-way SUB-D male or female connector.
Key Electrical Parameters
Signal type: Analogue output only
Current rating: 1A maximum per conductor
Voltage rating: 250V maximum
Number of ways: 25 ways (positions)
Number of channels: 4 channels for analog signals
Physical and Material Specifications
Cable construction: Multi-conductor cable
Insulation material: PVC (Polyvinyl Chloride)
Electrical connection: 1 connector on cable end
Net weight: 0.45 kg (0.99 lbs)
Environmental Parameters
Operating temperature: -20°C to +60°C
Thus, this range suits most industrial environments
Moreover, PVC insulation maintains flexibility across the temperature range
Compatibility Information
The Schneider Electric ABFM04S201 is designed for specific compatibility:
Product line: Modicon Quantum
Compatible module: 140ACO02000 (4-channel analog output)
Additionally, the connector mates directly with the module’s SUB-D port
Therefore, always verify your module part number before ordering
Installation Guidelines
When installing the ABFM04S201, follow these important steps:
First, ensure the PLC and field devices are powered off
Next, align the SUB-D connector with the module port
Then, tighten the locking screws finger-tight only
Finally, route the 2m cable away from high-voltage lines
The ABFM04S201 requires no special tools for installation. Furthermore, the multi-conductor construction provides flexibility for tight spaces. As a result, always secure the cable using appropriate strain relief methods.
Packing List
Frequently Asked Questions (FAQ)
Q: Which modules are compatible with the ABFM04S201?
A: The ABFM04S201 is designed for the Modicon Quantum 140ACO02000 analog output module. Specifically, it provides 4 channels of analog output connectivity. Therefore, check your module’s user manual to confirm compatibility.
Q: Can the ABFM04S201 be used for digital signals?
A: No. The ABFM04S201 is designed specifically for analogue output signals. For instance, using it for digital signals may cause signal degradation. Consequently, always match the cable type to your signal requirements.
Q: What is the difference between ABFM04S201 and a standard SUB-D cable?
A: The ABFM04S201 is a pre-assembled, tested cable for Quantum systems. In contrast, standard SUB-D cables may not have the exact pinout configuration. Therefore, using non-Schneider cables risks damaging your analog output module.
Q: How many conductors are actually used for the 4 analog channels?
A: The ABFM04S201 uses the 25-way SUB-D connector for 4 channels. Specifically, each channel typically requires 2 to 3 conductors (signal plus common). As a result, the remaining ways are either unused or connected to shield.
Customer Reviews