Bently Nevada 200151-40-03-02 Armored Accelerometer Cable

The Bently Nevada 200151-40-03-02 is an armored accelerometer interface standard cable. This cable has connectors on both ends for easy installation. You can use it to connect accelerometers to monitoring systems in harsh environments. The armor provides extra protection against physical damage. It is designed for industrial machinery protection applications.

Technical Specifications of the 200151-40-03-02

The Bently Nevada 200151-40-03-02 has a total length of 4.0 meters. The armor option is blue cable with armor (code -03). The coupling nut is nylon type (code -02). This configuration provides enhanced durability for demanding installations.

Cable Construction

The Bently Nevada 200151-40-03-02 uses 4-conductor 22 AWG wire. A braided shield with drain wire provides noise protection. The shield coverage is 85% minimum for reliable signal integrity. The outer jacket is made of blue PVC material. The armor adds an extra layer of mechanical protection.

Connector Specifications

The connectors provide an IP67 seal to transducers and mating hardware. The Bently Nevada 200151-40-03-02 connectors are molded directly to the cable. This molding provides excellent strain relief. The coupling nuts are made of nylon for corrosion resistance. DC4 electrical insulating compound is added inside the connectors. This compound provides additional moisture protection during thermal shock.

Temperature Ratings

The operating temperature range is -20°C to +100°C. The Bently Nevada 200151-40-03-02 may be used at lower temperatures. However, the cable must not flex or bend below -20°C. Flexing below -20°C may damage the cable. The connector temperature range is -55°C to +121°C.

Minimum Bend Radius

The minimum bend radius is 63.5 mm (2.5 inches). The Bently Nevada 200151-40-03-02 should not be bent tighter than this radius. The armor requires extra care during routing. Proper routing extends cable service life.

Cure Time

The DC4 insulating compound requires 24 hours cure time. This ensures proper moisture protection. Allow full cure before exposing to harsh environments.

Installation Guidelines for the 200151-40-03-02

Route the Bently Nevada 200151-40-03-02 with a bend radius of at least 63.5 mm. Avoid flexing the cable at temperatures below -20°C. Hand-tighten the nylon coupling nuts to the mating connectors. Do not overtighten nylon nuts to prevent stripping. Allow 24 hours for the DC4 compound to cure. Keep the armored cable away from sharp edges.

Package Contents

• One (1) Bently Nevada 200151-40-03-02 armored accelerometer cable (4.0 meters)

• Connectors on both ends (pre-molded with nylon coupling nuts)

Common FAQs for the 200151-40-03-02

1. What is the length of the 200151-40-03-02 cable?
The Bently Nevada 200151-40-03-02 has a length of 4.0 meters. The armor option provides extra mechanical protection.

2. What type of coupling nuts does this cable use?
The Bently Nevada 200151-40-03-02 uses nylon coupling nuts (code -02). These resist corrosion and are non-conductive.

3. What is the operating temperature range for this cable?
The Bently Nevada 200151-40-03-02 operates from -20°C to +100°C. Do not flex the cable below -20°C to prevent damage.

4. What is the minimum bend radius for this armored cable?
The minimum bend radius is 63.5 mm (2.5 inches) for the Bently Nevada 200151-40-03-02. The armor requires careful routing.

5. What type of shielding does this cable have?
The Bently Nevada 200151-40-03-02 has a braided shield with drain wire. The shield coverage is 85% minimum for noise protection.

Why Choose the Bently Nevada 200151-40-03-02?

This armored accelerometer cable provides enhanced protection for demanding installations. The 4.0 meter length offers flexibility for machinery routing. IP67 connectors protect against moisture and dust. Nylon coupling nuts resist corrosion in harsh environments. Order the Bently Nevada 200151-40-03-02 today for your armored accelerometer cabling needs.