The FANUC A02B-0120-K845 is a Legacy control generation for industrial control and automation applications.

FANUC A02B-0120-K845 is a control power cable built for the FANUC Series 16 CNC platform. Because it is a passive component, its electrical and environmental ratings follow the host CNC rather than an independent specification. That single fact drives most of the cost logic around this part: the cable carries power inside an existing control architecture, so its value is measured in uptime and avoided rework, not in standalone performance figures.

What does the A02B-0120-K845 control power cable do in a Series 16 CNC?

The cable provides the control power connection within a FANUC Series 16 CNC system. FANUC lists it under the Series 16 CNC family, and supplier reporting describes it as a Series 16 control power cable. It has no built-in communication ports and no independent power consumption. In practice, it is one of the small, mission-critical links that keep a legacy control generation running.

For maintenance planners, that role matters more than the part's modest footprint. A failed control power cable can stop a machine that is otherwise serviceable, and the cost of that stoppage usually dwarfs the cost of the cable itself. Keeping the correct part identified and on hand is therefore a reliability decision as much as a purchasing one.

Technical specifications and cost implications

• Brand: FANUC
• Model: unit
• Series: FANUC Series 16 CNC
• Function: Series 16 control power cable (multi-source consensus; supplier-reported)
• Supply voltage: Not applicable (passive component; cable/connector/fuse/memory card; powered by host system)
• Power consumption: Not applicable (passive component; no independent power consumption)
• Operating temperature: Not applicable (passive component; rating follows host CNC)
• Storage temperature: Not applicable (passive component; rating follows host CNC)
• Relative humidity: Not applicable (passive component; rating follows host CNC)
• Dimensions (H×W×D): Not applicable (cable; no module enclosure dimensions)
• Lifecycle: Legacy (control power cable for FANUC Series 16 CNC; Series 16 is a legacy control generation) (Last verified: 2026-09)

Each of these entries carries a cost message. The absence of an independent supply voltage rating means the cable adds no separate power budget to the cabinet, so there is no extra supply hardware to specify or maintain. Because power consumption is not applicable, the cable contributes nothing to thermal load calculations. Temperature and humidity ratings follow the host CNC, which means environmental planning should focus on the control enclosure rather than on the cable as a separate item. The missing enclosure dimensions reflect the part's nature as a cable, so there is no panel space to reserve. Finally, the legacy lifecycle status is the strongest cost signal: sourcing the correct cable for an aging Series 16 control protects the investment already made in that platform.

Why operating temperature, input voltage and power supply are host-defined

Engineers often ask for a cable's own temperature range or voltage rating. For this part, those values are not published as independent specifications because the cable is passive. Its operating temperature, storage temperature and relative humidity ratings follow the host CNC. Its supply voltage is supplied by the host system, and its power consumption is not applicable.

This has a practical cost consequence. When the host control is kept within its own environmental limits, the cable needs no separate derating study or additional thermal management. Maintenance teams can therefore spend their inspection effort on the control cabinet and connectors, where the real operating conditions are set. That focus avoids unnecessary work and keeps reliability spending aimed at the components that actually define the environment.

How does the legacy status affect maintenance planning?

FANUC identifies Series 16 as a legacy control generation, and this cable belongs to that family. Legacy status does not change how the cable functions, but it does change how spares should be managed. As platforms age, the practical risk shifts from performance to availability of correct replacement parts.

For a plant running Series 16 controls, the cost of an unplanned stop can quickly exceed the price of a spare cable. Identifying the right part number now, and confirming its availability with a reliable supplier, is a low-cost way to reduce that exposure. PetroPartsOnline focuses on sourcing for critical operations, so buyers can verify current lifecycle status and availability before a failure forces the issue.

Installation and handling guidance

Because the cable is a passive component powered by the host system, installation should follow the CNC builder's documentation for the Series 16 control. Route the cable to avoid mechanical strain and keep connectors clean and properly seated. Do not modify or repair the cable in the field; replacement is the dependable path when damage is found.

During commissioning, verify that the host control's environmental conditions are within its own published limits, since the cable's temperature and humidity ratings follow the host. This step protects both the cable and the control electronics, and it avoids repeat callouts that erode maintenance budgets.

Reliability and sourcing for demanding environments

Oil and gas and other demanding environments put a premium on parts that behave predictably. This cable is built for demanding environments in the sense that it operates as part of a rugged, field-proven control platform, with no independent electronics to fail. Its reliability contribution comes from correct selection and proper routing rather than from standalone specifications.

PetroPartsOnline offers application-specific selection guidance so buyers can match the cable to their Series 16 application. Contact PetroPartsOnline for parts suited to your application's requirements.

{"@context": "https://schema.org", "@graph": [{"@type": "Product", "name": "A02B-0120-K845 | FANUC Series 16 CNC Control Power Cable", "mpn": "A02B-0120-K845", "sku": "A02B-0120-K845", "brand": {"@type": "Brand", "name": "FANUC"}, "description": "The FANUC A02B-0120-K845 is a Legacy control generation for industrial control and automation applications. FANUC A02B-0120-K845 is a control power cable built for the FANUC Series 16 CNC platform. Because it is a passive component, its electrical and environmental ratings follow the host CNC rather than an independent specification. That single fact drives most of the cost logic around this part: the cable carries power inside an existing control architecture, so its value is measured in uptime", "image": ["https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682784-A02B-0120-K845_1__fp6ac2755c.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682789-A02B-0120-K845_2__fpcf1f2300.jpg", "https://www.petropartsonline.com/wp-content/uploads/2026/11/1793682795-A02B-0120-K845_3__fp688ca38a.jpg"], "category": "I/O Modules"}, {"@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What does the A02B-0120-K845 control power cable do in a Series 16 CNC?", "acceptedAnswer": {"@type": "Answer", "text": "The cable provides the control power connection within a FANUC Series 16 CNC system. FANUC lists it under the Series 16 CNC family, and supplier reporting describes it as a Series 16 control power cable. It has no built-in communication ports and no independent power consumption. In practice, it is one of the small, mission-critical links that keep a legacy control generation running. For maintenance planners, that role matters more than the part's modest footprint. A failed control power cable can stop a machine that is otherwise serviceable, and the cost of that stoppage usually dwarfs the cost of the cable itself. Keeping the correct part identified and on hand is therefore a reliability decision as much as a purchasing one."}}, {"@type": "Question", "name": "How does the legacy status affect maintenance planning?", "acceptedAnswer": {"@type": "Answer", "text": "FANUC identifies Series 16 as a legacy control generation, and this cable belongs to that family. Legacy status does not change how the cable functions, but it does change how spares should be managed. As platforms age, the practical risk shifts from performance to availability of correct replacement parts. For a plant running Series 16 controls, the cost of an unplanned stop can quickly exceed the price of a spare cable. Identifying the right part number now, and confirming its availability with a reliable supplier, is a low-cost way to reduce that exposure. PetroPartsOnline focuses on sourcing for critical operations, so buyers can verify current lifecycle status and availability before a failure forces the issue."}}]}]}