Bently Nevada 200151-60-02-10 Accelerometer Cable 6m Enhanced Nut
Introduction:
The Bently Nevada 200151-60-02-10 is an accelerometer interface standard cable. It features connectors on both ends with IP67 sealing. The cable length is 6.0 meters without armor. Enhanced coupling nuts provide better grip for tightening. This cable works with Bently Nevada accelerometers and transducers.
Customer Reviews
UBEST Automation – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Product Attributes:
Notice: For real-time prices and inventory, please click the button below to contact us.
Technical Specifications
The Bently Nevada 200151-60-02-10 provides reliable signal transmission for accelerometer sensors. This cable uses a 4-conductor, 22 AWG construction for low signal loss. The braided shield with drain wire offers 85% minimum coverage for noise rejection. The PVC outer jacket provides flexibility and durability.
Cable Construction
| Parameter | Specification |
|---|---|
| Conductor Count | 4 conductors |
| Conductor Gauge | 22 AWG |
| Shielding | Braided shield with drain wire |
| Shield Coverage | 85% minimum |
| Outer Jacket Material | PVC |
| Coupling Nut Material | Nickel-plated |
| Armor Type | No armor (blue cable without armor, option -02) |
Length and Options
Model Base: 200151 - Accelerometer Interface Standard Cable.
Cable Length Option: -60 = 6.0 meters (19.7 feet).
Armor Option: -02 = Blue cable without armor for standard flexibility.
Coupling Nut Option: -10 = Enhanced coupling nut for better grip.
The -60 length option gives you 6.0 meters of reach. This suits large machinery where monitors sit far from measurement points. The -02 armor option removes the outer armor layer. Your cable stays flexible and easier to route in tight spaces.
Enhanced Coupling Nut (-10 Option)
The enhanced coupling nut (-10 option) provides a better grip for tightening. This feature appears on both ends of the cable. You get easier installation in hard to reach locations. The improved grip reduces the risk of loose connections. Field technicians can hand tighten with confidence even wearing gloves.
Environmental Specifications
Operating Temperature: -20°C to +100°C (-4°F to +212°F).
Extended Low Temperature Use: Cables can operate below -20°C if not flexed or bent.
Temperature Limit Warning: Flexing below -20°C (-4°F) may damage the cables.
Connector Seal Rating: IP67 when mated to transducers and hardware.
Connector Molded Type: Connectors are molded directly to the cable.
Minimum Bend Radius
The 200151-60-02-10 requires a minimum bend radius of 63.5 mm (2.5 inches). Do not bend the cable tighter than this radius. Sharp bends will damage internal conductors and shielding. The non-armored design allows slightly easier bending than armored versions.
Connector Sealing and Protection
The connectors provide an IP67 seal to transducers and mating hardware. This prevents dust and water ingress at the connection points. The molded connector design eliminates weak points at cable entry points.
The addition of DC4 electrical insulating compound in the connectors provides extra protection. This compound blocks moisture during thermal shock events. Your signal integrity stays reliable even with rapid temperature changes.
Mechanical Specifications
Cure Time: 24 hours for the sealing compound to fully set.
Storage Temperature Range: -55°C to +121°C (-67°F to +250°F).
Construction Type: 4-conductor with braided shield and drain wire.
Coupling Nut Type: Enhanced grip on both ends (-10 option).
Installation Guidelines
Follow these steps to install your Bently Nevada 200151-60-02-10 cable correctly.
Inspect the Cable – Check for cuts, kinks, or damage to the PVC jacket.
Plan the Route – Keep bend radius larger than 63.5 mm (2.5 inches).
Connect to Transducer – Screw the connector onto the accelerometer firmly.
Tighten Enhanced Nut – Use the better grip of the -10 nut for secure tightening.
Route the 6.0m Cable – Keep away from high voltage lines and heat sources.
Secure the Cable – Use non-metallic cable ties every 0.5 meters.
Connect to Monitor – Attach the second enhanced nut connector to the monitoring device.
Verify IP67 Seal – Ensure both connectors are fully seated.
Do not flex the 200151-60-02-10 below -20°C (-4°F). Cold flexing will crack the PVC jacket and damage conductors. Allow the cable to warm to room temperature before handling in cold conditions.
Temperature Handling Precautions
| Condition | Action Required |
|---|---|
| Below -20°C (-4°F) | Do not flex or bend the cable |
| -20°C to +100°C | Normal operation with flexing allowed |
| Above +100°C | Do not exceed maximum rating |
| Storage -55°C to +121°C | Acceptable for non-operating storage |
Enhanced Nut Installation Tips
The enhanced coupling nut (-10) offers several installation advantages.
Better grip surface – Easier to turn with gloved hands.
Increased torque capability – Tighter connection without slipping.
Same connector fit – Compatible with all standard accelerometers.
Both ends equipped – Consistent quality at sensor and monitor sides.
Package Contents (No Certificates or Warranty Terms)
Your shipment for product number 200151-60-02-10 includes the following items:
1 x Bently Nevada 200151-60-02-10 Accelerometer Cable (6.0m length)
1 x Connector on each end (pre-molded to cable)
2 x Enhanced coupling nuts (one on each connector, -10 option)
1 x Plastic protective bag for storage
Frequently Asked Questions (FAQ)
1. What is the difference between standard and enhanced coupling nuts?
The enhanced coupling nut (-10) provides better grip surface for tightening. You get easier installation in tight spaces, especially when wearing work gloves.
2. Which accelerometers work with the Bently Nevada 200151-60-02-10 cable?
This 200151 series cable works with Bently Nevada accelerometers and seismic transducers. The -10 enhanced nuts fit the same connectors as standard nuts.
3. Why choose the non-armored version (-02) for a 6.0 meter cable?
The non-armored version stays more flexible over long 6.0 meter runs. You can route the cable around obstacles more easily than armored cables.
4. Can I use this cable at temperatures below -20°C?
Yes, but only if the cable does not flex or bend. The 200151-60-02-10 can operate at -55°C in static installations. Flexing below -20°C will damage the cable.
5. How long does the DC4 compound take to cure fully?
The DC4 electrical insulating compound requires 24 hours for complete curing. Avoid disturbing the connectors during this cure period.
6. Is the 6.0 meter length suitable for large machinery monitoring?
Yes. The 6.0 meter length reaches from large turbines and compressors to remote monitor panels. This reduces the need for extension cables and junction boxes.
Why Choose This Model?
The Bently Nevada 200151-60-02-10 offers long reach with easy installation. Its 6.0 meter length connects distant sensors to monitoring panels without extra hardware. The non-armored design (-02) keeps the cable flexible for routing around machine components. The enhanced coupling nuts (-10) provide better grip for gloved hands in tight spaces. The 4-conductor, 22 AWG construction with 85% braided shield rejects electrical noise effectively. The IP67 sealed connectors with DC4 compound resist moisture during thermal shocks. Choose this 200151-60-02-10 for large turbine trains, compressor stations, and extended pump monitoring in power plants, refineries, and heavy industrial facilities.