Product Overview of Bently Nevada 9200-06-05-01-00

The Bently Nevada 9200-06-05-01-00 is a two-wire velocity seismoprobe transducer. This sensor measures absolute casing vibration on industrial rotating machinery. The 9200-06-05-01-00 delivers reliable data for machine protection systems. It works well on high-speed turbines, compressors, pumps, and fans. The 10 Hz minimum frequency suits applications above 600 cpm.

Key Technical Specifications

Sensitivity: 20 mV/mm/s (500 mV/in/s) with ±5% tolerance. This rating applies when properly terminated and oriented at the calibration angle.

Velocity Range: 25 mm/s (1 in/s) at +22°C casing vibration at 100 Hz with a 10 kΩ load.

Dynamic Operating Range: 2.54 mm (0.100 in) peak to peak maximum displacement.

Coil Resistance: 1.25 kΩ ±5%. Locked coil inductance measures 125 mH typical.

Calibration Load: 10 kΩ between Terminal A and Terminal B. Output measurement occurs across pins A and B.

Sensitivity Temperature Coefficient: 0.2% per degree Celsius for stable readings across temperature changes.

Operating and Storage Temperature: -29°C to +121°C (-20°F to +250°F) for the 9200 series.

Environmental Protection: Dust and moisture resistant construction. Relative humidity tolerance reaches 95% noncondensing.

Housing Material: Case uses anodized aluminum A204. Gasket material is neoprene for reliable sealing.

Dimensions and Weight: Height measures 102 mm (4 inches) typical. Diameter is 41 mm (1.6 inches) typical. Weight equals 300 grams (10.5 ounces).

Ordering Information Breakdown

The Bently Nevada 9200-06-05-01-00 includes these factory options:

• Transducer Mounting Angle/Minimum Operating Frequency Option 06: 0 ±100 degrees, 10 Hz (600 cpm) minimum operating frequency.
• Connector Option 05: Terminal block top mount for easy wiring access.
• Mounting Base Option 01: Circular base with 1/4-20 UNC stud.
• Agency Approval Option 00: No approvals required for non-hazardous installations.

Installation Guidelines

Mount the 9200-06-05-01-00 directly on the machine casing surface. Use the 1/4-20 UNC stud on the circular base. Ensure the mounting surface is clean, flat, and free of paint. Orient the transducer vertically at the 0 degree angle. Connect wires to the terminal block top mount connector. Use a 10 kΩ termination load between Terminal A and Terminal B. Secure the terminal block cover to prevent moisture ingress. Route signal wires away from high voltage cables. Verify proper grounding before connecting to the monitor. Do not exceed the maximum displacement of 2.54 mm peak to peak.

Package Contents (No certificates, No warranty clauses, No courier info)

• 1 x Bently Nevada 9200-06-05-01-00 velocity transducer
• 1 x terminal block top mount connector with cover
• 1 x circular mounting base with 1/4-20 UNC stud
• 1 x neoprene gasket for sealing
• 1 x installation instruction sheet

Frequently Asked Questions (FAQ)

1. What is the minimum operating frequency of the 9200-06-05-01-00?

The Bently Nevada 9200-06-05-01-00 has a minimum operating frequency of 10 Hz (600 cpm) with a 0 ±100 degree mounting angle.

2. Which machines work best with this 10 Hz transducer?

This 9200-06-05-01-00 suits high-speed machines like steam turbines, centrifugal compressors, and high-speed pumps running above 600 rpm.

3. Can this transducer work in hazardous area locations?

No, this model has agency approval option 00 with no certifications. Use it only in non-hazardous environments.

4. What termination load does this sensor require?

You need a 10 kΩ load between Terminal A and Terminal B for proper sensitivity calibration.

5. How does the 10 Hz version differ from the 4.5 Hz version?

The Bently Nevada 9200-06-05-01-00 filters out lower frequency signals below 10 Hz, making it better for high-speed machines where low frequency vibration is not a concern.

Application Scenarios

The Bently Nevada 9200-06-05-01-00 excels in high-speed rotating machinery monitoring. Power plants use it on gas turbines and steam turbine high-pressure sections. Refineries install these sensors on centrifugal compressors and high-speed pumps. The 10 Hz minimum frequency filters out unwanted low frequency noise. This feature improves signal clarity on machines running above 600 rpm. The terminal block connector simplifies wiring in control panels. Petrochemical facilities monitor cracked gas compressors with this transducer. Air separation plants use it on turboexpanders and high-speed blowers.

Frequency Response Characteristics

The 10 Hz minimum operating frequency of the 9200-06-05-01-00 provides distinct advantages. This transducer rejects vibration signals below 600 cpm. Low frequency noise from structural movement does not affect readings. The sensor focuses on machine-related vibration frequencies. This characteristic improves overall measurement accuracy. For machines operating above 600 rpm, this transducer delivers cleaner data. The 0 ±100 degree mounting angle allows flexible orientation within 100 degrees of vertical.

Environmental Robustness & Compliance

This 9200-06-05-01-00 transducer withstands dusty industrial environments. The anodized aluminum case resists corrosion from moisture and mild chemicals. Neoprene gaskets prevent dust and water ingress. Relative humidity up to 95% noncondensing does not affect operation. The sensitivity temperature coefficient of 0.2%/°C ensures stable readings across the full -29°C to +121°C range. The terminal block top mount option provides a sealed connection point for field wiring. This model carries no hazardous area approvals, making it suitable for general purpose use only.

Compatibility Information

The Bently Nevada 9200-06-05-01-00 works with most Bently Nevada monitoring systems. Use it with 1900/65A, 3500, and 2300 series monitors. The 20 mV/mm/s output matches standard velocity input cards. The 10 kΩ termination load requirement matches Bently Nevada barrier and monitor inputs. The terminal block output connects easily to field junction boxes. For legacy systems, verify the input impedance before connecting. This transducer also works with third party monitors that accept 20 mV/mm/s velocity inputs with 10 kΩ loading.

Selection Guide for 9200 Series Frequency Options

Choose the 9200-06-05-01-00 when machine speed exceeds 600 rpm. Select the 4.5 Hz version for machines running between 270 and 600 rpm. The 10 Hz option provides better low frequency noise rejection. This improves signal quality on high-speed machines. The terminal block connector option suits applications requiring field wiring. For cable lengths beyond 50 feet, use the terminal block version with extension cables.

Conclusion

The Bently Nevada 9200-06-05-01-00 delivers accurate casing velocity measurements for high-speed machine monitoring. Its 10 Hz minimum frequency rejects low frequency noise effectively. The terminal block connector simplifies wiring and field maintenance. For reliable vibration monitoring on rotating machinery above 600 rpm without hazardous area requirements, this transducer offers an excellent solution.

Note: This product is new and original in factory packing. For bulk pricing or expedited availability, please contact our sales team.