The Allen-Bradley 25A-E1P7N104 is a AC adjustable-frequency drive — PowerFlex 523 for industrial control and automation applications.

The Allen-Bradley 25A-E1P7N104 is a PowerFlex 523 AC adjustable-frequency drive rated 0.75 kW (1 HP) in both normal duty and heavy duty, with 1.7 A continuous output current at 525…600V AC three-phase input. A maintenance team facing nuisance trips on a 600V pump motor can use this Frame A drive to hold speed without adding panel space, because it measures 152.0 H × 72.0 W × 172.0 D mm and weighs 1.1 kg.

What makes the 25A-E1P7N104 suited to oil and gas duty?

This PowerFlex 523 member of the PowerFlex 520-series platform is engineered for harsh oil and gas environments. Its IP20 NEMA/Open Type enclosure mounts in a panel, and the drive operates from -20…+50 °C without derating in vertical IP20 mounting. Above that, operation extends to +60 °C with derating or to +70 °C with the 25-FANx-70C control module fan kit. The published 53 dBA sound pressure level for Frame A, measured 1 m from the drive, keeps control rooms quieter.

Electrical headroom matters on unstable field supplies. Input voltage tolerance is -15 % / +10 %, input frequency spans 47…63 Hz, and power ride-through is 100 ms. Displacement power factor is 0.98 across the entire speed range, while typical efficiency reaches 97.5 %. The integral brake IGBT is fitted, and dynamic braking needs an external brake resistor.

Key specifications at a glance

• Supply voltage: 525…600V AC, 3-phase.
• Rated output: 0.75 kW (1 HP) normal duty and heavy duty.
• Continuous output current: 1.7 A maximum at rated output voltage.
• Output frequency: 0…500 Hz programmable.
• Operating temperature: -20…+50 °C without derating, vertical IP20 mounting.
• Control methods: Volts/Hertz, sensorless vector control and Economizer SVC.
• Carrier frequency: 2…16 kHz, with the published rating based on 4 kHz.
• Enclosure: IP20 NEMA/Open Type, Frame A, panel mount.
• Communication: 1 × RS-485 DSI port on RJ45 terminal C1.
• Certification: c-UL-us Listed to UL 508C and CSA C22.2 No. 274.

How does the drive integrate with existing control networks?

The built-in RS-485 DSI port supports Modbus RTU function codes 03, 06 and 16, with data rates from 1200…38400 bit/s and node addresses from 1…247. Communication-loss handling can fault, coast, stop or continue last, with a loss time of 0.1…60.0 s. Only pins 4 and 5 of the RJ45 connector carry the network, so other pins must stay unconnected.

For EtherNet/IP, DeviceNet, PROFIBUS DP-V1 or PROFINET, the 520-series communication adapters listed in the technical data are required. An integration note: wiring into such fieldbus networks may require an external gateway or connection module, and cables or gateways should be confirmed with the supplier. The drive also accepts one communication option card without changing its footprint.

Where does this drive fit in field applications?

Typical duty includes variable-torque fans, centrifugal pumps and small conveyors on production skids. Because the 523 supports sensorless vector control with ±0.5 % speed regulation across a 100:1 range, it holds speed on changing loads without encoder feedback. The drive does not support encoder options, closed-loop vector or permanent-magnet motor control. In a hypothetical water-injection skid, a 600V motor could run from this unit while Modbus RTU reports status to a supervisory system.

Installation and environmental limits

Frames A through C accept DIN-rail or screw mounting. The drive requires a pollution degree 1 or 2 environment, relative humidity of 0…95 % non-condensing, and altitude up to 1000 m without derating. Above that, derating applies up to 4000 m, except 600V drives are limited to 2000 m. The earthing conductor must suit high protective-earthing-current equipment because leakage current exceeds 3.5 mA AC and/or 10 mA DC.

No integral EMC filter is fitted, so external filters provide EN 61800-3 Category C1/C2/C3 compliance. The drive is not intended for public low-voltage networks supplying domestic premises without additional mitigation. For parts suited to your application's requirements, contact PetroPartsOnline.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "25A-E1P7N104 | Allen-Bradley 0.75 kW 525-600V AC Drive", "mpn": "25A-E1P7N104", "sku": "25A-E1P7N104", "brand": {"@type": "Brand", "name": "Allen-Bradley"}, "description": "The Allen-Bradley 25A-E1P7N104 is a AC adjustable-frequency drive — PowerFlex 523 for industrial control and automation applications. The Allen-Bradley 25A-E1P7N104 is a PowerFlex 523 AC adjustable-frequency drive rated 0.75 kW (1 HP) in both normal duty and heavy duty, with 1.7 A continuous output current at 525…600V AC three-phase input. A maintenance team facing nuisance trips on a 600V pump motor can use this Frame A drive to hold speed without adding panel space, because it measures 152.0 H", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1793852875-25A-E1P7N104_1__fpb3a7ecce.jpg"], "category": "Drives & Motion Control"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What makes the 25A-E1P7N104 suited to oil and gas duty?", "acceptedAnswer": {"@type": "Answer", "text": "This PowerFlex 523 member of the PowerFlex 520-series platform is engineered for harsh oil and gas environments. Its IP20 NEMA/Open Type enclosure mounts in a panel, and the drive operates from -20…+50 °C without derating in vertical IP20 mounting. Above that, operation extends to +60 °C with derating or to +70 °C with the 25-FANx-70C control module fan kit. The published 53 dBA sound pressure level for Frame A, measured 1 m from the drive, keeps control rooms quieter. Electrical headroom matters on unstable field supplies. Input voltage tolerance is -15 % / +10 %, input frequency spans 47…63 Hz, and power ride-through is 100 ms. Displacement power factor is 0.98 across the entire speed range, while typical efficiency reaches 97.5 %. The integral brake IGBT is fitted, and dynamic braking needs an external brake resistor."}}, {"@type": "Question", "name": "How does the drive integrate with existing control networks?", "acceptedAnswer": {"@type": "Answer", "text": "The built-in RS-485 DSI port supports Modbus RTU function codes 03, 06 and 16, with data rates from 1200…38400 bit/s and node addresses from 1…247. Communication-loss handling can fault, coast, stop or continue last, with a loss time of 0.1…60.0 s. Only pins 4 and 5 of the RJ45 connector carry the network, so other pins must stay unconnected. For EtherNet/IP, DeviceNet, PROFIBUS DP-V1 or PROFINET, the 520-series communication adapters listed in the technical data are required. An integration note: wiring into such fieldbus networks may require an external gateway or connection module, and cables or gateways should be confirmed with the supplier. The drive also accepts one communication option card without changing its footprint."}}, {"@type": "Question", "name": "Where does this drive fit in field applications?", "acceptedAnswer": {"@type": "Answer", "text": "Typical duty includes variable-torque fans, centrifugal pumps and small conveyors on production skids. Because the 523 supports sensorless vector control with ±0.5 % speed regulation across a 100:1 range, it holds speed on changing loads without encoder feedback. The drive does not support encoder options, closed-loop vector or permanent-magnet motor control. In a hypothetical water-injection skid, a 600V motor could run from this unit while Modbus RTU reports status to a supervisory system."}}]}]}