The FANUC A02B-0120-K342 is a Legacy control generation for industrial control and automation applications.

What the FANUC A02B-0120-K342 Connector Plug Solves

The FANUC A02B-0120-K342 is a circuit board connector plug for FANUC Series 16/18 CNC systems. It carries a 50-contact flat cable-side connector (Hirose HIF3BB-50D) and serves as a passive component powered by the host control. For maintenance teams supporting legacy CNC generations, this connector plug addresses a common pain point: sourcing the exact interface hardware when original spares are no longer catalogued. Because the part is passive, its electrical and thermal ratings follow the host CNC rather than an independent specification.

Key Specifications for Demanding Environments

• Brand: FANUC
• Model: unit
• Series: FANUC CNC accessory
• Connector: Circuit board connector plug (supplier-reported)
• Supply voltage: Not applicable (passive component; powered by host system)
• Power consumption: Not applicable (passive component; no independent power consumption)
• Operating temperature: Not applicable (passive component; rating follows host CNC)
• Storage temperature: Not applicable (passive component; rating follows host CNC)
• Relative humidity: 75%RH or less normal; up to 95%RH for short periods (≤1 month), no condensation
• Weight: ~0.03 kg (supplier-reported; family-level reference)

The humidity window is the most application-relevant environmental figure for this connector plug. In oil and gas plants, control rooms and field cabinets can see short humidity excursions during washdowns or seasonal shifts. The 95%RH short-period allowance gives maintenance planners a documented reference when assessing whether a cabinet environment remains within FANUC's stated conditions.

How Does This Connector Plug Fit Into a Legacy CNC?

This unit is a board-level connector plug, not a fieldbus module or a powered device. It mates with the flat cable side of the circuit board and carries signals between the board and the cable assembly. Because it has no built-in communication ports, it does not negotiate a protocol; it simply provides the physical contact interface. This makes it a mission-critical mechanical link: if the plug is damaged or missing, the signal path is broken regardless of the health of the surrounding electronics.

For Series 16/18 controls, the connector is part of the legacy control generation. Plants that keep these CNCs in service for older machining or process equipment often need to replace worn connectors during board-level repair. The part is passive, so there is no supply voltage or power consumption to verify at the connector itself; the host system provides all electrical energy.

Installation and Handling Guidance

Because the connector plug is a passive PCB component, installation is a board-level task. Technicians should follow the host CNC maintenance manual for board removal and cable routing. The connector is rated to follow the host CNC's operating temperature, so no separate thermal calculation is needed at the plug. However, the surrounding cabinet must remain within the host control's environmental limits. During handling, avoid bending the contact pins and keep the connector free of contamination. The 50-contact flat cable interface requires correct alignment before mating; forced insertion can damage the plug or the board header.

Maintenance and Reliability in Oil & Gas Operations

Reliability for this connector plug centers on inspection rather than scheduled replacement. Maintenance teams should inspect the plug during planned outages for contact wear, corrosion, or loose cable retention. In humid environments, the 75%RH normal limit and the short-period 95%RH allowance provide a reference for cabinet condition monitoring. If condensation is observed, the environment is outside the stated no-condensation condition and should be corrected before the connector is returned to service. Because the part weighs approximately 0.03 kg and has no independent power consumption, it adds no thermal load to the cabinet. Its field-proven role is simple: maintain a stable electrical path for the host CNC.

Frequently Asked Questions

What is the FANUC unit used for?

The FANUC unit is a circuit board connector plug for FANUC Series 16/18 CNC systems. It provides a 50-contact flat cable-side interface and is a passive component powered by the host control.

Does This unit have its own voltage or power rating?

No. The FANUC unit is a passive component, so supply voltage and power consumption are not applicable. It draws no independent power and is powered entirely by the host CNC system.

What are the humidity limits for this connector plug?

The FANUC unit follows the host CNC environmental rating. Relative humidity should be 75%RH or less under normal conditions, with up to 95%RH permitted for short periods of one month or less, and no condensation.

Is This unit still available?

The FANUC unit is a legacy spare-part connector for the Series 16/18 control generation. Please verify current lifecycle status and availability with PetroPartsOnline before ordering.

How much does the connector plug weigh?

Supplier-reported data lists a weight of approximately 0.03 kg for the connector family. This figure is a family-level reference and is not confirmed for every order code, so confirm with PetroPartsOnline for your specific requirement.

Contact PetroPartsOnline for parts suited to your application's requirements.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "A02B-0120-K342 | FANUC 50-Contact CNC Connector Plug", "mpn": "A02B-0120-K342", "sku": "A02B-0120-K342", "brand": {"@type": "Brand", "name": "FANUC"}, "description": "The FANUC A02B-0120-K342 is a Legacy control generation for industrial control and automation applications. What the FANUC A02B-0120-K342 Connector Plug Solves The FANUC A02B-0120-K342 is a circuit board connector plug for FANUC Series 16/18 CNC systems. It carries a 50-contact flat cable-side connector (Hirose HIF3BB-50D) and serves as a passive component powered by the host control. For maintenance teams supporting legacy CNC generations, this connector plug addresses a common pain point: sour", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682326-A02B-0120-K342_1__fp61b62050.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682333-A02B-0120-K342_2__fpf5487d1e.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682339-A02B-0120-K342_3__fpa963a120.jpg"], "category": "I/O Modules"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "How Does This Connector Plug Fit Into a Legacy CNC?", "acceptedAnswer": {"@type": "Answer", "text": "This unit is a board-level connector plug, not a fieldbus module or a powered device. It mates with the flat cable side of the circuit board and carries signals between the board and the cable assembly. Because it has no built-in communication ports, it does not negotiate a protocol; it simply provides the physical contact interface. This makes it a mission-critical mechanical link: if the plug is damaged or missing, the signal path is broken regardless of the health of the surrounding electronics. For Series 16/18 controls, the connector is part of the legacy control generation. Plants that keep these CNCs in service for older machining or process equipment often need to replace worn connectors during board-level repair. The part is passive, so there is no supply voltage or power consumption to verify at the connector itself; the host system provides all electrical energy."}}, {"@type": "Question", "name": "What is the FANUC unit used for?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit is a circuit board connector plug for FANUC Series 16/18 CNC systems. It provides a 50-contact flat cable-side interface and is a passive component powered by the host control."}}, {"@type": "Question", "name": "Does This unit have its own voltage or power rating?", "acceptedAnswer": {"@type": "Answer", "text": "No. The FANUC unit is a passive component, so supply voltage and power consumption are not applicable. It draws no independent power and is powered entirely by the host CNC system."}}, {"@type": "Question", "name": "What are the humidity limits for this connector plug?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit follows the host CNC environmental rating. Relative humidity should be 75%RH or less under normal conditions, with up to 95%RH permitted for short periods of one month or less, and no condensation."}}, {"@type": "Question", "name": "Is This unit still available?", "acceptedAnswer": {"@type": "Answer", "text": "The FANUC unit is a legacy spare-part connector for the Series 16/18 control generation. Please verify current lifecycle status and availability with PetroPartsOnline before ordering."}}, {"@type": "Question", "name": "How much does the connector plug weigh?", "acceptedAnswer": {"@type": "Answer", "text": "Supplier-reported data lists a weight of approximately 0.03 kg for the connector family. This figure is a family-level reference and is not confirmed for every order code, so confirm with PetroPartsOnline for your specific requirement. Contact PetroPartsOnline for parts suited to your application's requirements."}}]}]}