IS215UCVGM06A | GE Mark VI UCV Controller Board 0-70°C



Introduction:
The IS215UCVGM06A is a GE Mark VI UCV Controller Board with an Intel Celeron 650 MHz processor, 128 MB SDRAM, and QNX OS for turbine control in rugged environments.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
What the IS215UCVGM06A Controller Board Delivers
The GE this controller is a Universal Control Variable Generator Module for the Mark VI Speedtronic series. It pairs an Intel Ultra Low Voltage Celeron 650 MHz processor with 128 MB SDRAM and runs the QNX real-time operating system. From a maintenance standpoint, this single-slot board is the computational core of the turbine control module, executing application code while communicating with I/O boards over the VME bus. Its field-proven design supports steam, gas, and aero-derivative turbine applications where reliability is mission-critical.

Key Specifications for Maintenance Planning
- Operating temperature: 0 to 70 Deg C — plan cabinet cooling accordingly.
- Input voltage range: 14 to 32 V dc — verify supply stability at the rack.
- Processor: Intel Ultra Low Voltage Celeron 650 MHz.
- Memory: 128 MB SDRAM.
- Operating system: QNX real-time, multi-tasking OS.
- Primary Ethernet interface: Twisted pair 10BaseT/100BaseTX.
- Maximum lead resistance: 15 Ohm.
- Programming: Boolean.
- Size: 16.2 cm high x 8.6 cm.
- Manual: GEH-6421J.
These parameters directly affect service intervals. The 0 to 70 Deg C window means ambient temperature inside the control cabinet must stay within that band; exceeding it can accelerate component wear. Similarly, the 14 to 32 V dc input range sets the tolerance for the station power supply. During routine inspections, confirm both values with a calibrated meter. The board's 16.2 cm by 8.6 cm footprint and single-slot design simplify physical replacement when needed.
Installation and Commissioning Notes
this controller mounts in a Mark VI control module alongside a VCMI communication board. Three rack types are available: the GE Fanuc integrator's rack and two sizes of Mark VI racks. The GE Fanuc rack suits stand-alone modules with remote I/O only, while longer Mark VI racks support both local and remote I/O. Regardless of rack type, a cooling fan is installed above or below the controller. For a stand-alone control module using the GE Fanuc rack, a VDSK board is also required to power the fan and provide rack identification via an ID plug. Before applying power, verify the input voltage is within the 14 to 32 V dc range and that the fan is operational. The front faceplate provides monitor, keyboard/mouse, Ethernet, and USB ports, plus a reset switch and four LED indicators. Use the LEDs for initial power-on checks and the reset switch only as directed in the manual.

Reliability and Maintenance Best Practices
Field experience shows that most controller issues stem from power or environmental factors rather than the board itself. Therefore, schedule periodic checks of the 14 to 32 V dc supply and the cabinet cooling system. Keep the operating temperature within 0 to 70 Deg C; a clogged filter or failed fan can push the board beyond this range. This controller includes a type 1 Lithium battery on the board; replace it only with an equivalent battery type to avoid damage. Because the board uses surface-mount technology, visual inspection for discoloration or loose connectors is a practical first step during maintenance. For persistent faults, the 3-7 day repair service offers a dependable path to restore operation without replacing the entire module.
Integration with Mark VI Systems
this controller communicates with I/O boards via the VME bus and with the UDH through its first Ethernet port. The second Ethernet port is designed for a separate IP subnet and can be used for Modbus or private EGD networks. Configuration of this second port is done through the toolbox, which validates settings against the hardware each time the rack is powered on. This dual-port arrangement allows engineers to separate control network traffic from configuration and peer-to-peer communications, enhancing reliability. When integrating the board into an existing Mark VI system, confirm that the VCMI communication board is present and that the rack type matches the I/O requirements. The manual GEH-6421J provides detailed wiring and setup instructions.
Frequently Asked Questions
What is the operating temperature range of this controller?
The GE this controller operates within 0 to 70 Deg C. Maintain cabinet cooling to keep the board within this range for dependable performance.
What input voltage does this controller require?
The GE this controller accepts a voltage range of 14 to 32 V dc. Verify your station supply stays within this window to avoid unnecessary faults.
Can I use this controller as a plc cpu module replacement?
The GE this controller is a UCV controller board for Mark VI systems, not a general-purpose PLC CPU. For turbine control applications, it serves as the central processor; consult PetroPartsOnline for application-specific guidance.
What is the repair turnaround for this controller?
The GE this controller is available with a 3-7 day repair service. This helps minimize downtime for mission-critical turbine control systems.
What manual covers this controller?
The GE this controller is documented in manual GEH-6421J. Refer to it for installation, configuration, and troubleshooting details.
Contact PetroPartsOnline for parts suited to your application's requirements.
