IS200SRLYH2AAA | GE 12-Channel Relay Terminal Board



Introduction:
The GE IS200SRLYH2AAA is a Mark VIe simplex relay output terminal board with 12 form C channels, 125 V DC load rating, and -30 to 65°C operation.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
What Is the GE IS200SRLYH2AAA Simplex Relay Terminal Board?
The GE this relay is a simplex relay output terminal board from the Mark VIe series, built for GE distributed turbine control systems. It provides 12 form C relay output circuits across 48 customer terminals and operates from -30 to 65°C. Each relay uses an isolated contact pair to feed position feedback back to the I/O pack, so the control system always knows the true state of a field device.
This board is a field-proven interface between turbine control logic and high-energy actuation circuits. Its surface-mount construction and fixed box terminals make it a rugged choice for mission-critical oil and gas installations where dependable relay switching is non-negotiable.

Key Specifications and Relay Architecture
- Relay channels: 12 form C outputs, labeled K1 through K12 in three groups of four.
- Terminal block TB1: 48 terminals total, 24 on the top row and 24 on the bottom.
- Max load current: 125 V DC per the published rating.
- Operating temperature: -30 to 65°C for harsh cabinet environments.
- Board size: 15.9 cm high x 17.8 cm, matching other S-type terminal boards.
- Technology: Surface Mount components for repeatable assembly quality.
- Manual: GEH-6721D covers installation and terminal definitions.
- Country of origin: USA.
The 12 relay channels are the heart of this board. Each channel exposes a normally open (NO), normally closed (NC), and common (COM) contact, giving engineers full flexibility for fail-safe or fail-to-safe wiring. Because the relays are isolated, a fault on one channel does not cascade into the others. That isolation is a key reason the board is trusted in demanding environments where a single spurious trip can cost production.
How Does This Board Compare to Other Relay and Breaker Interface Options?
Engineers often weigh this relay against three alternatives when planning a circuit breaker panel replacement or a control cabinet upgrade:
- Discrete relay modules: A DIN-rail relay module offers fewer channels per footprint and usually lacks the integrated feedback path. The SRLY board packs 12 isolated form C relays into a single S-type carrier.
- Breaker control panels with hard-wired relays: Traditional industrial circuit breaker replacement projects often use individual ice-cube relays. The SRLY board replaces that wiring with pluggable Euro-style box terminals and a defined NO/NC/COM layout.
- Higher-density I/O packs: Some Mark VIe packs combine relay and analog functions, but the SRLY remains the dedicated relay output terminal board for simplex applications.
For an MCCB replacement or industrial circuit breaker replacement project, the comparison usually comes down to channel count, feedback capability, and cabinet space. The SRLY board wins on all three when the control system is GE Mark VIe.

Installation and Integration Notes
The SRLY board and a plastic insulator mount to a sheet metal carrier, which is then secured to the cabinet with screws. An option board, if used, plugs into the SRLYH2AAA and is held by connector force. The terminal block TB1 uses pluggable Euro-style box terminals, and the board includes two connectors that support various option boards. On this revision, option board connectors JW1 and JW2 are absent and replaced by fixed box terminals.
For all customer screw and JW1 circuits, the board is intended to support a current rating of 5 A and a voltage clearance greater than that required for 250 V AC. The limiting factor for each application is the relay rating. No jumpers are used on the SRLY terminal board itself; relay power is controlled by six jumpers on the WROBH1 option board when that board is fitted.
Integration note: when wiring relay outputs into a plant network or DCS, confirm cable schedules and any gateway or connection module requirements with PetroPartsOnline before commissioning.
Applications in Oil and Gas Turbine Control
this relay is designed for GE distributed turbine control systems, including gas and steam turbine management. Typical uses include tripping and permissive circuits, alarm annunciation, and breaker control interfaces. In oil and gas plants, the board often sits between the control system and motor control centers, where reliable relay switching protects pumps, compressors, and auxiliary systems. Because the board operates from -30 to 65°C, it suits cabinets in both hot process areas and cold-climate installations. The isolated contact pairs also simplify troubleshooting during planned outages.
Maintenance and Reliability Guidance
Inspect terminal block TB1 periodically for loose screws or discoloration, and verify that relay contacts are not welded. Keep cabinet filters clean to maintain airflow across the surface-mount components. Because the board is a legacy Mark VIe item, confirm spare-unit availability before extended maintenance windows. Reliability you can depend on starts with a clean, cool cabinet and a documented inspection routine.
Frequently Asked Questions
What is this relay used for?
The GE this relay is a simplex relay output terminal board for Mark VIe distributed turbine control systems. It provides 12 form C relay channels across 48 customer terminals for tripping, alarm, and breaker control circuits.
How many relay channels does this relay provide?
The GE this relay provides 12 relay channels, labeled K1 through K12 and arranged in three groups of four. Each channel offers NO, NC, and COM contacts on terminal block TB1.
What is the operating temperature range of this relay?
The GE this relay operates from -30 to 65°C, making it suitable for turbine control cabinets in a range of plant environments.
Does this relay support circuit breaker panel replacement projects?
The GE this relay can serve as the relay interface in a circuit breaker panel replacement when the control system is GE Mark VIe. Its 12 isolated form C contacts and 125 V DC load rating suit breaker control and feedback circuits.
What documentation is available for this relay?
GE manual GEH-6721D covers this relay terminal definitions and installation. Contact PetroPartsOnline for parts suited to your application's requirements.
