Product Overview

The TR-Electronic ADP-010 485-00230 is a high-performance SSI display unit. This device reads and programs single-turn or multi-turn encoders. It offers a clear 6-decade LED display for direct value feedback. You can use this unit to set scaling factors and offset values. It also detects maximum and minimum values automatically. This model is perfect for industrial automation tasks requiring precise position feedback.

Technical Specifications

The TR-Electronic ADP-010 485-00230 supports a resolution from 10 to 25 bits. It works with both binary and gray SSI codes. The clock output uses a RS422 / RS485 driver. The clock input uses a RS422 / RS485 receiver. The data input also uses a RS422 / RS485 receiver.

Master Mode Features:

• The internal clock frequency is 100 kHz or 200 kHz.

• The conversion rate is about 28 values per second.

Slave Mode Features:

• The external clock frequency goes up to 125 kHz max.

• The break of clock brushes is at least 500 µs.

• The conversion rate remains about 28 values per second.

Digital User Inputs:

• The unit includes 2 programmable digital inputs.

• These inputs have a 10 kΩ resistance to +5V.

• The logic type is NPN, with a maximum of 30V.

• Signal levels: L-level < 0.4V / H-level > 3.5V.

Alarm Outputs:

• There are 2 relay alarm outputs on the TR-Electronic ADP-010 485-00230.

• You can program these as opened or closed contacts.

• Two front LEDs provide clear visual signaling.

• Switch voltage rating: 250V AC / 250V DC.

• Switch current rating: 5A AC / 5A DC.

• Switch power: 750 VA / 100 W.

Optional Analog Output:

• The optional output has a 16-bit resolution.

• Accuracy is ± 0.2% of the final value.

• Voltage range: 0/2 – 10V, max. 10mA.

• Current range: 0/4 – 20mA, max. 500Ω.

• Isolation voltage: 3 kV for 1 minute.

Optional Interface (RS 485, RS 422, TTY):

• The protocol follows DIN 66 019 / ISO 1745.

• Baud rates: 300, 1200, 2400, 4800, 9600, 19200.

• Data format: 1 Start, 8 Data, N-Parity, 1 Stop.

• Isolation voltage: 1.6 kV for 1 minute.

Power Supply Details

AC Version (Standard):

• Input range: 95…250 V AC.

• Power consumption: approx. 9 VA.

• Isolation voltage: 2.5 kV for 1 minute.

• Encoder power supply: 24 V DC ±10%, max. 125 mA.

• Encoder isolation voltage: 500 V for 1 minute.

DC Version (Optional):

• Input range: 18…36 V DC.

• Power consumption: approx. 70mA.

• Isolation voltage: 500V for 1 minute.

Environmental and Physical Data

The TR-Electronic ADP-010 485-00230 operates from 0 to 50°C. It stores safely from -20 to +70°C. Humidity tolerance is below 80% (non-condensing). The unit meets protection class II standards. Front protection is IP 54. Connector protection is IP 20. This device suits class 2 applications with over-voltage protection II. It fully complies with CE standards 89/336/EWG and NSR 73/23/EWG.

Display and Interface:

• The red LED display has 6 decades and 14 mm height.

• You can program the decimal point position.

• The unit uses preliminary zero suppression.

• A minus sign appears for negative values.

• The front membrane keyboard includes push buttons.

Housing and Mounting:

• The case is a switch board housing per DIN 43 700.

• Dimensions (W x H x D): 96 x 48 x 141 mm.

• Mounting depth: 148 mm including the screw terminal.

• Mounting type: standard switch board mounting.

• Connection type: plug-in screw terminal.

Installation Guide

Follow these steps to install the TR-Electronic ADP-010 485-00230:

1. Cut a panel opening of 92 x 45 mm.

2. Insert the unit from the front of the panel.

3. Secure it using the provided mounting brackets.

4. Connect the SSI signals to the plug-in screw terminal.

5. Wire the power supply (95-250V AC or 18-36V DC).

6. Connect your encoder output to the 24V DC terminal (AC version only).

7. Attach any digital inputs or relay outputs as needed.

8. Apply power and check the LED indicators.

Package List

• 1 x TR-Electronic ADP-010 485-00230 main unit

• 1 x plug-in screw terminal connector set

• 2 x panel mounting brackets

• 1 x quick start guide (multi-language)

Frequently Asked Questions (FAQ)

1. Can the TR-Electronic ADP-010 485-00230 work with multi-turn encoders?
Yes, it supports both single-turn and multi-turn SSI encoders. The resolution range is 10 to 25 bits.

2. How do I reset the stored MAX and MIN values on this unit?
The unit has an auto-reset function for MAX and MIN values. You can also program one of the digital inputs to trigger a manual reset.

3. What happens during a loss of SSI signal on the ADP-010 485-00230?
The display shows a specific error message. The two relay alarms can activate based on your programmed settings.

4. Does this display unit require an external encoder power supply?
No, the AC version provides a 24V DC output for the encoder. The DC version does not include this feature.

5. What is the maximum cable length for the SSI input?
Use RS422 differential signals for the SSI input. The maximum recommended cable length is 300 meters at 100 kHz.