TR CEV65M-01360 Absolute Rotary Encoder – Technical Overview
The TR CEV65M-01360 absolute rotary encoder provides high-resolution position feedback. This device suits demanding industrial automation and motion control tasks. Users benefit from its programmable features and robust SSI interface. The TR CEV65M-01360 ensures reliable data output in harsh environments.
Key Technical Specifications
This encoder delivers 8,192,000 steps per revolution. It supports 4,096,000 total revolutions. The SSI interface enables fast and safe data transfer. You can program the output code using WINPROG software. The supply voltage range spans from 11V to 27V DC. Output level follows RS422 standard for noise immunity.
The unit holds an IP65 protection class. It withstands dust and low-pressure water jets. Operating temperature ranges from -20°C to +70°C. This ensures stable performance in most factory floors. The flange type is ZB36 with a 10FL/19.5 shaft design. The connector uses a 12-pin contact type placed radially on the housing. Pinout follows ST185E configuration. A mating plug comes included.
Programmable Functions and Options
You can program the encoder using the WINPROG tool. This allows field adjustments without replacing hardware. The code is fully programmable per application needs. Options include ENC F/R for direction control. Additional options are ENC PRESET 1+2 for preset values. The device also supports ENC PROGRAMMABLE (WINPROG) as a key feature.
The firmware number is 437860. Parameter file is CE816-095. Drawing number 04-CEV65M-M0021 and version 158 define the mechanical build. Documentation follows DOKUMENTE standards. The AL code is N and ECCN is N for export control.
Environmental and Mechanical Durability
This encoder shows strong resistance to electrical noise. Its RS422 output level rejects common interference. The IP65 rating protects internal electronics. You can install it near motors or hydraulic systems. The wide temperature range supports both cold and warm climates. Vibration and shock tolerance follow industrial encoder standards. The ZB36 flange ensures stable mounting on standard shafts.
Installation Guide
Follow these steps for correct installation:
Clean the shaft and mounting surface before installation.
Slide the TR CEV65M-01360 gently onto the 10FL/19.5 shaft.
Tighten the flange bolts evenly to avoid misalignment.
Connect the 12-pin radial connector per ST185E pinout.
Use the included mating plug to secure the cable connection.
Apply power between 11V and 27V DC to the supply pins.
Use WINPROG software to set steps and code direction.
Verify output signals via an oscilloscope or controller readout.
Do not hammer or force the encoder onto the shaft. Keep cables away from high-voltage lines. Avoid exceeding +70°C ambient temperature during operation.
Package Contents
The product box includes the following items:
One TR CEV65M-01360 absolute rotary encoder unit
One mating plug for the 12-pin radial connector
One quick start guide (English)
One mounting screw set for ZB36 flange
One dust cap for the connector during storage
No certificates or warranty documents appear inside the box. No delivery method like FedEx, UPS, or DHL is listed.
H3: Common FAQs (3-5 questions)
Q1: Can I change the resolution after installation?
Yes, you can reprogram the steps per revolution using WINPROG software. The TR CEV65M-01360 supports field programming without disassembly.
Q2: Does this encoder work with a Siemens PLC?
Yes, the SSI interface and RS422 output connect to most PLCs. Siemens, Allen-Bradley, and others support SSI input modules.
Q3: What happens if I reverse the power supply?
Reversing power above 27V may damage internal circuits. Always check polarity before connecting the 11-27V supply.
Q4: Is the mating plug waterproof?
The included plug maintains IP65 rating when properly tightened. Use a suitable cable gland for outdoor or wet areas.
Q5: How do I reset the encoder to factory settings?
Use WINPROG to load the original parameter file CE816-095. This restores default code and revolution settings.
H3: Summary for Buyers
The TR CEV65M-01360 absolute rotary encoder delivers high step counts. It offers flexible programming and strong environmental protection. The SSI interface ensures reliable data transfer. Its IP65 rating suits factory automation, robotics, and heavy machinery. Choose this model for precise position feedback with easy configuration.
This document provides technical data only. Always refer to the original documentation number DOKUMENTE for full safety details.
Customer Reviews