Atlas Copco EP11PTI100 HR13-MT ShutOff Ergopulse Tool for Precision Assembly

Overview of the Atlas Copco EP11PTI100 HR13-MT Tool

For high-speed fastening operations, the Atlas Copco EP11PTI100 HR13-MT delivers exceptional performance.
This ShutOff Ergopulse tool provides high torque output without any significant reaction force on the operator.
Thanks to the patented TorqueBoost system, this tool achieves rapid torque buildup for efficient fastening.
A precision shutoff feature ensures the tool stops exactly at the correct torque every single cycle.
For specialized applications, Trim and AutoTrim functions enable fine torque adjustments to suit any scenario.
As a pistol grip tool, the EP11PTI100 HR13-MT excels in complex assembly operations and tight spaces.
Swedish manufacturing guarantees that this tool meets rigorous quality standards for industrial use.

Technical Specifications of the EP11PTI100 HR13-MT Tool

Below are the complete technical parameters for this ShutOff pulse tool.

Torque and Fastening Performance

The Atlas Copco EP11PTI100 HR13-MT delivers precise torque control for every fastening application.
Its fixed transducer torque CCW service provides 105 Nm for reliable fastening results.
For lighter joints, the tool's torque range minimum reaches 52 ft-lb (approximately 70 Nm).
At the upper end, the torque range maximum achieves 74 ft-lb (approximately 100 Nm).
Because the shutoff feature automatically stops the tool at the preset torque value, operators never over-tighten.
As a result, this tool effectively prevents both over-tightening and under-tightening on every joint.
During maintenance, you should apply 35 Nm torque to the pulse unit casing.
Following this specification ensures proper assembly of the pulse unit during service procedures.

Speed and Free Speed Performance

With the EP11PTI100 HR13-MT, high operational speeds deliver maximum productivity for your assembly lines.
The free speed reaches 5000 r/min, enabling rapid rundown of threaded fasteners.
During operation, the tool's pulsing frequency CCW ranges from 15 to 25 Hz for smooth torque delivery.
In addition, the TorqueBoost system enables fast torque build-up without any reaction force on the operator.
Consequently, operators experience significantly less fatigue even during extended use periods.
For volume production environments, this high speed makes the tool particularly suitable.
Nevertheless, the shutoff feature still maintains precise stopping at these elevated speeds.

Air Supply Requirements

The Atlas Copco EP11PTI100 HR13-MT requires clean, dry compressed air for proper operation.
Specifically, the air inlet thread size measures 3/8 inch for standard industrial connections.
For adequate air flow, you should use a 10 mm minimum hose size.
Set the nominal working pressure to 91 psi for optimal tool performance.
Additionally, never exceed the maximum working pressure of 100 psi for safe operation.
Under load, the tool consumes 30 cfm of air at rated pressure.
Therefore, ensure your compressed air supply can deliver this volume continuously.
Otherwise, tool performance may degrade during high-duty cycle applications.

Dimensions and Mechanical Design

The EP11PTI100 HR13-MT features a compact pistol grip design for operator comfort.
Total length measures only 201 mm, allowing operators to access tight spaces easily.
The CS distance (center to side) measures 30.7 mm for adequate clearance around the tool.
For precise gap measurement, the X-Gauge diameter measures 1.7 mm.
For storage and shipping, the package dimensions are 34.5 cm x 29.1 cm x 10.7 cm.
Moreover, the pistol grip design significantly reduces operator wrist strain during long shifts.
Thus, the Atlas Copco EP11PTI100 HR13-MT keeps operators comfortable throughout extended production runs.

Pulse Unit and Lubrication

A hydraulic pulse unit generates torque inside the EP11PTI100 HR13-MT.
The full pulse unit holds precisely 18.4 ml of oil.
This oil transmits hydraulic pressure to the output square drive mechanism.
For proper function, you must check the pulse unit oil regularly and refill as needed.
Only use Atlas Copco recommended pulse oil with this tool.
Furthermore, the Atlas Copco EP11PTI100 HR13-MT pulse unit is fully serviceable on-site.
Following the maintenance schedule regularly extends the pulse mechanism's service life.

Noise and Vibration Characteristics

The EP11PTI100 HR13-MT prioritizes operator comfort with low noise and vibration levels.
Under normal operating conditions, the tool produces a sound pressure level of 82.9 dB(A).
The tool follows ISO15744 standard for sound measurement, ensuring accuracy and comparability.
Sound uncertainty measures ±3 dB(A) for reliable measurement confidence.
According to ISO28927-2, the tool generates a vibration value of 3.41 m/s².
Vibration uncertainty measures ±0.76 m/s² for measurement assurance.
These low vibration levels significantly reduce operator hand-arm fatigue during use.
As a result, the Atlas Copco EP11PTI100 HR13-MT suits long-term daily operation perfectly.

Certifications and Standards Compliance

The EP11PTI100 HR13-MT meets multiple international standards for safety and compliance.
For EU markets, the tool complies with Legislation 2006/42/EC (Machinery Directive).
Regarding EU Standards, the tool follows EN ISO 11148-6:2012 for assembly tools.
For UK markets, the tool complies with UK Regulations S.I. 2008/1597.
Similarly, the tool follows UK Standard BS EN ISO 11148-6:2012.
For Eurasian Customs Union markets, the tool holds EAC certification.
The SCIP number for substance tracking is 9e6972b2-2f4b-487b-bd1c-d051871d8321.
Consequently, all these certifications ensure legal compliance for global sales.

Trim and AutoTrim Functions

The Atlas Copco EP11PTI100 HR13-MT includes advanced adjustment features for precision tuning.
The Trim function allows operators to make fine torque adjustments for specialized applications.
On the other hand, the AutoTrim function automatically maintains torque consistency over time.
These features effectively compensate for tool wear and environmental changes.
Thus, the EP11PTI100 HR13-MT delivers consistent results across long production runs.
Operators can quickly adapt the tool to different fastener requirements as needed.
Best of all, no special tools are needed for these on-tool adjustments.

ShutOff Function and Torque Control

The ShutOff feature distinguishes this tool from standard pulse units on the market.
When the preset torque reaches the target, the tool stops automatically and immediately.
This mechanism prevents over-tightening and ensures consistent joint quality across all fasteners.
The Atlas Copco EP11PTI100 HR13-MT shutoff mechanism delivers both repeatability and precision.
For each cycle, the tool requires no external torque monitoring or verification.
Hence, production efficiency increases significantly on assembly lines using this tool.
The mechanical shutoff mechanism design provides high reliability over the tool's lifetime.

Installation and Setup Guidelines

Follow these steps to set up the Atlas Copco EP11PTI100 HR13-MT correctly.

1. Connect a 3/8 inch air fitting to the tool inlet securely.

2. Use a 10 mm minimum hose diameter for adequate air supply.

3. Set regulated air pressure to 91 psi (nominal) at the tool inlet.

4. Add 18.4 ml of pulse oil to a new pulse unit before first use.

5. Install the correct 1/2 inch square drive socket onto the anvil.

6. Test the tool on a torque analyzer to verify its performance.

7. Adjust the shutoff setting to match your required torque value.

8. Use the Trim function for fine adjustments if necessary.

9. Train operators on proper grip and trigger technique thoroughly.

10. Establish a daily oil inspection and refill schedule for maintenance.

Only trained assembly technicians should operate this powerful tool.

Package Contents for the Atlas Copco EP11PTI100 HR13-MT

• One Atlas Copco EP11PTI100 HR13-MT ShutOff tool

• One pre-filled pulse unit containing 18.4 ml of oil

• One 1/2 inch square drive anvil installed on the tool

• One 3/8 inch air inlet fitting for connection

• One operation and maintenance manual with full instructions

Common FAQs About This Atlas Copco EP11PTI100 Tool

Q1: What does the ShutOff feature mean on this tool?
A1: On the EP11PTI100 HR13-MT, the ShutOff feature means the tool stops automatically. The tool stops precisely when it reaches the preset torque value during fastening.

Q2: How does the TorqueBoost system benefit operators?
A2: TorqueBoost is Atlas Copco's patented technology inside the EP11PTI100 HR13-MT. This system delivers rapid torque buildup without any reaction force to the operator's hands.

Q3: Can operators use this tool for reverse threaded fasteners?
A3: The Atlas Copco EP11PTI100 HR13-MT shows CCW torque data for service applications. For CW operation, please check the full tool specification or consult Atlas Copco directly.

Q4: How often should technicians change the pulse unit oil?
A4: Technicians should check the EP11PTI100 HR13-MT pulse unit oil daily before operation. Follow the detailed maintenance schedule in the product manual for oil changes.

Q5: What difference exists between Trim and AutoTrim functions?
A5: The Trim function allows manual torque adjustment on the EP11PTI100 HR13-MT by the operator. The AutoTrim function automatically maintains torque consistency over time without operator input.

Typical Applications for the Atlas Copco EP11PTI100 HR13-MT

Precision assembly operations benefit greatly from the Atlas Copco EP11PTI100 HR13-MT.
For automotive engine and transmission assembly lines, this tool works exceptionally well.
Similarly, heavy equipment and agricultural machinery manufacturing suit this tool perfectly.
M12 bolted joints in structural applications also benefit from this tool's precision.
Furniture and appliance assembly lines also benefit from the shutoff precision feature.
In short, any torque-critical joint receives reliable fastening from the EP11PTI100 HR13-MT.

Ordering and Logistics Information

This Atlas Copco EP11PTI100 HR13-MT ships from our global distribution center.
Original factory packaging protects this precision assembly tool during transit.
For volume pricing on Atlas Copco Ergopulse tools, please contact our team.
Before placing an order, always verify your torque requirements and air supply specifications.
For urgent production line needs, we offer express shipping options.