ABB CI868AK01 Exchange 3BSE092691E1 IEC 61850 Interface

The ABB CI868AK01 Exchange 3BSE092691E1 is an IEC 61850 communication interface. This unit serves as an exchange replacement module for ABB systems. Specifically, the CI868AK01 Exchange includes a CI868A communication interface and a TP867 baseplate. Engineers use this module for substation automation and power system communication. For reference, the global commercial alias for this product is EXC3BSE092691R1.

Product Overview and Exchange Terms

What does the ABB CI868AK01 Exchange provide for your system? This module offers IEC 61850 protocol connectivity for substation networks. Consequently, it enables communication between intelligent electronic devices (IEDs) in substations. The module connects ABB control systems to substation networks directly. However, the exchange part requires returning the replaced component under RMA terms. Therefore, an extra charge applies if you do not return the old part.

Complete Package Contents

Your CI868AK01 Exchange shipment includes two main components. First, the CI868A communication interface provides the active electronics. Second, the TP867 baseplate offers mechanical mounting and connections. Both components work together as a complete exchange set. Thus, do not install these parts separately from each other. Always keep them as a matched pair for proper operation.

System Compatibility Requirements

Regarding software compatibility, the ABB CI868AK01 works with specific versions only. Compatible systems include 800xA 6.0.3.3 and 6.1.1 versions. Additionally, the module works with Compact Control Builder 6.0.0-3 and 6.1.1 onwards. For this reason, check your system version before purchasing this exchange module. Older or newer versions may not support this interface at all.

Physical Dimensions and Weight

Looking at the physical size, the product net depth measures 127.5 mm from front to back. Net height reaches 186 mm for the assembled unit. Meanwhile, net width stands at 59 mm for compact panel mounting. The ABB CI868AK01 weighs 0.7 kg total. Furthermore, gross volume equals 0.002 m³ for accurate shipping calculations.

Package Dimensions for Shipping

For shipping purposes, package level 1 depth measures 127.5 mm for the box. Package height reaches 186 mm for the carton. Similarly, package width stands at 59 mm for efficient storage. Package gross weight equals 0.7 kg including all packing materials. Each package contains exactly 1 piece of the exchange module.

Ordering and Logistics Information

When placing an order, the minimum quantity is 1 piece for this product. The order multiple also requires 1 piece increments for simplicity. Fortunately, this item is not made to order for standard requests. The module stocks at the Västerås, Sweden warehouse for quick shipment. Quote only status is No, meaning you can order directly without special approval. Finally, the selling unit of measure is piece for straightforward ordering.

Country of Origin and Tariff Details

Speaking of origin, the country for this module is Sweden. The customs tariff number is 85176200 for import classification purposes. Moreover, this code covers communication equipment and network interfaces. The HS code falls under networking and communication devices accordingly. Therefore, verify your local import duties before purchasing this item.

Exchange Terms and Return Conditions

Under the exchange program, the ABB CI868AK01 Exchange requires returning the replaced part. You must obtain an RMA number before sending back the old unit. After that, return the old part according to the terms and conditions. Failure to return the replaced component triggers an extra charge. Consequently, keep the original packaging for return shipping if possible.

Step-by-Step Installation Guide

Follow these steps to install your ABB CI868AK01 Exchange 3BSE092691E1 correctly.

Step 1: Verify Software Compatibility
First, check your 800xA system version before starting installation. Confirm you have version 6.0.3.3 or 6.1.1 installed. For Compact Control Builder, verify version 6.0.0-3 or 6.1.1. Do not proceed if your software version differs from these.

Step 2: Obtain RMA Authorization
Next, contact ABB support to request an RMA number for your return. Provide the serial number of your failed module to the support team. Keep this RMA number for your return shipping labels. Failure to obtain RMA may affect credit terms negatively.

Step 3: Power Down the System
Before touching any hardware, shut down the 800xA system safely. Disconnect power from the communication rack completely as a precaution. Wait for all LEDs to turn off before proceeding further. Safety must come first during this procedure.

Step 4: Remove the Old Module
After powering down, locate the existing CI868A module in your system. Disconnect all cables from the communication interface carefully. Remove the mounting screws holding the module in place. Then, carefully extract the old unit from the baseplate.

Step 5: Install the Exchange Module
Now, mount the TP867 baseplate in the designated rack location. Attach the CI868A communication interface to the baseplate securely. Secure both components with the provided mounting hardware. Finally, connect all cables back to the new ABB CI868AK01 assembly.

Step 6: Restore Communication
After installation, power up the system with the new module installed. Verify the IEC 61850 communication establishes correctly on your network. Check the status LEDs on the CI868A interface for proper operation. Lastly, return the old part to ABB using your RMA number.

Complete Package Contents

Your ABB CI868AK01 Exchange 3BSE092691E1 shipment includes the following items:

• CI868A Communication Interface (1 unit)

• TP867 Baseplate for mounting (1 unit)

• Mounting screws and hardware kit

• Product documentation and exchange instructions

Note: Shipping partners include FedEx, UPS, and DHL.

Frequently Asked Questions (FAQ)

Q1: What is the difference between CI868AK01 and CI868AK01 Exchange?
The ABB CI868AK01 Exchange requires returning your old module for replacement. The standard purchase does not have this return obligation at all. Exchange pricing assumes you send back the failed component to ABB.

Q2: Which software versions work with the CI868AK01?
Specifically, the ABB CI868AK01 works with 800xA versions 6.0.3.3 and 6.1.1. It also works with Compact Control Builder 6.0.0-3 and 6.1.1 onwards. Therefore, always check your system version before ordering this module.

Q3: What happens if I do not return the replaced part?
If you fail to return the old module, an extra charge applies. The return is required according to the terms and conditions of exchange. Always obtain an RMA number before sending back any parts to ABB.

Q4: Does the CI868AK01 include both the interface and baseplate?
Yes, the ABB CI868AK01 Exchange includes both components together. You receive a CI868A communication interface and a TP867 baseplate. Both parts come together in the same package as a matched set.

Q5: Where is the CI868AK01 manufactured and stocked?
The ABB CI868AK01 originates from Sweden as the country of origin. The product stocks at the Västerås, Sweden warehouse for distribution. Lead times depend on your shipping destination from Sweden accordingly.