Technical Specifications

The Honeywell FC-QPP-0002 delivers four processing channels in one compact module. Its robust electrical design supports demanding automation tasks.

Temperature Ranges & Environmental Tolerance
The Honeywell FC-QPP-0002 operates from -5°C to +70°C for both outside and inside module temperatures. Storage temperature ranges from -40°C to +85°C. Relative humidity tolerance spans 10% to 95% non-condensing. This wide envelope suits harsh industrial facilities.

Supply Voltage & Current Requirements
This quad processor needs a 24 Vdc supply at -15% to +30% tolerance. The FC-QPP-0002 draws a maximum 25 mA from the 24V supply. It also requires a 5 Vdc supply at ±5% tolerance. The 5V supply current reaches a maximum 1.2 Amps.

Output Specifications & Protection
The Honeywell FC-QPP-0002 provides output supply voltage from 15 to 31 Vdc. Output resistance measures approximately 1.1 kΩ. Each output delivers 750 mA continuously. The module features continuous short circuit proof protection. This prevents damage from wiring mistakes.

Input & Signal Characteristics
For input signals, voltage high ranges from 15 to 32 Vdc. Voltage low sits below 4 V with reverse polarity protection. Input current measures approximately 8 mA at 24 Vdc. The FC-QPP-0002 accepts standard industrial logic levels.

Physical Dimensions & Weight
This module measures 176 mm in height, 88.5 mm in width, and 212 mm in depth. Total weight reaches 1.3 kg. The Honeywell FC-QPP-0002 fits standard Honeywell rack systems.

Certifications & Approvals
The FC-QPP-0002 holds multiple global approvals. These include CE, UL, CSA, TUV, and FM. These certifications guarantee compliance with international safety standards.

Installation Guide

Follow these steps to install the Honeywell FC-QPP-0002 correctly:

1. Power Down System: Turn off all power to the chassis first.

2. Check Slot Compatibility: Verify the slot accepts a quad processor module.

3. Align Module: Insert the FC-QPP-0002 straight into the guide rails.

4. Seat Firmly: Press the module until the locking mechanism clicks.

5. Secure Mounting: Tighten the top and bottom retaining screws.

6. Connect 24V Supply: Wire the 24 Vdc and 5 Vdc power sources.

7. Connect Outputs: Wire each output channel to its load device.

8. Restore Power: Apply power and check the status indicators.

Package List

Your shipment includes the following physical items:

• 1 x Honeywell FC-QPP-0002 Quad Processor Module

• 1 x Product installation and wiring guide

• 4 x Terminal block connectors for I/O wiring

• 2 x Mounting screws with captive washers

Frequently Asked Questions (FAQ)

Q1: Does the FC-QPP-0002 require both 24V and 5V supplies?
Yes, the Honeywell FC-QPP-0002 needs both supplies. The 24V powers the outputs. The 5V powers the internal processor logic.

Q2: What happens if an output shorts to ground?
The FC-QPP-0002 has continuous short circuit protection. The output will not suffer damage. Remove the short and the output resumes normal operation.

Q3: Can I use this quad processor in a safety system?
The Honeywell FC-QPP-0002 holds TUV and FM approvals. Check your specific safety application requirements. Consult the product manual for safety ratings.

Q4: How do I know if the module is overheating?
The FC-QPP-0002 operates up to 70°C internal temperature. Above this range, the processor may slow down or shut down. Ensure proper cabinet ventilation.

Q5: What is the maximum cable length for outputs?
Keep output wiring under 30 meters for the Honeywell FC-QPP-0002. Longer runs may cause voltage drop. Use larger gauge wire for long distances.