Bently Nevada 9200-02-05-05-00 Velocity Transducer
Introduction:
Bently Nevada two-wire velocity transducer with 20 mV/mm/s sensitivity. It measures casing vibration from -29°C to +121°C.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
Bently Nevada 9200-02-05-05-00 Two-Wire Velocity Transducer
Full Summary: The Bently Nevada 9200-02-05-05-00 is a rugged two-wire velocity seismoprobe transducer. It offers 20 mV/mm/s sensitivity and a 4.5 Hz minimum operating frequency. Ideal for industrial vibration monitoring.
Technical Specifications
The Bently Nevada 9200-02-05-05-00 delivers a sensitivity of 20 mV/mm/s (500 mV/in/s) ±5%. This measurement uses proper termination and calibration angle orientation.
Its dynamic operating range reaches a maximum displacement of 2.54 mm (0.100 in) peak to peak. The velocity range equals 25 mm/s (1 in/s) at +22°C with a 10 kΩ load and 100 Hz casing vibration.
Coil resistance for this Two-Wire Velocity Seismoprobe Transducer is 1.25 kΩ ±5%. Locked coil inductance measures 125 mH typical.
Operating and storage temperature ranges from -29°C to +121°C (-20°F to +250°F). The case uses anodized aluminum A204 for durability. Gasket material is neoprene.
This sensor resists dust and moisture effectively. Relative humidity tolerance goes to 95% noncondensing. It handles 100% humidity non-submerged with an integral cable.
The temperature coefficient of sensitivity is 0.2% per °C. Calibration load requires a 10 kΩ resistor between terminal A and B. Output measurement occurs across pins A and B.
Typical device height is 102 mm (4 inches) depending on connector option. Diameter measures 41 mm (1.6 inches) typical. Weight for model 9200-02-05-05-00 is 300 grams (10.5 ounces).
Installation Guidelines
Mount the transducer at a 45° ±2.5° angle with 4.5 Hz minimum operating frequency. Use the 1/2-inch 20 UNF-3A stud for mounting. No separate base is required for this version.
Select the terminal block top mount connector option. Ensure a 10 kΩ termination across terminal A to B. Keep the calibration orientation angle consistent during setup.
Avoid exposing the device to submerged conditions unless ordered with an integral cable. Do not exceed the 121°C maximum operating temperature for standard units.
Package Contents
Each order includes one Bently Nevada 9200-02-05-05-00 transducer. You receive the factory-sealed unit with terminal block top mount connector. The package contains the 1/2-inch 20 UNF-3A mounting stud. No calibration certificate or warranty card is included. No FedEx, UPS, or DHL labels are provided inside the box.
Frequently Asked Questions (FAQ)
1. What is the sensitivity of the Bently Nevada 9200-02-05-05-00?
The sensitivity is 20 mV/mm/s (500 mV/in/s) ±5% with proper termination and calibration angle orientation.
2. What temperature range can this two-wire velocity transducer withstand?
It operates from -29°C to +121°C (-20°F to +250°F) for storage and continuous use.
3. Does the 9200-02-05-05-00 include a mounting base?
No, this version has no mounting base. It uses a 1/2-inch 20 UNF-3A stud directly.
4. What is the maximum velocity range for this sensor?
The velocity range is 25 mm/s (1 in/s) at +22°C casing vibration at 100 Hz with a 10 kΩ load.
5. Can I use this transducer in high humidity environments?
Yes, it tolerates 95% relative humidity noncondensing and 100% non-submerged with integral cable.