IC755ACC10MNT Accessory Kit for 10-Inch QuickPanel+ HMI Mounting

This IC755ACC10MNT kit includes essential mounting and connection accessories. The IC755ACC10MNT is designed by GE Fanuc for QuickPanel+ operator interface terminals. It specifically works with units that have 10-inch screens. This kit provides the necessary parts for proper surface mounting. These accessories enable proper connections on the QuickPanel operator interface terminals.

Technical Specifications

The IC755ACC10MNT comes with three main accessory components. Each component serves a specific mounting or connection purpose. The kit includes one set of replacement mounting clips. It also includes one power connector and one serial port connector.

Kit Contents:

• Mounting Clips: Replacement clips for panel mounting

• Power Connector: 24 VDC input, 3-pin type

• Serial Connector: Tyco Electronic 284539-3 type

• Interface: RS-232 compatible

Power Connector Specifications:

• Voltage: 24 VDC input

• Connector Type: 3-pin power connector

• Wire Gauge: 30 to 14 AWG

• Temperature Rating: 75 degrees Celsius

• Compatibility: USB keyboard and mouse

Serial Connector Specifications:

• Part Number: Tyco Electronics 1-284539-0 (cable)

• Mating Connector: Tyco Electronics 1-284510-0

• Pin Count: 5-pin connector

• Port Destination: COM1 on the operator interface

Environmental Requirements:

• Operating Temperature: 0 to 50 degrees Celsius

• Relative Humidity: Below 80%

The IC755ACC10MNT includes only one set of each accessory. All accessories are necessary for mounting any operator interface. They are also necessary for ensuring correct use of the device. The power connector cable connects the operator interface to its power supply.

Installation Guide

Follow these steps to install the IC755ACC10MNT accessories properly. Place the gasket on the panel mounting surface. Use the mounting clips to secure the operator interface. Attach the clips to the gasket and panel surface. Connect the 24 VDC power connector to the interface. Use 30 to 14 AWG wire for the power connection. Ensure the cable temperature rating stays below 75 degrees Celsius. Connect the serial port cable to the COM1 port. Use the Tyco Electronics 1-284539-0 cable for RS-232 communication. Mate the cable with the Tyco Electronics 1-284510-0 connector. Verify all connections are secure before powering on. Keep the operating temperature below 50 degrees Celsius. Maintain relative humidity below 80 percent.

What’s in the Box

Please check the package contents upon delivery.

• IC755ACC10MNT Accessory Kit (1 box)

• Mounting clips (1 set)

• 24 VDC 3-pin power connector (1 piece)

• RS-232 serial connector with cable (1 piece)

• Installation instruction sheet (1 piece)

Common FAQs

1. Which QuickPanel models work with the IC755ACC10MNT kit?
This accessory kit is designed for QuickPanel+ operator interface terminals. It specifically works with units that have 10-inch screens.

2. What connectors are included in this accessory kit?
The IC755ACC10MNT includes a 24 VDC 3-pin power connector. It also includes an RS-232 serial connector with Tyco Electronics 1-284539-0 cable and 1-284510-0 mating connector.

3. Does this kit include multiple sets of mounting clips?
No, this kit includes only one set of mounting clips. It also includes one power connector and one serial port connector per kit.

4. What wire gauge works with the power connector?
The power connector accepts 30 to 14 AWG wire. The cable is rated for 75 degrees Celsius maximum temperature.

5. What environmental conditions does this kit support?
The IC755ACC10MNT operates in temperatures from 0 to 50 degrees Celsius. Relative humidity must stay below 80 percent for proper operation.