+86 18030005825
No.95, Xiangxing Road, Xiang'an District, Xiamen

8LSA36.ee060ff00-4 | B&R 6000 rpm Servo Motor

Introduction:

The B&R 8LSA36.ee060ff00-4 is a self-cooled three-phase synchronous servo motor delivering 3.0 Nm nominal torque and 1885 W nominal power for precise, dynamic motion.

ubest aotomation    Customer Reviews

UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

Product Attributes:

Manufacturer: B&R
Part Number: 8LSA36.ee060ff00-4
Type: Description: 8LSA three-phase synchronous servo motor
Condition: Subject to stock check
Shipping Port: Xiamen
Warranty: One year

Notice: For real-time prices and inventory, please click the button below to contact us.

Description
Inquiry

The B&R 8LSA36.ee060ff00-4 is a Description: 8LSA three-phase synchronous servo motor for industrial control and automation applications.

The B&R 8LSA36.ee060ff00-4 is a self-cooled three-phase synchronous servo motor that delivers 3.0 Nm of nominal torque at 6000 rpm. Its permanent-magnet, electronically commutated design suits applications that demand high dynamics, positioning precision, compact size and reduced weight.

How does this drive address torque ripple and controllability?

Reduced cogging and optimized torque rippling give this motor good controllability in demanding motion profiles. An embedded parameter chip enables automatic drive identification, so the connected drive can recognize the motor without manual data entry. The result is faster commissioning and fewer configuration errors on the shop floor.

With a maximum torque of 14.8 Nm and a maximum current of 33.9 A, the motor offers a large overload capacity for short, high-demand moves. The 5 pole-pair design and 0.73 Nm/A torque constant support predictable current-to-torque behavior across the speed range.

Figure 1: Front view of the B&R 8LSA36.ee060ff00-4 Description: 8LSA three-phase synchronous servo motor showing its physical design and enclosure.

Key specifications for oil and gas duty

  • Nominal speed: 6000 rpm
  • Nominal torque: 3.0 Nm
  • Nominal power: 1885 W
  • Nominal current: 4.1 A
  • Stall torque: 4.5 Nm
  • Stall current: 6.2 A
  • Maximum torque: 14.8 Nm
  • Maximum current: 33.9 A
  • Maximum speed: 6600 rpm
  • Torque constant: 0.73 Nm/A
  • Voltage constant: 43.98 V/1000rpm
  • Stator resistance: 1.36 Ohm
  • Stator inductance: 7.4 mH
  • Electrical time constant: 5.4 ms
  • Thermal time constant: 22 min
  • Moment of inertia: 1.5 kg·cm2
  • Mass without brake: 4.08 kg
  • Holding torque of brake: 8 Nm
  • Brake mass: 1.100 kg
  • Cable cross-section: 0.75 mm2
  • Recommended servo drive: ACOPOS 8X8X

What operating temperature and environmental limits apply?

The motor operates from -15 to +40 degC, with a maximum of +55 degC. Above 40 degC, derate by 10% per 10 K, and above 1000 m elevation, derate by 5% per 1000 m up to a maximum of 2000 m. The maximum flange temperature is 65 degC. Protection is IP64 per EN 60034-5, and IP65 is available with an optional oil seal to DIN 3760. Storage and transport range from -20 to +60 degC at a maximum of 90% non-condensing humidity.

These ratings make the motor suitable for rugged, field-proven installations where temperature swings and dust are routine. The self-cooled, free-circulation surface cooling (IC4A0A0) avoids dependence on forced air, which simplifies enclosure design in mission-critical cabinets.

Figure 2: Technical layout and connection details for the B&R 8LSA36.ee060ff00-4 Description: 8LSA three-phase synchronous servo motor.

How is the motor integrated with ACOPOS drives and feedback systems?

The recommended ACOPOS 8X8X servo drive pairs with the motor for a matched motion axis. Feedback options include resolver (R0/R2) or EnDat encoder in inductive or optical versions, with 32-line single-turn or multi-turn variants. Encoders for functional safety are available, supporting safety-related position measurement. The STO function is implemented by the connected ACOPOS servo drive, not by the motor itself.

Built-in plug-in connectors, including swivel and SpeedTec-type, simplify wiring. A single-cable hybrid solution is also available. For -4 generation units, power and encoder connections use speedtec (923), itec, ytec or htec (723) systems. The elevation limit is 2000 m with speedtec connectors or 4000 m with ytec connectors.

Integration note: wiring into a drive network may require an external gateway or connection module. Confirm cable and gateway compatibility with PetroPartsOnline before commissioning.

Frequently Asked Questions

What is the nominal power of the B&R 8LSA36.ee060ff00-4?

The B&R 8LSA36.ee060ff00-4 delivers 1885 W of nominal power at 6000 rpm and 3.0 Nm nominal torque.

Which servo drive is recommended for the 8LSA36.ee060ff00-4?

B&R recommends the ACOPOS 8X8X servo drive for the 8LSA36.ee060ff00-4, which provides a matched motion axis with compatible feedback evaluation.

What is the operating temperature range of the 8LSA36.ee060ff00-4?

The B&R 8LSA36.ee060ff00-4 operates from -15 to +40 degC, with a maximum of +55 degC and derating above 40 degC.

Does the 8LSA36.ee060ff00-4 support functional safety?

Encoders for functional safety are available for the B&R 8LSA36.ee060ff00-4, and STO is implemented by the connected ACOPOS servo drive.

What is the maximum speed of the 8LSA36.ee060ff00-4?

The B&R 8LSA36.ee060ff00-4 reaches a maximum speed of 6600 rpm.

What maintenance practices support long service life?

Inspect the motor periodically for dust buildup on the cooling surfaces and check the oil seal if IP65 protection is required. Bearing life follows DIN ISO 281, and permissible radial and axial forces are speed-dependent; the optional reinforced A-side bearing (sizes 4-8) increases allowable forces. The thermal protection sensor is KTY83-110 up to rev C7 or AM-PTC1000 for rev C8/C9, with a maximum winding temperature of 155 degC, limited via ACOPOS to 110 degC with EnDat or 130 degC with resolver.

Because the motor is self-cooled, keeping the housing free of debris supports the 22-minute thermal time constant and helps avoid derating. In oil and gas environments, routine inspection of connectors and seals prevents moisture ingress and extends dependable operation.

Frequently asked questions

What is the nominal power of the B&R this drive?

The B&R this drive delivers 1885 W of nominal power at 6000 rpm and 3.0 Nm nominal torque.

Which servo drive is recommended for this drive?

B&R recommends the ACOPOS 8X8X servo drive for this drive, which provides a matched motion axis with compatible feedback evaluation.

What is the operating temperature range of this drive?

The B&R this drive operates from -15 to +40 degC, with a maximum of +55 degC and derating above 40 degC.

Does this drive support functional safety?

Encoders for functional safety are available for the B&R this drive, and STO is implemented by the connected ACOPOS servo drive.

What is the maximum speed of this drive?

The B&R this drive reaches a maximum speed of 6600 rpm.

Contact PetroPartsOnline for parts suited to your application's requirements.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "8LSA36.ee060ff00-4 | B&R 6000 rpm Servo Motor", "mpn": "8LSA36.ee060ff00-4", "sku": "8LSA36.ee060ff00-4", "brand": {"@type": "Brand", "name": "B&R"}, "description": "The B&R 8LSA36.ee060ff00-4 is a Description: 8LSA three-phase synchronous servo motor for industrial control and automation applications. The B&R 8LSA36.ee060ff00-4 is a self-cooled three-phase synchronous servo motor that delivers 3.0 Nm of nominal torque at 6000 rpm. Its permanent-magnet, electronically commutated design suits applications that demand high dynamics, positioning precision, compact size and reduced weight. How does this drive address torque ripple and controllability? Reduced co", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112491-8LSA36.ee060ff00-4_1__fp0c93e06f.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112497-8LSA36.ee060ff00-4_2__fpf06e3943.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1794112504-8LSA36.ee060ff00-4_3__fpb6b5967c.jpg"], "category": "I/O Modules"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Which servo drive is recommended for the 8LSA36.ee060ff00-4?", "acceptedAnswer": {"@type": "Answer", "text": "B&R recommends the ACOPOS 8X8X servo drive for the 8LSA36.ee060ff00-4, which provides a matched motion axis with compatible feedback evaluation."}}, {"@type": "Question", "name": "What is the operating temperature range of the 8LSA36.ee060ff00-4?", "acceptedAnswer": {"@type": "Answer", "text": "The B&R 8LSA36.ee060ff00-4 operates from -15 to +40 degC, with a maximum of +55 degC and derating above 40 degC."}}, {"@type": "Question", "name": "Does the 8LSA36.ee060ff00-4 support functional safety?", "acceptedAnswer": {"@type": "Answer", "text": "Encoders for functional safety are available for the B&R 8LSA36.ee060ff00-4, and STO is implemented by the connected ACOPOS servo drive."}}, {"@type": "Question", "name": "What is the maximum speed of the 8LSA36.ee060ff00-4?", "acceptedAnswer": {"@type": "Answer", "text": "The B&R 8LSA36.ee060ff00-4 reaches a maximum speed of 6600 rpm."}}, {"@type": "Question", "name": "What maintenance practices support long service life?", "acceptedAnswer": {"@type": "Answer", "text": "Inspect the motor periodically for dust buildup on the cooling surfaces and check the oil seal if IP65 protection is required. Bearing life follows DIN ISO 281, and permissible radial and axial forces are speed-dependent; the optional reinforced A-side bearing (sizes 4-8) increases allowable forces. The thermal protection sensor is KTY83-110 up to rev C7 or AM-PTC1000 for rev C8/C9, with a maximum winding temperature of 155 degC, limited via ACOPOS to 110 degC with EnDat or 130 degC with resolver. Because the motor is self-cooled, keeping the housing free of debris supports the 22-minute thermal time constant and helps avoid derating. In oil and gas environments, routine inspection of connectors and seals prevents moisture ingress and extends dependable operation. Frequently asked questions What is the nominal power of the B&R this drive? The B&R this drive delivers 1885 W of nominal power at 6000 rpm and 3.0 Nm nominal torque. Which servo drive is recommended for this drive? B&R recommends the ACOPOS 8X8X servo drive for this drive, which provides a matched motion axis with compatible feedback evaluation. What is the operating temperature range of this drive? The B&R this drive operates from -15 to +40 degC, with a maximum of +55 degC and derating above 40 degC. Does this drive support functional safety? Encoders for functional safety are available for the B&R this drive, and STO is implemented by the connected ACOPOS servo drive. What is the maximum speed of this drive? The B&R this drive reaches a maximum speed of 6600 rpm. Contact PetroPartsOnline for parts suited to your application's requirements."}}]}]}

About Ubest

Ubest Automation is a leading global provider of automation products, with deep partnerships with major automation manufacturers to provide customers with customized business solutions, cost-effective products, and comprehensive services.

 

Contact Us

Phone:+86 180 3000 5825

Address:Room 7A, No. 59 Hubin North Road, Siming District Xiamen City China

Email: [email protected]

Contact: Klaus

 

Industry Links

© 2026, Ubest Automation Limited  All Rights Reserved. sitemap