GE Fanuc IC670CHS001 Barrier Style I/O Base

The GE Fanuc IC670CHS001 is a barrier style I/O terminal base. It belongs to the Field Control platform now under Emerson Automation. This module serves as both a carrier and a wiring termination point. You can mount up to two Field Control modules on this base. The barrier style terminals provide clear wire isolation and safety.

Technical Specifications of the IC670CHS001

The GE Fanuc IC670CHS001 features 37 barrier style termination points. Two of these terminals are for power supply connections. The remaining 35 terminals connect to field devices. Each terminal can hold up to two wires. This design saves space and reduces the need for additional terminal blocks.

Wiring and Terminal Details

This I/O base accepts wire sizes from AWG #14 (2.1 mm²) to AWG #22 (0.35 mm²). You can use solid or stranded copper wire. The wire insulation rating must be 90°C minimum. The recommended tightening torque is 8 pounds per inch. The ground terminal requires AWG #14 wire. Ground wire length should not exceed 4 inches or 10.16 cm.

Module Compatibility and Mounting

The GE Fanuc IC670CHS001 works with modules having suffix J or above in their catalog number. You can mount the base on a DIN rail or directly on a panel. The mounting orientation must be horizontal only. For connecting multiple bases, use the IC670CBL001 pre-assembled cable. The base supports auxiliary terminal blocks for extra connections.

Hot Swap and Backplane Communication

The GE Fanuc IC670CHS001 supports hot insertion and removal. This feature works only in non-hazardous locations. The Bus Interface Unit must have firmware version 2.1 or later. The base includes embedded backplane connectors. These connectors attach to adjacent terminal blocks automatically. This creates a communication bus between modules.

Installation Guidelines for the IC670CHS001

Mount the GE Fanuc IC670CHS001 securely on a DIN rail or panel. Place modules onto the base by pressing firmly. Tighten the module screws to prevent vibration loosening. The manufacturer recommends 8 to 10 pounds per inch of torque. The base comes with protective barriers from the factory. These barriers prevent contact with adjacent cables and short circuits. You can connect or disconnect wiring while the base is powered on. The base is keyed to prevent incorrect module installation.

Package Contents

• One (1) GE Fanuc IC670CHS001 barrier style I/O base

• Protective terminal barriers (pre-installed)

• Mounting hardware and installation instructions

Common FAQs for the IC670CHS001

1. How many modules can mount on the IC670CHS001 base?
The GE Fanuc IC670CHS001 holds up to two Field Control modules. These can be discrete or analog I/O modules from the same series.

2. Does the IC670CHS001 support live module removal?
Yes, the GE Fanuc IC670CHS001 supports hot swap in non-hazardous locations. You need a BIU with firmware version 2.1 or later for this feature.

3. What wire size works with this terminal base?
The GE Fanuc IC670CHS001 accepts AWG #14 through AWG #22 wires. Each terminal holds up to two wires. Use copper wire rated for 90°C.

4. Can I mount the IC670CHS001 vertically?
No, the GE Fanuc IC670CHS001 requires horizontal mounting only. This ensures proper cooling and module retention.

5. What is the tightening torque for the terminals?
The recommended torque for the GE Fanuc IC670CHS001 terminals is 8 pounds per inch. Do not exceed 10 pounds per inch to avoid damage.

Why Choose the GE Fanuc IC670CHS001?

This barrier style I/O base provides reliable field wiring termination. The 37 terminals handle many I/O points in a compact space. Hot swap support reduces downtime during module replacement. The keyed design prevents installation errors. Order the GE Fanuc IC670CHS001 today to build your Field Control system.