FE7100WE | Flexem 10.1" 1024×600 Resistive HMI Panel



Introduction:
The FE7100WE is a 10.1-inch 16:9 resistive-touch HMI panel from Flexem with 1024×600 resolution, a built-in Ethernet port, and a 9–28V DC input range.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
Flexem FE7100WE is a 10.1-inch 16:9 resistive-touch HMI panel with 1024×600 resolution and one built-in Ethernet port. It belongs to the FE7000 Series and is built for panel-mount installation in industrial control cabinets.
Control rooms have changed. Operators once read gauges and logged values by hand; today they expect a clear screen, a dependable touch surface, and a controller that keeps working when the plant floor does not cooperate. This unit answers that shift with a 10.1-inch TFT LCD that delivers 1024×600 resolution, 24-bit color, and 400 cd/m² brightness. A 4-wire resistive touchscreen responds to a gloved finger or a stylus, which matters on a busy skid or a packaging line where hands are rarely clean.
What makes this unit suited to oil and gas control cabinets?
This HMI is engineered for harsh oil and gas environments, where temperature swings, electrical noise, and continuous duty are normal. The operating temperature range is 0 to 50 °C, and the unit tolerates storage from -20 to 60 °C. Relative humidity of 10 to 90 %RH (non-condensing) covers most sheltered cabinet conditions. The front carries an IP65 rating (NEMA panel) while the rear is IP20, so the panel face resists dust and water spray when properly mounted. Natural convection cooling keeps the design simple, with no fan to clog or replace.

Electrical specifications: input voltage, power supply, and protection
Power stability is mission-critical in remote installations. This unit accepts a DC 24V nominal supply with an operating range of DC 9–28V, which gives integrators headroom for supply sag or long cable runs. Maximum power consumption is under 10W, and the unit tolerates power interruptions shorter than 5 ms. Lightning surge protection is built in, and the EMC profile includes EN61000-6-2:2019 and EN61000-6-4:2019, RoHS, lightning surge ±1 kV, group pulse ±2 kV, electrostatic contact 4 kV, and air discharge 8 kV. These ratings support dependable operation near contactors, drives, and other noisy loads.
Key features and technical specifications
- Display: 10.1" 16:9 TFT LCD with 1024×600 resolution and 24-bit color.
- Brightness: 400 cd/m² with LED backlight and 85° viewing angles on all sides.
- Touch panel: 4-wire resistive touchscreen for gloved or stylus input.
- Processor: 1 GHz dual-core Cortex-A7 CPU.
- Memory: 128 MB DDR3 plus 256 MB Flash; SD card slot not supported.
- Real-time clock: Built-in; Bluetooth not supported.
- Ports: 1×RJ45 (10/100 Mbps auto-adaptive), 1×USB Type-C OTG, 1×USB Type-A, COM1 (RS232/RS485/RS422), COM2 (RS485), COM3 (RS232).
- LCD lifetime: 50,000 hours.
- Dimensions: 213×273×36 mm; panel cutout 260×202 mm; weight approximately 0.92 kg.
- Enclosure: Engineering plastic, light gray, panel mount.

How does this unit integrate with existing control systems?
The built-in RJ45 port supports 10/100 Mbps auto-adaptive Ethernet, and the serial ports cover RS232, RS485, and RS422 on COM1, RS485 on COM2, and RS232 on COM3. Programming is handled through FStudio software. Protocols are not published in the official datasheet, so confirm the required driver or gateway with the supplier before commissioning. Communication expansion is not available on this model. When wiring into a plant network, an external gateway or connection module may be required; confirm cable and gateway compatibility with PetroPartsOnline.
Installation and maintenance guidance
Mount the unit in a panel cutout of 260×202 mm using the panel-mount hardware. Ensure adequate clearance for natural convection cooling, and avoid high-UV environments because the display is not rated for direct sunlight exposure. During routine inspections, check the front gasket seal, verify supply voltage remains within the DC 9–28V range, and clean the resistive touch surface according to plant procedures. The LED backlight is rated for 50,000 hours, so plan display replacement intervals around that figure. For safety-rated processes, follow the manufacturer's safety manual and inspect periodically.
Why specify this unit for mission-critical operations?
Reliable sourcing matters when a panel fails and production waits. This unit is part of the current Flexem FE7000 series product line, with the official product page active as of 2026-09. Its combination of a readable 10.1-inch screen, wide DC input range, and surge-protected power input makes it a field-proven choice for pump stations, compressor skids, and water treatment cabinets. Contact PetroPartsOnline for parts suited to your application's requirements.
Frequently Asked Questions
What is the operating temperature range of the FE7100WE?
The Flexem FE7100WE operates from 0 to 50 °C and can be stored from -20 to 60 °C. Relative humidity should stay between 10 and 90 %RH non-condensing.
What input voltage does the FE7100WE require?
The Flexem FE7100WE accepts a DC 24V nominal supply with an operating range of DC 9–28V. Maximum power consumption is under 10W, and the unit tolerates power interruptions shorter than 5 ms.
Does the FE7100WE support Ethernet communication?
Yes, the Flexem FE7100WE includes one RJ45 port rated for 10/100 Mbps auto-adaptive Ethernet. Protocols are not published in the official datasheet, so confirm driver compatibility with the supplier.
Is the FE7100WE protected against electrical surges?
The Flexem FE7100WE includes lightning surge protection and meets EN61000-6-2:2019 and EN61000-6-4:2019. Its EMC profile covers lightning surge ±1 kV, group pulse ±2 kV, contact discharge 4 kV, and air discharge 8 kV.
What are the panel cutout dimensions for the FE7100WE?
The Flexem FE7100WE requires a panel cutout of 260×202 mm. The unit measures 213×273×36 mm and weighs approximately 0.92 kg.
{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "FE7100WE | Flexem 10.1" 1024×600 Resistive HMI Panel", "mpn": "FE7100WE", "sku": "FE7100WE", "brand": {"@type": "Brand", "name": "Flexem"}, "description": "Flexem FE7100WE is a 10.1-inch 16:9 resistive-touch HMI panel with 1024×600 resolution and one built-in Ethernet port. It belongs to the FE7000 Series and is built for panel-mount installation in industrial control cabinets. Control rooms have changed. Operators once read gauges and logged values by hand; today they expect a clear screen, a dependable touch surface, and a controller that keeps working when the plant floor does not cooperate. This unit answers that shift with a 10.1-inch TFT LCD ", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1793939650-FE7100WE_1__fpe0ae3ac5.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793939656-FE7100WE_2__fp019d162e.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793939661-FE7100WE_3__fp53320db7.jpg"], "category": "HMI & Operator Interface"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What is the operating temperature range of the FE7100WE?", "acceptedAnswer": {"@type": "Answer", "text": "The Flexem FE7100WE operates from 0 to 50 °C and can be stored from -20 to 60 °C. Relative humidity should stay between 10 and 90 %RH non-condensing."}}, {"@type": "Question", "name": "What input voltage does the FE7100WE require?", "acceptedAnswer": {"@type": "Answer", "text": "The Flexem FE7100WE accepts a DC 24V nominal supply with an operating range of DC 9–28V. Maximum power consumption is under 10W, and the unit tolerates power interruptions shorter than 5 ms."}}, {"@type": "Question", "name": "Does the FE7100WE support Ethernet communication?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, the Flexem FE7100WE includes one RJ45 port rated for 10/100 Mbps auto-adaptive Ethernet. Protocols are not published in the official datasheet, so confirm driver compatibility with the supplier."}}, {"@type": "Question", "name": "Is the FE7100WE protected against electrical surges?", "acceptedAnswer": {"@type": "Answer", "text": "The Flexem FE7100WE includes lightning surge protection and meets EN61000-6-2:2019 and EN61000-6-4:2019. Its EMC profile covers lightning surge ±1 kV, group pulse ±2 kV, contact discharge 4 kV, and air discharge 8 kV."}}, {"@type": "Question", "name": "What are the panel cutout dimensions for the FE7100WE?", "acceptedAnswer": {"@type": "Answer", "text": "The Flexem FE7100WE requires a panel cutout of 260×202 mm. The unit measures 213×273×36 mm and weighs approximately 0.92 kg."}}]}]}
