GE Fanuc IC698PSA100 | Rx7i PACsystem Power Supply 100W
Introduction:
GE Fanuc IC698PSA100 Power Supply for Rx7i PACsystem. 85-264V AC or 100-150V DC input. 100W output with overvoltage protection.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
Product Overview
The GE Fanuc IC698PSA100 is a power supply module for the Rx7i PACsystem platform. It mounts to the leftmost slot (Slot 0) of any RX7i standard rack. This unit accepts wide-range AC or DC input power. The GE Fanuc IC698PSA100 delivers logic level signals to modules via the system backplane. Users trust this power supply for reliable operation in critical automation systems.
Technical Specifications
The IC698PSA100 delivers robust power with comprehensive protection features. Below are the complete technical details.
General Specifications
Brand: GE Fanuc for industrial automation reliability.
Series: Rx7i PACsystem platform.
Manufacturer (Former): GE Intelligent Platforms (GE IP).
Manufacturer (Current): Emerson Automation.
Part Number: IC698PSA100 for precise identification.
Product Description: Power Supply Module.
Mounting: Leftmost slot (Slot 0) of RX7i universal backplane.
Power Rating: 125 Watts typical.
Maximum Input Power: 150 Watts.
Input Voltage Specifications
Input Voltage Range (AC): 85 to 264 VAC.
Nominal AC Voltage: 120/240 VAC.
Input Voltage Range (DC): 100 to 150 VDC.
Nominal DC Voltage: 125 VDC.
AC Input Frequency: 47 to 63 Hz.
Input Power Factor: 0.99 minimum.
Output Voltage Specifications
Output Voltage 1: 5.1 VDC nominal (range: 4.875 to 5.25V).
Output Voltage 2: +12 VDC nominal (range: 11.64 to 12.6V).
Output Voltage 3: -12 VDC nominal (range: -12.60 to -11.64V).
Total Output Power: 100 Watts on all three outputs combined.
Output Current Specifications
5.1 VDC Output Current: 0 to 20 Amperes.
+12 VDC Output Current: 0 to 2 Amperes.
-12 VDC Output Current: 0 to 1 Ampere.
Ride Through and Hold Up Time
Ride Through Time: 15 milliseconds minimum without affecting DC outputs.
Hold Up Time: 5 milliseconds minimum before DC output drops out.
Power Interruption Protection: Maintains operation during brief power loss.
Isolation and Protection
Isolation Rating: 1500 Volts for input to output separation.
Overvoltage Protection (5V): 5.7 to 6.7 Volts.
Overcurrent Protection (5V): 21A at +5 VDC output.
Overcurrent Protection (+12V): 2.5A at +12 VDC output.
Overcurrent Protection (-12V): 3.5A at -12 VDC output.
Output Protection Types: Overvoltage and overcurrent protection.
Enhanced Safety: Protected from over-temperature situations.
Wiring Specifications
Input Wire Size: AWG #16 (1.3 mm²) solid or stranded copper.
Wire Insulation Rating: 75°C (167°F) minimum.
Ground Wire Size: #12 AWG (3.3 mm²) copper wire.
Ground Insulation Rating: 75°C (167°F) minimum.
GND Termination Benefit: Significantly reduces system noise.
LED Indicators
FIELD OK LED: Alerts operators about field power status.
OUTPUT OK LED: Indicates output voltage is within specification.
OVER TEMP LED: Warns when internal temperature exceeds limits.
Visual Diagnostics: Quick status check at a glance.
Front Panel Switch
Switch Location: Front side of the power supply.
Switch Function: Enables or disables the output channel.
AC Line Interference: Does not interfere with AC line input.
Manual Control: Allows output shutdown without removing input power.
Environmental Specifications
Operating Temperature: 0°C to 60°C (32°F to 140°F).
Hazardous Area Certification: Certified for Class 1 Division 2 environment.
Cooling: Convection cooled, no internal fan required.
Installation Guide
Follow these steps to install the GE Fanuc IC698PSA100 correctly.
Power Down the System: Turn off all power to the RX7i rack assembly.
Locate Slot 0: Find the leftmost slot position on the RX7i backplane.
Insert the Module: Slide the IC698PSA100 into Slot 0 carefully.
Secure the Module: Tighten the mounting screws to hold the module firmly.
Prepare AC/DC Wires: Use AWG #16 copper wire with 75°C insulation.
Connect Input Power: Wire 85-264 VAC or 100-150 VDC to input terminals.
Connect Ground Wire: Use #12 AWG copper wire for ground connection.
Secure Ground Termination: Proper grounding eliminates system noise.
Verify Output Connections: Backplane distributes power to all modules.
Set Front Panel Switch: Ensure output switch is in the ON position.
Apply Input Power: Turn on the external power source to the module.
Check LED Indicators: Verify FIELD OK, OUTPUT OK, and no OVER TEMP.
Measure Output Voltages: Confirm 5.1V, +12V, and -12V at backplane.
Test Ride Through: Verify 15 ms minimum ride through time.
Installation Notes
Mount the power supply only in Slot 0 of the RX7i rack.
Use properly rated copper wire with 75°C insulation.
Proper grounding significantly reduces system noise.
The front panel switch does not interfere with AC line input.
Operating temperature range is 0°C to 60°C.
Packaging List
This unit ships as a new and original product.
GE Fanuc IC698PSA100 Power Supply Module (Rx7i PACsystem)
Mounting screws for rack installation
Product instruction manual
Class 1 Division 2 certification sheet
Anti-static factory packaging box
Frequently Asked Questions (FAQ)
1. Which slot does the IC698PSA100 occupy in an RX7i rack?
The GE Fanuc IC698PSA100 must mount in Slot 0, the leftmost slot of any RX7i standard rack. Other slots do not provide proper backplane power distribution.
2. What input voltages does this power supply accept?
The IC698PSA100 accepts 85 to 264 VAC (120/240 VAC nominal) at 47-63 Hz. It also accepts 100 to 150 VDC (125 VDC nominal) for DC applications.
3. What is the total output power of the IC698PSA100?
The GE Fanuc IC698PSA100 delivers a maximum total output of 100 Watts across all three outputs (5.1V, +12V, and -12V combined).
4. What do the LED indicators on this power supply show?
The IC698PSA100 has three LEDs. FIELD OK shows field power status. OUTPUT OK shows output voltage health. OVER TEMP warns of high internal temperature.
5. Is this power supply certified for hazardous area installation?
Yes, the GE Fanuc IC698PSA100 is certified to operate in a Class 1 Division 2 hazardous environment. This suits installations with potentially explosive atmospheres.