Meggitt Vibro-Meter 111-403-000-013 Proximity Measuring System

The Meggitt (Vibro-Meter) 111-403-000-013 is a proximity measuring system with an extended body length. This device uses the eddy-current principle for non-contact measurement. You can use it for shaft relative vibration monitoring. It also works for gap and position measurement in machinery. This system conforms to API 670 recommendations for protection systems.

Technical Specifications of the 111-403-000-013

The Meggitt (Vibro-Meter) 111-403-000-013 with option A1 is the standard version. The transducer requires a high-frequency power source. This comes from an IQS900 signal conditioner. The transducer is an 8 mm wire coil construction. The tip is made of Torlon (polyamide-imide). The body is encapsulated in stainless steel AISI 316L with high-temperature epoxy glue.

Mechanical Configuration

The body thread on the Meggitt (Vibro-Meter) 111-403-000-013 is M10 x 1. This provides standard metric mounting for many applications. The body length is 86 mm. This extended length suits deeper mounting requirements. The unthreaded length is 0 mm minimum.

Cable Specifications

The integral cable length is 5.0 meters with ±500 mm tolerance. The total system length is 5 meters. The cable uses FEP covered 70 Ohm coaxial type. The cable diameter is 3.6 mm. The Meggitt (Vibro-Meter) 111-403-000-013 has no optional protection (F0) and no flexible hose (G000).

Connector Specifications

The connectors are self-locking miniature coaxial type. Hand-tighten these connectors until locked. Do not use tools for tightening. This ensures proper connection without damage.

Temperature Ranges

The transducer operates from -40°C to +180°C with drift below 5%. Short-term survival from +180°C to +220°C has drift above 5%. The cable and connector operate from -40°C to +200°C.

Environmental Ratings

The head of the proximity transducer is rated IP68. This includes the transducer tip and integral cable. Vibration tolerance is 5g peak between 10 and 500 Hz. Shock acceleration tolerance is 15g peak. This uses a half sine-wave with 11 ms duration.

Measurement and Performance

The frequency response goes from DC to 20 kHz at -3 dB. The measurement range options are 2 mm or 4 mm. The system offers voltage or current output with short circuit protection. The design is temperature-compensated for stable readings.

Installation Guidelines for the 111-403-000-013

Mount the Meggitt (Vibro-Meter) 111-403-000-013 using the M10 x 1 thread. Ensure the 86 mm body length fits your deep mounting hole. Hand-tighten all coaxial connectors until locked. Keep the probe tip clean for accurate measurements. Route the cable away from high-voltage wires. This system is ideal for VM600Mk2, VM600, and VibroSmart monitoring systems.

Package Contents

• One (1) Meggitt (Vibro-Meter) 111-403-000-013 proximity transducer with 5.0m integral cable

• Mounting instructions

Common FAQs for the 111-403-000-013

1. What is the body length on this model?
The Meggitt 111-403-000-013 has an 86 mm body length. This extended length suits deeper mounting applications.

2. What is the body thread size?
The Meggitt 111-403-000-013 has an M10 x 1 body thread. This provides standard metric mounting.

3. What is the cable length of this proximity system?
The Meggitt 111-403-000-013 has a 5.0 meter integral cable. The total system length is 5 meters.

4. What is the operating temperature range for the transducer?
The Meggitt 111-403-000-013 transducer operates from -40°C to +180°C. Drift stays below 5% within this range.

5. Is this system compliant with API 670 standards?
Yes, the Meggitt 111-403-000-013 conforms to API 670 recommendations. This makes it suitable for machinery protection systems.

Why Choose the Meggitt Vibro-Meter 111-403-000-013?

This proximity measuring system features an 86 mm extended body length. The long body design suits deeper mounting configurations. The API 670 compliance ensures critical turbomachinery protection. The 5.0 meter cable provides flexible installation options. Order the Meggitt (Vibro-Meter) 111-403-000-013-A1-B1-C086-D000-E050-F0-G000-H05 today for your deep-mount vibration monitoring needs.