Product Overview

The Honeywell 2MLP-ACF1 is a reliable power module for the MasterLogic-200 series. It converts AC 100V~240V input into stable DC outputs. This unit delivers DC 5V at 3A and DC 24V at 0.6A. You can use it for PLC systems and industrial controllers. The Honeywell 2MLP-ACF1 ensures your logic circuits run without interruption.

Series: MasterLogic-200 Series
Product Type: Power Module
Product Category: Power Supplies
Current Price (RMB): ¥1,850
Gross Weight: 0.4 kg

Technical Specifications

The Honeywell 2MLP-ACF1 provides clean and regulated power. Its parameters suit demanding factory automation environments.

Input Specifications

• Rated Input Voltage: AC 100V – AC 240V

• Input Voltage Range: AC 85V ~ AC 264V

• Input Frequency: 50 / 60 Hz (47 ~ 63 Hz)

• Efficiency: 65% or more

• Input Fuse: Built-in (user cannot change), UL standard Slow Blow Type

• Allowed Instantaneous Interruption: 10 ms and shorter

Output 1 Specifications (5V)

• Output 1 Voltage: DC 5V (±2%)

• Output 1 Current: 3.0A

• Output 1 Over Current Protect: 3.2A or more

• Output 1 Over Voltage Protect: 5.5V ~ 6.5V

Output 2 Specifications (24V)

• Output 2 Voltage: DC 24V (±10%)

• Output 2 Current: 0.6A

• Output 2 Over Current Protect: 0.7A or more

• Output 2 Over Voltage Protect: None

Application RUN Contact

• Voltage: DC 24V

• Current: 0.5A

• Rated Switching Voltage/Current: As per specification

• Minimum Switching Load: DC 5V, 1 mA

Response & Protection

• Response Time OFF→ON: 10 ms or less

• Response Time ON→OFF: 12 ms or less

• Output Voltage Indicator: LED ON when normal

Mechanical & Electrical Life

• Mechanical Life: 20 million times or more

• Electrical Life (Rated Switching Current): 100,000 times or more

Connection & Dimensions

• Cable Specification: 0.75 ~ 2 mm²

• Compressed Terminal: RAV 1.25 - 3.5 or RAV 2 - 3.5

• Weight: 0.4 kg

Key Features & Benefits

The Honeywell 2MLP-ACF1 includes a built-in input fuse for safety. You get over current protection on both output channels. The 5V output has over voltage protection between 5.5V and 6.5V. A green LED shows normal output voltage status. This power module tolerates a 10 ms power interruption. The 2MLP-ACF1 supports a wide input range from 85V to 264V AC.

Installation Guide

Follow these steps to install the Honeywell 2MLP-ACF1 correctly.

1. Mount the module inside a MasterLogic-200 series rack.

2. Connect AC power using 0.75 to 2 mm² copper wire.

3. Use compressed terminals type RAV 1.25-3.5 or RAV 2-3.5 only.

4. Apply AC 100V to 240V to the input terminals.

5. Check the voltage indicator LED turns green after power-up.

6. Do not replace the input fuse as it is built-in and non-serviceable.

Package List

• 1 x Honeywell 2MLP-ACF1 power module

• 1 x Terminal connection label

• 2 x Mounting screws for rack installation

Frequently Asked Questions (FAQ)

Q1: What is the maximum output current for the 5V rail on the 2MLP-ACF1?
A1: The 2MLP-ACF1 provides 3.0A continuous on the DC 5V output. Over current protection activates at 3.2A or more.

Q2: Can the Honeywell 2MLP-ACF1 run on 110V AC input?
A2: Yes, the Honeywell 2MLP-ACF1 accepts any input from 85V AC to 264V AC. It works on 110V, 120V, 220V, and 240V systems.

Q3: What happens during a short power loss on this power module?
A3: The 2MLP-ACF1 tolerates an instantaneous interruption up to 10 ms. Your PLC system continues normal operation during this short loss.

Q4: How do I know the 5V output is working correctly?
A4: The voltage indicator LED turns green when the 5V output is normal. No LED means no output voltage or a fault condition.

Q5: What is the mechanical life of the RUN contact on the 2MLP-ACF1?
A5: The RUN contact on the Honeywell 2MLP-ACF1 has a mechanical life of 20 million operations. Electrical life is 100,000 operations at rated load.