8LSA53.ee030ffgg-4 | B&R 3000 rpm Servo Motor



Introduction:
The B&R 8LSA53.ee030ffgg-4 is a self-cooled three-phase synchronous servo motor delivering 9.3 Nm nominal torque and 2922 W nominal power for precise, dynamic positioning.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
The B&R 8LSA53.ee030ffgg-4 is a Description: 8LSA three-phase synchronous servo motor for industrial control and automation applications.
The B&R 8LSA53.ee030ffgg-4 is a self-cooled three-phase synchronous servo motor that delivers 9.3 Nm of nominal torque at 3000 rpm. Its permanent-magnet, electronically commutated design provides high dynamics and positioning precision in a slim, elongated housing.
Key Features and Technical Specifications
This servo motor combines a compact footprint with a large overload capacity, making it suitable for demanding motion control tasks. The embedded parameter chip enables automatic drive identification, while reduced cogging and optimized torque rippling support smooth controllability.
- Nominal speed: 3000 rpm
- Nominal torque: 9.3 Nm
- Nominal power: 2922 W
- Nominal current: 5.7 A
- Stall torque: 12.0 Nm
- Stall current: 7.4 A
- Maximum torque: 30.0 Nm
- Maximum current: 27.9 A
- Maximum speed: 5000 rpm
- Torque constant: 1.63 Nm/A
- Voltage constant: 98.44 V/1000rpm
- Stator resistance: 1.33 Ohm
- Stator inductance: 15.7 mH
- Electrical time constant: 11.8 ms
- Thermal time constant: 38 min
- Moment of inertia: 6.8 kg·cm2
- Mass (without brake): 8.60 kg
- Holding torque of brake: 15 Nm
- Brake mass: 1.40 kg
- Moment of inertia of brake: 1.66 kg·cm2
- Cable cross-section: 0.75 mm2
- Connector size/type: 1
- Recommended servo drive: ACOPOS 8X8X

How Does this drive Perform in Harsh Oil & Gas Environments?
The motor operates reliably across a wide temperature range, making it suitable for field-proven performance in challenging conditions. Its rugged construction and IP64 protection (IP65 with optional oil seal) help resist dust and water ingress.
- Operating temperature: -15 to +40 °C (max +55 °C with derating)
- Storage/transport temperature: -20 to +60 °C
- Humidity: max 90% non-condensing
- Max elevation: 2000 m (4000 m with ytec connectors)
- Protection class: IP64 per EN 60034-5 (IP65 with optional oil seal)
- Insulation class: IEC 60085 F, max winding temp 155 °C
- Cooling: self-cooled, free-circulation surface cooling IC4A0A0
- Compliance: UL/C-UR-US listed (file E360421), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU
Comparison with Similar Product Categories
When selecting a servo motor for oil and gas applications, engineers often compare self-cooled synchronous motors with fan-cooled or liquid-cooled alternatives. This drive offers distinct advantages in terms of compactness and maintenance-free operation.
- Self-cooled vs. fan-cooled: this drive uses free-circulation surface cooling, eliminating the need for a separate fan and reducing maintenance points. Fan-cooled variants (such as 8LSC) specify fan noise, while this model does not require a fan.
- IP64 vs. IP65: Standard protection is IP64; an optional oil seal DIN 3760 raises it to IP65 for washdown or dusty environments.
- Overload capacity: Maximum torque of 30.0 Nm provides a high overload margin relative to the 9.3 Nm nominal torque, supporting dynamic acceleration cycles.
- Feedback options: Resolver or EnDat encoder (inductive or optical) can be specified, with functional safety encoders available for mission-critical positioning.

Installation and Setup
Mounting follows EN 60034-7 (IM 3001 horizontal, IM 3011 vertical attached, IM 3031 vertical standing). The flange conforms to DIN 42948 Form A, and the shaft end to DIN 748 Form E. For connection, the motor uses built-in plug-in connectors (speedtec 923, itec, ytec, or htec 723 systems). A single-cable hybrid solution is available. Ensure the recommended ACOPOS 8X8X servo drive is configured with the correct feedback settings; the embedded parameter chip simplifies commissioning by enabling automatic drive identification.
Maintenance and Reliability
With no external fan and a sealed housing, the motor requires minimal routine maintenance. Inspect the oil seal periodically if the IP65 option is used, and verify that flange temperature does not exceed 65 °C. The thermal time constant of 38 minutes indicates a slow thermal response, which helps tolerate short overloads without rapid heating. Bearing life is calculated per DIN ISO 281; permissible radial and axial forces are speed-dependent and detailed in the technical data chapter. For applications with high shaft loads, an optional reinforced A-side bearing is available for sizes 4-8.
Frequently Asked Questions
What is the operating temperature range of this drive?
The B&R this drive operates from -15 to +40 °C, with a maximum of +55 °C when derated by 10% per 10 K above 40 °C. Storage and transport range is -20 to +60 °C.
Can this drive be used with functional safety systems?
Yes, the B&R this drive is available with encoders that support functional safety (safety-related position measurement). The STO function is implemented by the connected ACOPOS servo drive.
What is the maximum speed of this drive?
The B&R this drive achieves a maximum speed of 5000 rpm, with a nominal speed of 3000 rpm.
What servo drive is recommended for this drive?
The B&R this drive is recommended for use with an ACOPOS 8X8X servo drive, which supports the embedded parameter chip for automatic identification.
Does this drive include a holding brake?
Yes, the B&R this drive includes a holding brake with 15 Nm holding torque and a brake mass of 1.40 kg.
Contact PetroPartsOnline for parts suited to your application's requirements.
{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "8LSA53.ee030ffgg-4 | B&R 3000 rpm Servo Motor", "mpn": "8LSA53.ee030ffgg-4", "sku": "8LSA53.ee030ffgg-4", "brand": {"@type": "Brand", "name": "B&R"}, "description": "The B&R 8LSA53.ee030ffgg-4 is a Description: 8LSA three-phase synchronous servo motor for industrial control and automation applications. The B&R 8LSA53.ee030ffgg-4 is a self-cooled three-phase synchronous servo motor that delivers 9.3 Nm of nominal torque at 3000 rpm. Its permanent-magnet, electronically commutated design provides high dynamics and positioning precision in a slim, elongated housing. Key Features and Technical Specifications This servo motor combines a compact footprint with a l", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112761-8LSA53.ee030ffgg-4_1__fpe523043a.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112767-8LSA53.ee030ffgg-4_2__fp379ec4d5.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112773-8LSA53.ee030ffgg-4_3__fpaf8c94d1.jpg"], "category": "I/O Modules"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "How Does this drive Perform in Harsh Oil & Gas Environments?", "acceptedAnswer": {"@type": "Answer", "text": "The motor operates reliably across a wide temperature range, making it suitable for field-proven performance in challenging conditions. Its rugged construction and IP64 protection (IP65 with optional oil seal) help resist dust and water ingress."}}, {"@type": "Question", "name": "What is the operating temperature range of this drive?", "acceptedAnswer": {"@type": "Answer", "text": "The B&R this drive operates from -15 to +40 °C, with a maximum of +55 °C when derated by 10% per 10 K above 40 °C. Storage and transport range is -20 to +60 °C."}}, {"@type": "Question", "name": "Can this drive be used with functional safety systems?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, the B&R this drive is available with encoders that support functional safety (safety-related position measurement). The STO function is implemented by the connected ACOPOS servo drive."}}, {"@type": "Question", "name": "What is the maximum speed of this drive?", "acceptedAnswer": {"@type": "Answer", "text": "The B&R this drive achieves a maximum speed of 5000 rpm, with a nominal speed of 3000 rpm."}}, {"@type": "Question", "name": "What servo drive is recommended for this drive?", "acceptedAnswer": {"@type": "Answer", "text": "The B&R this drive is recommended for use with an ACOPOS 8X8X servo drive, which supports the embedded parameter chip for automatic identification."}}, {"@type": "Question", "name": "Does this drive include a holding brake?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, the B&R this drive includes a holding brake with 15 Nm holding torque and a brake mass of 1.40 kg. Contact PetroPartsOnline for parts suited to your application's requirements."}}]}]}
