Atlas Copco EP11PTI80 HR13-MT-L Shut-Off Pulse Tool Overview

The Atlas Copco EP11PTI80 HR13-MT-L is a shut-off pulse tool. It belongs to the Ergopulse series from Atlas Copco. This tool provides high torque without generating reaction force. The patented TorqueBoost system delivers rapid torque buildup. Users select the EP11PTI80 HR13-MT-L for high-speed operations. The shut-off feature ensures precise stopping at correct torque values.

Technical Specifications of EP11PTI80 HR13-MT-L

The Atlas Copco EP11PTI80 HR13-MT-L delivers a fixed transducer torque of 84 Nm in CCW service. Torque range minimum is 37 ft-lb (50 Nm). Torque range maximum reaches 59 ft-lb (80 Nm). Pulse unit casing tightening torque is 35 Nm. Free speed operates at 3600 revolutions per minute. Pulsing frequency in CCW direction ranges from 13 to 20 Hz.

The tool weighs 3.7 lbs (1.68 kg). Package weight is 2.23 kg total. Length measures 201 mm for easy handling. CS distance is 30.7 mm from center to side. Output size is 1/2 inch square drive male type. Bolt size capacity is M12 mm.

Air consumption under load is 27 cubic feet per minute. Nominal working pressure is 58 psi (4 bar). Maximum working pressure reaches 72 psi (5 bar). Recommended hose size is 10 mm inner diameter. Air inlet thread is 3/8 inch standard.

The oil volume in the full pulse unit is 18.4 ml. The X-Gauge diameter measures 2 mm. Sound pressure level is 75.1 dB(A) under load. Vibration value is 2.23 m/s² according to ISO28927-2. The shut-off function stops the tool at target torque.

Installation Guidelines for Atlas Copco EP11PTI80 HR13-MT-L

Connect the EP11PTI80 HR13-MT-L to a clean air supply first. Use a 3/8 inch quick coupler on the air inlet. Install a filter-regulator-lubricator unit before the tool. Set air pressure to 58 psi (4 bar) nominal. Do not exceed 72 psi maximum working pressure.

Attach a 1/2 inch square drive socket to the output. Ensure the socket fits the M12 bolt size correctly. Apply 3 to 5 drops of oil into the air inlet daily. Check the pulse unit oil level every month. Add oil through the fill port if needed.

Hold the tool with a pistol grip posture. Do not block the air exhaust vents during operation. Keep hands away from the rotating output shaft. Use a torque reaction bar for very high torque applications.

Package Contents of EP11PTI80 HR13-MT-L

Your shipment includes these items:

One Atlas Copco EP11PTI80 HR13-MT-L pulse tool

One 1/2 inch square drive anvil installed

One 3/8 inch air inlet nipple fitting

One operation and safety manual

One bottle of pulse unit oil (100 ml)

The package does not include air hoses or couplers. You must purchase sockets separately. No carrying case is provided with this tool.

Frequently Asked Questions about EP11PTI80 HR13-MT-L

1. What is the TorqueBoost system in EP11PTI80 HR13-MT-L?

TorqueBoost is a patented system in Atlas Copco EP11PTI80 HR13-MT-L. It builds torque rapidly without reaction force. This allows one-handed operation even at 84 Nm. The system reduces operator fatigue significantly.

2. How do I set the shut-off torque on this tool?

The EP11PTI80 HR13-MT-L uses a fixed transducer setting. You cannot adjust torque in the field easily. Contact Atlas Copco service for torque reprogramming. The tool ships with 84 Nm CCW as standard.

3. What happens if I run the tool without oil?

Running Atlas Copco EP11PTI80 HR13-MT-L without oil damages the pulse unit. The pulse unit will overheat and fail quickly. Always maintain oil at 18.4 ml in the pulse unit. Use only Atlas Copco approved pulse oil.

4. Can I use EP11PTI80 HR13-MT-L for left-hand threads?

Yes, the EP11PTI80 HR13-MT-L is calibrated for CCW service. This means it tightens left-hand threaded fasteners. For right-hand threads, order the CW version instead. Check your application thread direction before purchase.

5. Is this tool safe for use in explosive atmospheres?

No, the Atlas Copco EP11PTI80 HR13-MT-L is not ATEX certified. It has no anti-static or spark-proof features. Use only in standard industrial environments. The tool meets EN ISO 11148-6:2012 safety standards.

Compliance and Application Notes

The Atlas Copco EP11PTI80 HR13-MT-L is EAC certified for Eurasian markets. It complies with EU Directive 2006/42/EC (Machinery Directive). UK Regulations S.I. 2008/1597 also apply to this tool. The country of origin is Sweden (SE). SCIP number is 9e6972b2-2f4b-487b-bd1c-d051871d8321. This tool suits automotive assembly and heavy equipment manufacturing. Use it for M12 bolts in high-volume production lines.