Technical Specifications – Tree View

• Inputs & Signal
  • Accepts 1 to 4 proximity transducer signals.
  • Input impedance: 10 kΩ (standard I/O).
  • Power consumption: 7.7 watts typical.
• Sensitivity Options (per channel)
  • Radial Vibration: 3.94 or 7.87 mV/µm.
  • Thrust: 3.94 or 7.87 mV/µm.
  • Eccentricity: 3.94 or 7.87 mV/µm.
  • Differential Expansion: 0.394 or 0.787 mV/µm.
  • REBAM: 40 or 80 mV/µm.
• Frequency Response
  • Direct filter: user-programmable, 4-4000 Hz or 1-600 Hz (-3 dB).
  • Gap filter: -3 dB at 0.09 Hz (radial).
  • Thrust direct filter: -3 dB at 1.2 Hz.
  • Eccentricity direct filter: -3 dB at 15.6 Hz.
  • Not 1X filter: 60 cpm to 15.8x running speed.
  • Smax: 0.125 to 15.8x running speed.
  • 1X and 2X vector filters with constant Q design.
• Accuracy & Linearity
  • Direct and Gap: ±0.33% of full scale typical (±1% max).
  • 1X and 2X: ±0.33% typical (±1% max).
  • Smax: within ±5% maximum.
  • Not 1X: ±3% below 30,000 cpm, ±8.5% above 30,000 cpm.
  • Thrust & Differential Expansion: ±0.33% typical.
  • Eccentricity: ±0.33% typical.
• Outputs & Indicators
  • OK LED: module operates correctly.
  • TX/RX LED: module communicates with other rack modules.
  • Bypass LED: module is in bypass mode.
  • Buffered transducer outputs: coaxial connectors per channel.
  • Output impedance: 550 Ω, short-circuit protected.
  • Transducer power supply: -24 Vdc.
• Physical Dimensions & Weight
  • Main board: 241.3 x 24.4 x 241.8 mm (HxWxD), 0.91 kg.
  • I/O module (non-barrier): 241.3 x 24.4 x 99.1 mm, 0.20 kg.
  • I/O module (barrier): 241.3 x 24.4 x 163.1 mm, 0.46 kg.
  • Requires 1 full-height front slot for monitor.
  • Requires 1 full-height rear slot for I/O module.
• Environmental & Approvals
  • Agency approval option: 00 = none.
  • Operates in standard industrial environments.
  • No hazardous area certification on this version.

Installation Guide

• Install the monitor module in any full-height front slot.
• Install the matching I/O module in the rear slot behind it.
• Use 3500/40M-01-00 with 3500 series racks only.
• Connect proximity probes to the I/O module terminals.
• Set sensitivity and filter options via 3500 configuration software.
• Verify firmware compatibility before installation.

Package Contents (No certificates, no warranty, no shipping info)

• 1 x 3500/40M-01-00 monitor module (main board)
• 1 x Proximitor I/O module type 01 (internal terminations)
• No transducers or coaxial cables included

Common FAQs – Practical Answers

• Can the 3500/40M-01-00 measure velocity or acceleration?No. This monitor accepts proximity transducer signals only.
• What is the difference between direct and gap filter?Direct filter measures vibration. Gap filter measures probe gap voltage.
• Does this module work with the 3500/20 rack?Yes, the 3500/40M series works with standard 3500 racks.
• How do I select 100 mV/mil or 200 mV/mil sensitivity?Choose 200 mV/mil for small vibrations. Choose 100 mV/mil for larger amplitudes.
• What software do I need to configure the 3500/40M-01-00?You need 3500 configuration software version 4.20 or later.