Technical Specifications of Bently Nevada 330106-05-30-30-12-00

The Bently Nevada 330106-05-30-30-12-00 belongs to the proven 3300 XL series.
This probe uses an 8 mm reverse mount design for tight machinery spaces.
The probe tip material is Polyphenylene sulfide (PPS).
The probe case uses AISI 303 or 304 stainless steel.
Nominal DC resistance for this 3.0 meter probe is 8.17 ± 0.50 Ω.
The total length option is 3.0 meters (9.8 feet).
Connector option is Miniature ClickLoc coaxial with FluidLoc cable (12).
Agency approval is not required (00) for this configuration.
Thread size is M10x1 with maximum engagement of 15 mm.
Probe weight is 323 g per meter (11.4 oz per meter).

Environmental and Mechanical Ratings

The standard probe operates from -52°C to +177°C (-62°F to +350°F).
Extended range probe tip works up to +218°C (+425°F).
Extended cable and connector handle -51°C to +260°C (-60°F to +500°F).
Do not expose this probe below -34°C (-30°F) to protect the pressure seal.
The probe uses a Viton® O-ring for differential pressure sealing.
Humidity testing shows less than 3% change in Average Scale Factor (ASF).
This test follows IEC standard 68-2-3 for up to 56 days at 93% humidity.
Maximum tensile strength is 330 N (75 lbf) from case to lead.
Connector tensile strength is 270 N (60 lbf) between probe and extension cables.
Connector materials are gold-plated brass or gold-plated beryllium copper.

Cable and FluidLoc Information

The 330106-05-30-30-12-00 includes the FluidLoc cable option.
This option is not needed for most standard probe sleeve installations.
Only order FluidLoc when fluids may enter the cable assembly regularly.
Standard cable uses 75Ω triaxial FEP insulation.
Extended range cable uses 75Ω triaxial PFA insulation.
Available total probe lengths include 0.5, 1, 1.5, 2, 3, 5, or 9 meters.
Optional armor uses flexible AISI 302 or 304 SST with FEP jacket.

DC Resistance by Length

This 3.0 meter probe has higher resistance than the 1.0 meter version.
The 330106-05-30-30-12-00 measures 8.17 Ω compared to 7.59 Ω for 1.0m.
Always check your system's acceptable resistance range before ordering.
Longer cables provide more installation flexibility but increase resistance.

Installation Guidelines

Handle the 330106-05-30-30-12-00 by its case, not the cable.
Use a proper torque wrench for the M10x1 threads.
Do not exceed 15 mm thread engagement depth.
Keep the probe tip clean and free from debris.
Avoid bending the cable beyond its minimum bend radius.
Secure the Miniature ClickLoc connector firmly.
Check that the target surface is smooth and conductive.
Leave adequate space for the reverse mount orientation.
Route the 3.0 meter cable away from heat sources and moving parts.

Packaging List for Bently Nevada 330106-05-30-30-12-00

One Bently Nevada 330106-05-30-30-12-00 probe assembly

Attached 3.0 meter triaxial cable with FluidLoc feature

Miniature ClickLoc coaxial connector pre-installed

Protective plastic cap for the probe tip

Anti-static bag for safe transportation

Printed installation instruction sheet

Frequently Asked Questions (FAQ)

1. What is the main advantage of the 330106-05-30-30-12-00 over shorter probes?

The 3.0 meter length gives you more reach for remote monitoring locations. You can place the probe further from your monitoring equipment.

2. Do I really need the FluidLoc cable on this probe?

Most installations do not require FluidLoc due to the probe sleeve. Only order it when fluids may enter the cable assembly regularly.

3. Can I use the 330106-05-30-30-12-00 with existing 3300 XL monitors?

Yes, it fully matches all 3300 XL series monitors and proximity systems. The 8.17 Ω resistance falls within the standard operating range.

4. What is the maximum cable length available for this probe series?

This series offers total probe lengths up to 9 meters. Standard and extended temperature cables are both available.

5. Does this probe work in high humidity environments?

Yes, it passes the 93% humidity test per IEC 68-2-3. The sealed tip and gold-plated connector resist moisture well.

Why Choose This Bently Nevada 330106-05-30-30-12-00?

You get reliable performance with a longer 3.0 meter cable length.
The reverse mount design saves valuable space inside machinery.
PPS tip material offers excellent chemical and wear resistance.
Stainless steel case provides long life in harsh industrial environments.
The FluidLoc option adds protection against fluid ingress.
Longer cable gives you more flexibility in equipment layout.
Low DC resistance keeps signal quality stable over 3.0 meters.

Ordering and Shipping Information

This product ships from our warehouse within 24 to 48 hours.
We use FedEx, UPS, and DHL for fast international delivery.
The 330106-05-30-30-12-00 comes in original anti-static packaging.
No certificate or warranty document is included in the package.
Contact our sales team for bulk order discounts and lead times.